Iancu, F., Zhu, X., Tang, Y., Aslam, D., Müller N.. “Design and Fabrication of Microchannel Test Rig for Ultra-Micro Wave Rotors”
Journal of Microsystem Technologies, 2007, DOI 10.1007/s00542-007-0402-5.
Müller, N., et al. “An Electric Flight Concept”
3rd International Symposium on Innovative Aerial/Space Flyer Systems, Tokyo, Nov 2006, pp 73-80.
Akbari, P., Nalim, M. R., Müller, N. “A Review of Wave Rotor Technology and Its Applications”
ASME Journal of Engineering for Gas Turbines and Power, 2006, Vol. 128, pp 717-735.
Kharazi, A. A., Akbari, P., Müller, N. “Analysis and Performance Prediction of an R-718 Compression Cycle with a 3-Port Condensing Wave Rotor”
ASME Journal of Energy Resources Technology, 2006, Vol. 128, pp 325-334.
Dempsey E., Akbari, P., Nalim, M. R., Müller N. “Performance Optimization of Gas Turbines Utilizing Four-Port Wave Rotors”
4th International Energy Conversion Engineering Conference and Exhibit,
AIAA Paper 2006-4152, San Diego, Jun 2006.
Akbari, P., Nalim, M. R., Müller, N. “Performance Enhancement of Microturbine Engines Topped with Wave Rotors”
ASME Journal of Engineering for Gas Turbines and Power, 2006, Vol. 128, pp 190-202.
Iancu F., Müller, N. “Efficiency of Shock Wave Compression in a Microchannel”
Journal of Microfluidics and Nanofluidics, 2005, Vol. 2 No. 1, pp 50-63.
Iancu F., Piechna, J., Dempsey E., Müller N. “Ultra-Micro Wave Rotor Investigations”
PowerMEMS 2005 - 5th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications, Tokyo, Nov 2005, pp 93-96.
Iancu F., Piechna, J., Dempsey E., Müller N. “The Ultra-micro Wave Rotor Research at Michigan State University”
2nd International Symposium on Innovative Aerial/Space Flyer Systems, Tokyo,
Dec 2005, pp 65-70.
Dempsey E., Akbari P.,
Müller, N. “Optimum Applications of Four-Port Wave Rotors for Gas Turbines Enhancement”
17th International Symposium on Air Breathing Engine, ISABE Paper 2005-1214, Munich, Sep 2005.
Hîrceagã, M., Iancu, F. Müller, N. “Wave Rotors Technology and Applications”
11th International Conference on Vibration Engineering, Timişoara, Romania, Sep 2005.
Kilicarslan A.,,
Müller, N. “A Comparative study of water as a refrigerant with some current refrigerants”
International Journal of Energy Research, 2005, Vol. 29, p 947-959.
Kharazi, A. A., Akbari, P.,
Müller, N. “Preliminary Study of a Novel R718 Compression Refrigeration Cycle Using a 3-Port Condensing Wave Rotor”
ASME Journal of Engineering for Gas Turbines and Power, July, 2005,
Vol. 127, p 539-544..
Akbari,
P.,
Müller, N. “Wave Rotor Research Program at Michigan State University”
41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,
AIAA Paper 2005-3844, Jul 2005.
Iancu, F., Piechna, J.,
Müller, N. “Numerical Solutions for Ultra-Micro Wave Rotors (UµWR)”
35th AIAA Fluid Dynamics Conference, AIAA Paper 2005–5034,
Toronto, Jun 2005.
Siol, U., Staudacher St.,
Müller, N. “Preliminary wave rotor design by means of basic thermodynamic and fluid dynamic laws”
ASME Power Conference, ASME Paper PWR2005-50066, April 2005.
Akbari,
P., Nalim, M. R.,
Müller, N. “A Review of Wave Rotor Technology and its Applications”
2004 International Mechanical Engineering Conference, ASME Paper IMECE2004-60082, Nov 2004.
Piechna, J., Akbari, P., Iancu, F., Müller, N. “Radial-Flow Wave Rotor Concepts, Unconventional Designs and Applications”
2004 International Mechanical Engineering Conference, ASME Paper IMECE2004-59022, CA, Nov 2004.
Kharazi, A.,
Akbari, P., Müller, N. “Performance Benefits of R718 Turbo-Compression Cycles Using a 3-Port Condensing Wave Rotors”
2004 International Mechanical Engineering Conference, ASME Paper IMECE2004- 60992, Nov 2004.
Fraokowiak,
M., Iancu, F., Potrzebowski, A., Akbari, P., Müller, N., Piechna, J. “Numerical Simulation of Unsteady-Flow Processes in Wave Rotors”
2004 International Mechanical Engineering Conference, ASME Paper IMECE2004- 60973, Nov 2004.
Pauer, R., Müller,
N. “Impeller Design for Radial and Mixed Flow Compressors”
2004 International Mechanical Engineering Conference, ASME Paper IMECE2004- 61926, Nov 2004.
Kharazi,
A., Akbari, P., Müller, N. “An Application of Wave Rotor Technology for Performance Enhancement of R718 Refrigeration Cycles”
2nd International Energy Conversion Engineering Conference, AIAA Paper 2004-5636, Aug 2004.
Iancu,
F., Akbari, P., Müller, N. “Feasibility Study of Integrating Four-Port Wave Rotors into Ultra-Micro Gas Turbines”
40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA Paper 2004-3581, July 2004.
Kilicarslin, A., Müller,
N. "COPs of R718 in Comparission with Other Modern Refrigerants"
1st Cappadocia International Mechanical Engineering Symposium, Cappadocia, Turkey, July 2004.
Akbari,
P., Müller, N., Nalim, M. R.“Performance Improvement of Recuperated and Unrecuperated Microturbines Using Wave Rotor Machines”
2004 ASME-ICED Spring Technical Conference, CIMAC Paper 2004-218, Japan, Jun 2004.
Kharazi,
A., Akbari, P., Müller, N.
“Preliminary Study of a Novel R718 Turbo-Compression Cycle Using a
3-Port Condensing Wave Rotor”
2004 International ASME Turbo Exposition, ASME Paper GT2004-53622,
Austria, Jun 2004.
Akbari,
P., Müller, N.
“A Preliminary Design Procedure for Gas Turbine Topping Reverse-Flow Wave Rotors”
2003
International Gas Turbine Congress,
ASME Paper IGTC03-FR-301,
Japan, Nov 2003.
Akbari, P., Kharazi,
A.,
Müller, N.“Utilizing Wave Rotor Technology to Enhance the Turbo-Compression in Power and Refrigeration Cycles”
2003 International Mechanical Engineering Conference, ASME Paper IMECE2003-44222, Nov 2003.
Akbari, P.,
Müller, N.“Performance Investigation of Small Gas Turbine Engines Topped with Wave Rotors”
39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA Paper 2003-4414, Jul 2003.
Akbari, P., Müller, N. “Performance Improvement of Small Gas Turbines Through Use of Wave Rotor Topping Cycles”
2003 International ASM
Akbari, P., Müller, N. “Gas Dynamic Design Analyses of Charging Zone for Reverse-Flow Pressure Wave Superchargers”
2003 ASME Spring Technical Conference, ASME Paper ICES2003-690, Austria, May 2003.
Müller N. & Fréchette L. G. “Performance Analysis of Brayton and Rankine Cycle Microsystems for Portable Power Generation”
IMECE’02, ASME International Mechanical Engineering Congress & Exposition, New Orleans, Nov 17-22, 2002, .
Müller N.
“Turbo Chillers
Using Water as a Refrigerant”ASME Process Industry Division PID Newsletter, Fall 2002, p 3.
Müller N. & Fréchette L. G. “Optimization and Design Guidelines for High Flux Micro-Channel Heat Sinks for Liquid and Gaseous Single Phase Flow,”
ITHERM 2002, Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, San Diego CA, May 30 – June 1, 2002, pp 449-456.
Müller
N. (2001)“Ein schneller Algorithmus für Entwurf und Berechnung von Laufrädern mit Radialfaserschaufeln"
(A fast algorithm for design and flow calculation of radial-line impellers)
in Klingenberg J., Heller W.: Beiträge zur Strömungsmechanik, TU Dresden, p 235-244.
Müller
N. (2001)“Design of Compressor Impellers for Water as a Refrigerant”
ASHRAE Transaction Vol. 107, p 214-222.
Müller N. “Design of Compressor Impellers for Water as a Refrigerant”
ASHRAE Annual Meeting, Cincinnati, June 23-27, 2001.
Müller N. (2001)“A Quick Design Method for Radial line Blading”
ASME International Joint Power Generation Conference & Exposition, New Orleans, June 4-7, 2001.
Müller
N. (1999)“Entwurf von Laufrädern mit Radialfaserschaufeln für Diagonalverdichter mit getrennt angetriebenen Vorläufer und Hauptläufer (Design of mixed-flow compressors with separately driven pre- and main runner with radial-line blading)”
Dissertation, TU Dresden.
Albring
P. et al. (1998)“Grundlagenuntersuchungen energierationeller Kreisprozesse mit Wasser als Kältemittel und Erprobung einer Versuchs-Großanlage” (Fundamental investigations of energy efficient cycles with water as a refrigerant and test of a full-size test unit)
Abschlußbericht zum BMBF-Forschungsvorhaben 0326921A.
Müller
N. (1998)“Optimierung der Entwurfsparameter eines Systems Vorläufer-Hauptläufer für maximale Arbeitsübertragung im Diagonalverdichter” (Optimizing the design parameters of separately driven inducer and main wheel of a mixed-flow compressor for maximized work transmission).
Fluid Engineering Conference at Technische Universität Dresden, 9 October 1998.
Albring
P. et al. (1997)“Direktentspannungsverdampfer” (Direct expansion evaporator)
Deutsche Gebrauchsmusteranmeldung (German Patented Design Application) Reg.-Nr. 297 14 566.5.
Albring
P. et al. (1996)“Turboverdichter-Laufrad” (Turbo-compressor wheel)
Deutsche Patentanmeldung (German Patent Application) Reg.-Nr. 196 34 043.8.
Albring
P., Müller N.(1995)“Mehrfachlaufrad für Turboverdichter” (Multiple turbo-compressor rotor)
Deutsche Patentanmeldung (German Patent Application) Reg.-Nr. 195 43 181.2.
Albring
P., Müller N. (1995)“Turboverdichter für Wasser als Kältemittel” (Turbo-Compressors for Water as a Refrigerant)
in Faragallah, W., Surek, D.: Beiträge zu Fluidenergiemaschinen Band 2, pp 16-22, Sulzbach.
Albring
P. et al. (1994)“Kältemittel-Turboverdichter” (Refrigerant turbo-compressor)
European Patent Registration Reg.-No. 94108502.9.
Albring
P. et al. (1994)“Turbo-Compressor Impeller for Coolant”
United States Patent No. 5,464,325.
Albring
P. et al. (1993)“Radiallaufrad” (Radial-Flow Impeller)
Deutsche Patentschrift (German Patent) DE 43 21 173 C2.