2024
Ran Ni, Carl J. Boehlert, Ying Zeng, Bo Chen, Saijun Huang, Jiang Zheng, Hao Zhou, Qudong Wang, Dongdi Yin, “Automated analysis framework of strain partitioning and deformation mechanisms via HRDIC-EBSD fusion and computer vision: application to a Mg alloy”, International Journal of Plasticity, Vol. 182 (2024) 104119. https://doi.org/10.1016/j.ijplas.2024.104119
Isuri N. Dammulla, Ryan Weston, Uddin Madmud, Sujoy Saha, Sarah McFall-Boegeman, Luke Rice, Jonathan H. Dwyer, Taylor Kmetz, Carl J. Boehlert, and Greg M. Swain, “Material Characterization and Electrochemical Properties of Titanium Alloy 5553 Prepared by Selective Laser Melting As Processed and After Abrading and Polishing”, ACS Omega, Vol. 9 Issue 31 (2024) 34021- 34035. https://doi.org/10.1021/acsomega.3c08935
G. Kumari, M Sundararaman, C.J. Boehlert, Chanchal Ghosh, Mythili R, Arup Dasgupta, J.D. Poplawsky, and S. Sankaran, “Strengthening mechanisms for microstructures containing unimodal and bimodal γ' precipitates in ATI 718Plus”, Materials Science and Engineering A, 908 (2024) 146928. https://doi.org/10.1016/j.msea.2024.146928
L.B. Ren, Y. Zhao, J. Li, F. Liu, B. Liu, G. Wu, C.J. Boehlert, and Z. Shan, “Inhibiting creep in fine-grained Mg-Al alloys through grain boundary stabilization”, Journal of Magnesium and Alloys, (2024) https://doi.org/10.1016/j.jma.2024.04.033
A. Amroussia, C.J. Boehlert, F. Pellemoine, D.S. Grummon, W. Mittig, T. Bieler, M. Li, and W. Chen, “Microstructural evolution of ion-irradiated commercially pure titanium”, Journal of Nuclear Materials, 599 (2024) 155105. https://doi.org/10.1016/j.jnucmat.2024.155105
A. Tanji, H. Hermawan, and C.J. Boehlert, " The Corrosion Behavior of High-Pressure Torsion Processed Zn-Mg Alloys and Hybrids”, Materials, vol. 17 (1) (2024), 270. https://doi.org/10.3390/ma17010270
J. Ballor, J.D. Poplawsky, A. Devaraj, S. Misture, C.J. Boehlert, "Lattice Parameter Evolution during the β-to-α and β-to-ω Transformations of Iron- and Aluminum-Modified Ti-11Cr(at.%)", Crystals vol. 14(2) (2024) 145. https://doi.org/10.3390/cryst14020145
D. Hernández-Escobar, N. Pajares-Chamorro, X. Chatzistavrou, K. D. Hankenson, N. D. Hammer, and C. J. Boehlert, "Tailored Coatings for Enhanced Performance of Zinc–Magnesium Alloys in Absorbable Implants", ACS Biomaterials Science & Engineering, vol. 10 (1) (2024) 338-354. https://doi.org/10.1021/acsbiomaterials.3c01255
2023
G. Kumari, M Sundararaman, C. J. Boehlert, J. D. Poplawsky, K. A. Unocic, and S. Sankaran, "Influence of interrupted cooling on the development of bimodal γ' precipitate distributions in ATI 718Plus", Journal of Materials Science, vol. 58 (2023) 16445–16461. https://doi.org/10.1007/s10853-023-08988-1
B.B. Dasha, S. Dixita, C. J. Boehlert, M. Sundararamana, and S. Sankaran, “Influence of Interrupted Ageing on the Temporal Evolution of γʹ Distribution and the co-precipitation of γʺ in Alloy 718Plus”, Materials Characterization, vol. 206 (2023) 113394. https://doi.org/10.1016/j.matchar.2023.113394
T. Rahman, H. Yilmazer, B. Dikici, K. Edalati, J.D. Poplawsky, and C.J. Boehlert, “Microstructural evolution and intermetallic formation in Zn-3Mg (wt%) powder mixture processed by high-pressure torsion,” Journal of Alloys and Compounds, vol. 968 (2023) 172101. https://doi.org/10.1016/j.jallcom.2023.172101
J. Ballor, A. A. Shawon, A. Zevalkink, T. Sunaoshi, S. Misture, and C.J. Boehlert, “The effects of Fe and Al on the phase transformations and mechanical behavior of β-Ti alloy Ti-11at.%Cr,” Materials Science and Engineering A, vol. 886 (2023) 145677. https://doi.org/10.1016/j.msea.2023.145677
O. Yigit, T. Gurgenc, B. Dikici, M. Kaseem, C.J. Boehlert, and E. Arslan, “Surface modification of pure Mg for enhanced biocompatibility and controlled biodegradation: a study on graphene oxide (GO)/strontium apatite (SrAp) biocomposite coatings”, Coatings, vol. 13(5), pp. 890 (2023). https://doi.org/10.3390/coatings13050890
G. Kumari, T.Q. Pham, H. Suen, T. Rahman, P. Kwon, S.N. Foster, and C.J. Boehlert, “Improving the soft magnetic properties of binder jet printed iron-silicon alloy through boron addition” Materials Chemistry and Physics, Vol. 296 (2023) 127181. https://doi.org/10.1016/j.matchemphys.2022.127181
J. Ballor, T. Li, F. Prima, C.J. Boehlert, and A. Devaraj, “A Review of the Metastable Omega Phase in Beta Titanium Alloys: The Phase Transformation Mechanisms and Its Effect on Mechanical Properties”, International Materials Reviews, Vol. 68 Issue 1 (2023). https://doi.org/10.1080/09506608.2022.2036401.
2022
K.J. Islam, T.Q. Pham, H. Suen, T. Rahman, G. Kumari, P. Kwon, C.J. Boehlert, and S. N. Foster, "Eddy Current Loss Reduction in Binder Jet Printed Iron Silicon", ECCE 2022, paper number, EC-1181 Paper Topics: G10. Additive manufacturing and other advanced manufacturing technologies, Proceedings of the 2022 IEEE Energy Conversion Congress and Exposition (ECCE) 978-1-7281-9387-8/22, Detroit, Michigan. https://doi.org/10.1109/ECCE50734.2022.9947593
J. Le, Y. Han, M. Fang, S. Li, G. Huang, J. Mao, C.J. Boehlert, and W. Lu, “A universal shear-lag model for accurate assessment of whisker load-transfer strengthening in metal matrix composites, Journal of Composites Part B, Vol. 247 (2022) 110317. https://doi.org/10.1016/j.compositesb.2022.110317
J. Ballor, J. Poplawsky, E. Kautz, B. Gwalani, A. Devaraj, A. Zevalkink, S.T. Misture, M. Ikeda, and C.J. Boehlert, “APT compositional analysis of the microstructure of Ti-Cr-Fe-Al alloys”, Microscopy and Microanalysis 2022, Portland, Oregon, July 31- August 4, 2022.
J. Le, C.J. Boehlert, G. Huang, J. Mao, L. Lei, Y. Han, and W. Lu, “TiB whisker induced variant selection in titanium matrix composites”, Scripta Materialia, Volume 217 (2022), 114772. https://doi.org/10.1016/j.scriptamat.2022.114772
D. Hernández-Escobar, M. Kawasaki, and C.J. Boehlert, “Metal hybrids processed by high-pressure torsion: synthesis, microstructure, mechanical properties and developing trends”, International Materials Reviews, Vol. 67 Issue 3 (2022). https://doi.org/10.1080/09506608.2021.1922807
2021
V. Khademi, T.R. Bieler, and C.J. Boehlert, “On the correlation between plastic strain and misorientation in polycrystalline body-centered-cubic microstructures with an emphasis on the grain size, loading history, and crystallographic orientation”, International Journal of Plasticity, vol. 146 (2021) 103084. https://doi.org/10.1016/j.ijplas.2021.103084
T. Pham, H. Suen, P. Kwon, G. Kumari, C.J. Boehlert, and S. Foster, “Reduction in Hysteresis Loss of Binder Jet Printed Iron Silicon with Boron”, IEEE Transactions on Industrial Applications 2021, Vol. 57, Issue 5, pp. 4864-4873. https://doi.org/10.1109/TIA.2021.3099463
Y.Q. Chai, C.J. Boehlert, Y.F. Wan, G.H. Huang, H. Zhou, J. Zheng, Q.D. Wang, and D.D. Yin, “Anomalous tension twinning activity in extruded Mg sheet during hard-orientation loading at room temperature”, Metallurgical and Materials Transactions A, Vol. 52 (2021) 449-456. https://doi.org/10.1007/s11661-020-06093-5
C.J. Boehlert, D. Hernández-Escobar, B. Ruiz-Palenzuela, I. Sabirov, J. Cornide, and E.M. Ruiz Navas, “The effect of microstructure and strain rate on the 25ºC and 700ºC compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8v.%TiB2 alloy”, Materials Characterization, vol. 172 (2021) 110856. https://doi.org/10.1016/j.matchar.2020.110856
C.J. Boehlert, I. Sabirov, B. Ruiz-Palenzuela, J. Cornide, and E.M. Ruiz Navas, “A Comparison of Field Assisted Hot Pressing and Hot Isostatic Pressing for Gas Atomized Ti-22Al-26Nb(at.%) and Ti-22Al-26Nb-5B(at.%) Powders”, Journal of Alloys and Compounds, vol. 852 (2021) 156870. https://doi.org/10.1016/j.jallcom.2020.156870
L.B. Ren, C.J. Boehlert, and G.F. Quan, “The effect of small Y and Nd additions on the microstructure and creep behavior of AZ80”, Materials Science and Engineering A, Vol 801 (2021) 140397. https://doi.org/10.1016/j.msea.2020.140397
D.D. Yin, C.J. Boehlert, L.J. Long, G.H. Huang, H. Zhou, J. Zheng, and Q.D. Wang, “Reversed tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg-Y sheets”, International Journal of Plasticity, Vol. 136 (2021) 102878. https://doi.org/10.1016/j.ijplas.2020.102878
2020
D. Hernández-Escobar, R.R. Unocic, M. Kawasaki, and C.J. Boehlert, “High-Pressure Torsion Processing of Zn-3Mg Alloy and its Hybrid Counterpart: A Comparative Study”, Journal of Alloys and Compounds, Vol. 831 (2020) 154891. https://doi.org/10.1016/j.jallcom.2020.154891
Y. Cao, D. Hernández-Escobar, C.J. Boehlert, and N. Sepulveda, “Actuation Dependency of Frequency Tuning in MEMS Resonators”, IEEE Journal of Microelectromechanical Systems, Vol. 9, issue 2 (2020) 132-134. https://doi.org/10.1109/JMEMS.2020.2975077
L.B. Ren, M.Y. Zhou, C.J. Boehlert, Z. Shan, and G.F. Quan, “Multi-microalloying mediated grain growth and texture evolution during the high-temperature static recrystallization of AZ80 alloys”, Journal of Alloys and Compounds, (2020) 155077. DOI: 10.1016/j.jallcom.2020.155077
L.B. Ren, M.Y. Zhou, T. Lu, L. Fan, Y. Guo, Y. Zhang, C.J. Boehlert, and G.F. Quan, “Eutectic-phase strengthening and strain rate sensitivity behavior of AZ80 magnesium alloy”, Materials Science and Engineering A, Vol. 770 (2020) 138548. https://doi.org/10.1016/j.msea.2019.138548
G. Kumari, C.J. Boehlert, S Sankaran, M Sundararaman, “The Effects of Solutionizing Temperature on the Microstructure of Allvac 718plus”, Journal of Materials Engineering and Performance, Vol. 29 (2020) pp. 3523-3533. https://doi.org/10.1007/s11665-020-04687-z
D. Hernández-Escobar, J. Marcus, J-K Han, R.R. Unocic, M. Kawasaki, and C.J. Boehlert, “Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn-Mg hybrids processed by High-Pressure Torsion” Materials Science and Engineering A, vol. 771 (2020) 138578. https://doi.org/10.1016/j.msea.2019.138578
V. Khademi, H. Liu, M. Nakai, M. Niinomi, and C.J. Boehlert, “The Deformation Behavior of Oxygen-modified Ti-29Nb-13Ta-4.6Zr(wt.%)”, Proceedings of the 14th World Conference on Titanium (Ti-2019), MATEC Web of Conferences 321 (2020) 11003. https://doi.org/10.1051/matecconf/202032111003
2019
G. Kumari, C.J. Boehlert, S Sankaran, M Sundararaman, “The Effects of Solutionizing and Aging temperature on the Microstructure of Allvac 718plus”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, October 15–17, 2019, Detroit, Michigan, 96-105.
H. Chakravarty, C.J. Boehlert, “The Effects of Alloying Additions of Aluminum and Iron on the Creep Resistance of Ti-12Cr(wt.%) alloys”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, October 15–17, 2019, Detroit, Michigan, 355-364.
D. Hernández-Escobar, S. Champagne, H. Yilmazer, B. Dikici, H. Hermawan, and C.J Boehlert, “Current status and perspectives of zinc-based absorbable alloys for biomedical applications”, Acta Biomaterialia, Vol. 97 (2019) 1-22. https://doi.org/10.1016/j.actbio.2019.07.034
J. Ballor, E.J. Kautz, B. Gwalani, C.J. Boehlert, A. Devaraj, "Influence of Composition and Structure on Measured H Concentration in beta-Ti Alloys via Atom Probe Tomography," Micro. Microanal. 25 (Suppl 2) (2019). https://doi.org/10.1017/S1431927619013448
T. Pham, C. Mellak, H. Suen, Carl Boehlert, A. Muetze, P. Kwon, and S. Foster, “Binder Jet Printed Iron Silicon with Low Hysteresis Loss”, 2019 IEEE International Electronic Machines and Drives Conference (IEMDC), 2019, 1045-1052. (Dates of Conference: May 12-15, 2019, San Diego, CA) DOI:10.1109/IEMDC.2019.8785256
V. Khademi, M. Ikeda, D. Hernandez-Escobar, and C.J. Boehlert, “The Elevated-Temperature Strength Enhancement of a Low-Cost Beta Titanium Alloy Through Thermomechanically-Induced Phase Transformation”, Journal of Materials, Vol. 71 no. 10 (2019) 3621-3630. https://doi.org/10.1007/s11837-019-03598-2
U. Okeke H. Yilmazer, S. Sato, and C.J. Boehlert, “Strength Enhancement of an Aluminum Alloy Through High Pressure Torsion”, Materials Science and Engineering A, Vol. 760 (2019) 195-205. https://doi.org/10.1016/j.msea.2019.05.102
J. Ballor, M. Ikeda, E.J. Kautz, C.J. Boehlert, A. Devaraj, “Composition dependent microstructure-property relationships of Fe and Al modified Ti-12Cr(wt%)”, Journal of Materials, Vol. 71 no. 7 (2019) 2321-2330. https://doi.org/10.1007/s11837-019-03467-y
D. Hernandez-Escobar, Z.U. Raman, H. Yilmazer, M. Kawasaki, and C.J. Boehlert, “Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by High-Pressure Torsion”, Philosophical Magazine, Vol. 99, Issue 5 (2019) pp. 557-584. https://doi.org/10.1080/14786435.2018.1546962
L.B. Ren, M.Y. Zhou, Y.W.X. Zhang, C.J. Boehlert, and G. Quan, “Effect of 0.4wt.% yttrium addition and heat treatment on the high-temperature compression behavior of cast AZ80”, Journal of Materials Science, Vol. 54 Issue 5 (2019) pp. 5757-5772. https://doi.org/10.1007/s10853-018-3154-y
2018
U. Okeke and C.J. Boehlert, ”Microstructural Analysis and Creep Behavior of 25mm Thick Friction Stir Welded AA2139-T8”, Proceedings of the 2018 NDIA Ground Vehicle Systems Engineering and Technology Symposium (GVSETS), Series: Materials & Advanced Manufacturing, August 7-9, 2018, Novi, Michigan, pp.1-15.
L.B. Ren, L. Fan, M. Zhou, Y. Guo, Y. Zhang,, C.J. Boehlert, and G. Quan, “Magnesium Applications in Railway Rolling Stocks: a new challenge and opportunity for lightweighting”, International Journal of Lightweight Materials and Manufacture, Volume 1, Issue 2 (2018) 81-88. https://doi.org/10.1016/j.ijlmm.2018.05.002
L.B. Ren, G.F. Quan, C.J. Boehlert, M. Y. Zhou, Y.Y. Guo, and L.L. Fan, “The microstructure evolution and deformation behavior of AZ80 during gradient increment cyclic loading”, Metallurgical Transactions A, Vol. 49 Issue 8 (2018) (August) 3692-3702. https://doi.org/10.1007/s11661-018-4687-z
A. Chakkedath, T. Maiti, J. Bohlen, S. Yi, D. Letzig, P. Eisenlohr, and C.J. Boehlert, “Contraction twinning dominated tensile deformation and subsequent fracture in extruded Mg-1Mn (wt.%) at ambient temperature”, Metallurgical Transactions A, Vol. 49 Issue 6 (2018) (June) 2441-2454. https://doi.org/10.1007/s11661-018-4557-8
C. Zhang, S. Balachandran, P. Eisenlohr, M.A. Crimp, C. Boehlert, R. Xu, and T.R. Bieler, “Comparison of dislocation content measured with transmission electron microscopy and micro-Laue diffraction based streak analysis”, Scripta Materialia, Vol. 144 (2018) (February) pp. 74-77. https://doi.org/10.1016/j.scriptamat.2017.09.043
A. Chakkedath, D. Hernandez-Escobar, and C.J. Boehlert, “In-situ Observations of Recrystallization and Microstructural Evolution in Cerium-containing Rolled Magnesium Alloys”, International Journal of Lightweight Materials and Manufacture, Volume I Issue 4 (2018) 256-264. https://doi.org/10.1016/j.ijlmm.2018.09.004
2017
H. Liu, M. Niinomi, M. Nakai, X. Cong, K. Cho, C.J. Boehlert, and V. Khademi, “Abnormal deformation behavior of oxygen-added beta-type Ti-29Nb-13Ta-4.6Zr alloys for biomedical applications”, Metallurgical and Materials Transactions A, January (2017) Vol. 48A, pp 139-149. https://doi.org/10.1007/s11661-016-3836-5
2016
A. Chakkedath, C.J. Boehlert, D. Hernandez, J. Bohlen, S. Yi, and D. Letzig, “In-Situ EBSD Technique Characterizes Microstructure Evolution of Magnesium Alloy”, Advanced Materials and Processes, June (2016) Vol. 174 No. 6, pp. 19-21.
D.D. Yin, Q.D. Wang, C.J. Boehlert, Z. Chen, H. Li, R.K. Mishra, A. Chakkedath, and A.K. Sachdev, “In situ study of the tensile deformation and fracture modes in peak-aged cast Mg-11Y-5Gd-2Zn-0.5Zr(wt.%)”, Metallurgical Transactions A, vol 47A (2016) 6438-6452. https://doi.org/10.1007/s11661-016-3709-y
H. Wang, C.J. Boehlert, Q. Wang, D. Yin, and W. Ding, “In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures”, International Journal of Plasticity, Vol. 84 (2016) 255-276. https://doi.org/10.1016/j.ijplas.2016.06.001
H. Wang, Q.D. Wang, C.J. Boehlert, D.D. Yin, and W. Ding, “In-situ analysis of the slip activity during tension deformation of cast and extruded Mg-10Gd-3Y-0.5Zr (wt.%) at 250C”, Materials Characterization, Vol. 616 (2016) 8-17. https://doi.org/10.1016/j.matchar.2016.04.001
A. Chakkedath, D. Escobar-Hernandez, J. Bohlen, S. Yi, D. Letzig, and C.J. Boehlert, “In-situ EBSD observations of recrystallization and texture evolution in cold rolled Mg-2Zn-xCe (wt%)”, Magnesium Technology 2016, eds. Alok Singh, Kiran Solanki, Michele V. Manuel, and Neale R. Neelameggham, TMS (The Minerals Metals and Materials Society), 2016, pp. 237.
V. Khademi, C.J. Boehlert, and M. Ikeda, “The tensile deformation behavior of beta titanium alloys at elevated temperatures”, Proceedings of the Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV), editors: M. Ikeda, T. Haruna, M. Niinomi, and T.S. Srivatsan, Organized by Kansai University (Osaka, Japan), 2016, pp. I-X.
H. Wang, C.J. Boehlert, Q.D. Wang, D.D. Yin, and W.J. Ding, “Analysis of slip activity and deformation modes in tension and tension-creep tests of cast Mg-10Gd-3Y-0.5Zr (wt pct) at elevated temperatures using in-situ SEM experiments”, Metallurgical and Materials Transactions A, Vol. 47 issue 5 (2016) 2421-2443. https://doi.org/10.1007/s11661-016-3383-0
M. Avilov, A. Aaron, A. Amroussia, W. Bergez, C.J. Boehlert, T. Burgess, A. Carroll, C. Colin, F. Durantel, P. Ferrante, T. Fourmeau; V. Graves, C. Grygiel, W. Mittig, I. Monnet, F. Pellemoine, R. Ronningen, and M. Schein, “Thermal, Mechanical and Fluid Flow Aspects of the High Power Beam Dump for FRIB”, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms (NIMB), Vol. 376 (2016) 24-27 http://dx.doi.org/10.1016/j.nimb.2016.02.068
H. Li, C.J. Boehlert, T.R. Bieler, and M.A. Crimp, “The Distribution of the Deformation Systems in Tension in Alpha+Beta Titanium Alloys at Temperatures Ranging between 296K-728K”, Proceedings of the 13th World Conference on Titanium (Ti-2015), Edited by: Vasisht Venkatesh, Adam L. Pilchak, John E. Allison, Sreeramamurthy Ankem, Rodney Boyer, Julie Christodoulou, Hamish L. Fraser, M. Ashraf Imam, Yoji Kosaka, Henry J. Rack, Amit Chatterjee, and Andy Woodfield, TMS (The Minerals, Metals & Materials Society), 2016, p. 1103-1108. https://doi.org/10.1002/9781119296126.ch187
V. Khademi, M. Ikeda, and C.J. Boehlert, “The Effect of Temperature on the Tensile Deformation Behavior of Ti-13Cr-1Fe-3Al(wt.%)”, Proceedings of the 13th World Conference on Titanium (Ti-2015), Edited by: Vasisht Venkatesh, Adam L. Pilchak, John E. Allison, Sreeramamurthy Ankem, Rodney Boyer, Julie Christodoulou, Hamish L. Fraser, M. Ashraf Imam, Yoji Kosaka, Henry J. Rack, Amit Chatterjee, and Andy Woodfield, TMS (The Minerals, Metals & Materials Society), 2016, p. 1109-1116. https://doi.org/10.1002/9781119296126.ch188
2015
H. Wang, Q.D. Wang, C.J. Boehlert, J. Yang, D.D. Yin, J. Yuan, and W.J. Ding, “The impression creep behavior and microstructural evolution of cast and cast-then-extruded Mg-10Gd-3Y-0.5Zr(wt.%)”, Materials Science and Engineering A, Vol. 649 (2015) 313-324. https://doi.org/10.1016/j.msea.2015.10.001
A. Amroussia, M. Avilov, C.J. Boehlert, F. Durantel, C. Grygiel, W. Mittig, I. Monnet, and F. Pellemoine, “Swift heavy ion irradiation damage in Ti-6Al-4V and Ti-6Al-4V-1B: Study of the microstructure and mechanical properties”, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms (NIMB), 2015, Vol. 365, pp. 515-521. DOI:10.1016/j.nimb.2015.09.029
I.G. Dastidar, A.L. Pilchak, T.R. Bieler, V. Khademi, M.A. Crimp, and C.J. Boehlert, “The Tensile and Tensile-Creep Deformation Behavior of Ti-8Al-1Mo-1V(wt.%)”, Materials Science and Engineering A, Vol. 636 (2015) 289-300. https://doi.org/10.1016/j.msea.2015.03.059
A. Chakkedath, J. Bohlen, S. Yi, D. Letzig, Z. Chen, and C.J. Boehlert, “The Deformation Behavior, Microstructure, and Mechanical properties of Cast and Extruded Mg-1Mn-xNd(wt%) at temperatures between 50°C and 250°C”, Magnesium Technology 2015, Eds. Michele V. Manuel, Alok Singh, Martyn Alderman, and Neale Neelameggham, TMS (The Minerals Metals and Materials Society), 2015 pp. 109-114.
A. Chakkedath and C.J. Boehlert, “In-Situ Scanning Electron Microscopy Observations of Contraction Twinning and Double Twinning in Extruded Mg-1Mn (wt.%)”, Journal of Materials, Vol. 67, No. 8, August (2015) pp.1748-1760. https://doi.org/10.1007/s11837-015-1478-5
H. Li, C.J. Boehlert, T.R. Bieler, and M.A. Crimp, “Examination of the distribution of the tensile deformation systems in tension and tension-creep of Ti-6Al-4V (wt.%) at 296 K and 728 K”, Philosophical Magazine, Vol. 95 no. 7 (2015) 691-729. http://dx.doi.org/10.1080/14786435.2014.1001459
C. Zhang, H. Li, P. Eisenlohr, W. Liu, C.J. Boehlert, M.A. Crimp, T.R. Bieler, “Effect of Realistic 3D Microstructure in Crystal Plasticity Finite Element Analysis of Polycrystalline Ti-5Al-2.5Sn”, International Journal of Plasticity, Vol. 69 (2015) 21-35. http://dx.doi.org/10.1016/j.ijplas.2015.01.003
H. Wang, Q.D. Wang, C.J. Boehlert, D.D. Yin, and J. Yuan, “Tensile and compressive creep behavior of extruded Mg-10Gd-3Y-0.5Zr (wt.%) Alloy”, Materials Characterization, Vol. 99 (2015) 25-37. https://doi.org/10.1016/j.matchar.2014.11.006
2014
R. Muñoz-Moreno, E.M. Ruiz-Navas, C.J. Boehlert, J. Llorca, J.M. Torralba, and M.T. Perez-Prado, "Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn-0.8vol%TiB2 alloy by high temperature in-situ mechanical testing.", Materials Science and Engineering A, Vol. 606 (2014) 276-289.
A. Chakkedath, J. Bohlen, S. Yi, D. Letzig, Z. Chen, and C.J. Boehlert, “The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn(wt%) at temperatures between 298K and 523K (25 and 250°C)”, Metallurgical Transactions A., Vol. 45 issue 8 (2014) 3254-3274. https://doi.org/10.1007/s11661-013-2143-7.
T. Sano, U. Okeke, J. Yu, C. Boehlert, and C-F Yen, “Analysis of the Microstructure and Properties of Friction Stir Weld Zones in the Al 2139-T8 Alloys”, Symposium on Deformation, Damage, and Fracture of Light Metals and Alloys III, TMS2014 Annual Meeting Supplemental Proceedings, TMS the Minerals Metals and Materials Society, 2014 pp. 547-554.
H. Li, C.J. Boehlert, T.R. Bieler, and M.A. Crimp, “Analysis of the Deformation Behavior in Tension and Tension-Creep of Ti-3Al-2.5V(wt.%) at 298K and 728K Using In-Situ SEM Experiments”, Metallurgical Transactions A, Vol. 45A (2014) 6053-6066. https://doi.org/10.1007/s11661-014-2576-7
2013
Z. Chen and C.J. Boehlert, “Evaluating the Plastic Anisotropy of AZ31 using Microscopy Techniques”, Journal of Materials, Vol. 65 No. 9 September (2013) 1237-1244. https://doi.org/10.1007/s11837-013-0672-6
N.V. Dudamell, P. Hidalgo-Manrique, A. Chakkedath, Z. Chen, C.J. Boehlert, F. Galvez, S. Yi, J. Bohlen, D. Letzig, and M.T. Pérez-Prado, “Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium”, Materials Science and Engineering, 583 (2013) 220-231. http://dx.doi.org/10.1016/j.msea.2013.07.003
H. Li, D.E. Mason, T.R. Bieler, C.J. Boehlert, and M.A. Crimp, “Methodology for Estimating the Critical Resolved Shear Stress Ratios of α-Phase Ti Using EBSD Based Trace Analysis”, Acta Materialia, Vol. 61 (2013) 7555-7567. http://dx.doi.org/10.1016/j.actamat.2013.08.042
C.J. Boehlert, Z. Chen, I. Gutiérrez-Urrutia, J. Llorca, and M.T. Pérez Prado,“On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31”, Materials Science Forum, Vol 735 (2013) 22-25. https://doi.org/10.4028/www.scientific.net/MSF.735.22
Z. Chen, A. Shyam, J. Huang, R.F. Decker, S.E. LeBeau, and C.J. Boehlert, “The Small Fatigue Crack Growth Behavior of an AM60 Magnesium Alloy”, Metallurgical Transactions, Vol. 44 issue 2 (2013) 1045-1058 https://doi.org/10.1007/s11661-012-1449-1
C.J. Boehlert, Z. Chen, A. Chakkedath, I. Gutiérrez-Urrutia, J. Llorca, J. Bohlen, S. Yi, D. Letzig, and M.T. Pérez Prado,“In-situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd(wt.%)”, Philosophical Magazine, Vol. 93 issue 6 (2013) 598-617 https://doi.org/10.1080/14786435.2012.725954
H. Li, D.E. Mason, Y. Yang, T.R. Bieler, M.A. Crimp, and C.J. Boehlert, “Comparison of the Deformation Behavior of Commercially Pure Titanium and Ti-5Al-2.5Sn(wt.%) at 296K and 728K”, Philosophical Magazine, Vol. 93 No. 21 (2013) 2875-2895 http://dx.doi.org/10.1080/14786435.2013.791752
R. Muñoz-Moreno, M. T. Pérez-Prado, E.M. Ruiz-Navas, C. J. Boehlert, J. Llorca, "In situ SEM Observations of the Tensile-Creep Deformation Behavior and Fracture Mechanisms of a g-TiAl Intermetallic Alloy at Low and High Stresses", Materials Research Society Symposium Proceedings of the Fall 2012 Symposium JJ on Intermetallic-Based Alloys-Science Technology and Applications, eds., Materials Research Society, Pittsburgh, PA (2013) vol. 1516, pp. 65-70. Published online by Cambridge University Press, http://dx.doi.org/10.1557/opl.2012.1583
R. Muñoz-Moreno, M.T. Pérez-Prado, J. Llorca, E.M. Ruiz-Navas, and C.J. Boehlert, “Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8vol%TiB2: an In-Situ Experimental Study”, Metallurgical Transaction, Vol. 44A No. 4 (2013) 1887-1896. https://doi.org/10.1007/s11661-012-1515-8
2012
J.R. Seal, M.A. Crimp, T.R. Bieler, and C.J. Boehlert, “Analysis of Slip Transfer and Deformation Behavior Across the α/β Interface in Ti-5Al-2.5Sn (wt.%) with an equiaxed microstructure”, Materials Science and Engineering A, Vol. 552 (2012) 61-68. http://dx.doi.org/10.1016/j.msea.2012.04.114
C.J. Boehlert, Z. Chen, I. Gutierrez, J. Llorca, J. Bohlen, S. Yi, D. Letzig, , and M.T. Perez-Prado, “Analisis in-situ de los mecanismos de deformación en aleaciones de Magnesio” or “In-situ analysis of the deformation mechanisms in Mg”, extended abstract of the XII Congreso Nacional de Materiales (12th Spanish National Conference on Materials), Alicante, Spain, 2012. P. xx-xx.
D.D. Yin, Q. Wang, and C.J. Boehlert, “Creep and Fracture Behavior of As-Cast Mg-11Y-5Gd-2Zn-0.5Zr(wt.%)", Journal of Materials Science, Vol. 47 (2012) 6263-6275 https://doi.org/10.1007/s10853-012-6546-4
Z. Chen, C.J. Boehlert, I. Gutiérrez-Urrutia, J. Llorca, and M.T. Pérez-Prado, “Tensile and Creep Deformation Mechanisms in Rolled AZ31”, Magnesium Technology 2012, Eds. Suveen N. Mathaudhu, Wim H. Sillekens, Neale R. Neelameggham, and Norbert Hort, TMS (The Minerals Metals and Materials Society), (2012) 99-104.
H. Li, C.J. Boehlert, T.R. Bieler, and M.A. Crimp, “Analysis of Slip Activity and Heterogeneous Deformation in Tension and Tension-Creep of Ti-5Al-2.5Sn(wt.%) Using In-Situ SEM Experiments”, Philosophical Magazine, Vol. 92 No. 23 (2012) 2923-2946.
C.J. Boehlert, Z. Chen, I. Gutiérrez-Urrutia, J. Llorca, and M.T. Pérez-Prado, “In-situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ31”, Acta Materialia, Vol. 60 (2012) 1889-1904. https://doi.org/10.1016/j.actamat.2011.10.025
R. Muñoz-Moreno, C.J. Boehlert, M.T. Pérez-Prado, E.M. Ruiz-Navas, and J. Llorca, “In situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8vol%TiB2 XD”, Metallurgical Transaction, Vol. 43A (2012) 1198-1208. https://doi.org/10.1007/s11661-011-1022-3
D.D. Yin, Q. Wang, C.J. Boehlert, and V. Janik, “Creep and Fracture Behavior of Peak-Aged Mg-11Y-5Gd-2Zn-0.5Zr(wt.%)", Metallurgical Transactions, Volume 43 No. 9 (2012) 3338-3350 https://doi.org/10.1007/s11661-012-1131-7
D.D. Yin, Q. Wang, C.J. Boehlert, V. Janik, Y. Gao, and W.J. Ding, “Creep Behavior of Mg-11Y-5Gd-2Zn-0.5Zr(wt.%) at 573K”, Materials Science and Engineering A, Vol. 546 (2012) 239-247. http://dx.doi.org/10.1016/j.msea.2012.03.060
H. Li, C.J. Boehlert, T.R. Bieler, and M.A. Crimp, “Analysis of the tension and creep behavior of Ti-5Al-2.5Sn(wt.%) using in-situ SEM Experiments”, Proceedings of the 12th World Conference on Titanium (Ti-2011), Beijing, China. vol. 2 (2012) 937-941.
2011
W. Chen and C.J. Boehlert, “Texture induced anisotropy in extruded Ti-6Al-4V-xB alloys”, Materials Characterization, Vol. 62 Issue 3 (March) (2011) 333-339. https://doi.org/10.1016/j.matchar.2011.01.008
Z. Chen, J. Huang, R. Decker, S. LeBeau, and C.J. Boehlert, “The effect of thermomechanical processing on the creep behavior and fracture toughness of thixomolded® AM60 alloy”, Magnesium Technology 2011, Eds. S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, TMS John Wiley & Sons, Inc., Hoboken, NJ, USA (2011) 85-89. https://doi.org/10.1002/9781118062029.ch18
V. Janik, D.D. Yin, Q.D. Wang, S.M. He, C.J. Chen, Z. Chen, and C.J. Boehlert, "The Elevated-Temperature Mechanical Behavior of peak-aged Mg-10Gd-3Y-0.4Zr Alloy", Materials Science and Engineering A, Vol. 528 (2011) 3105-3112. https://doi.org/.1016/j.msea.2010.12.089
C.J. Boehlert and S.C. Longanbach, "A Comparison of the Microstructure and Creep Behavior of Cold Rolled HAYNES® 230 Alloy and Haynes® 282 Alloy", Materials Science and Engineering A, Vol. 528 (2011) 4888-4898.
Z. Chen, J. Huang, R.F. Decker, S.E. LeBeau, L.R Walker, O.B. Cavin, T.R. Watkins, and C.J. Boehlert, “The Effect of Thermomechanical Processing on the Tensile, Fatigue, and Creep Behavior of Thixomolded® AM60”, Metallurgical Transactions, Vol 42A Issue 5 (2011) 1386-1399.
W. Chen, C.J. Boehlert, J.Y. Howe, and E.A. Payzant, “The elevated-temperature mechanical behavior of as-cast and wrought Ti-6Al-4V-1B(wt.%)”, Metallurgical Transactions, Vol 42 Issue 10 (2011) 3046-3061.
C.J. Boehlert and S.C. Longanbach, “The Microstructure and Creep Behavior of Cold Rolled Udimet Alloy 188 Sheet”, Microscopy and Microanalysis, Vol. 17 (2011) 350-361. https://doi.org/10.1017/S1431927610094225
2010
M.A. Schlaud, R.J. Friederichs, M.J. Baumann, and C.J. Boehlert, “Osteoblast attachment and growth on novel TiNbAl alloys”, Red Cedar Undergraduate Research Journal (ReCUR), a bi-annual publication of the Michigan State University Honors College. August (2010), pp. 33-37.
C.J. Boehlert, H. Li, L. Wang, and B. Bartha, “Slip System Characterization of INCONEL alloy 718 using In-Situ Scanning Electron Microscopy”, Advanced Materials and Processes, November-December (2010) pp. 41-45.
W. Chen and C.J. Boehlert, “Characterization of the microstructure, tensile and creep behavior of powder metallurgy processed and rolled Ti-6Al-4V-1B Alloy”, Key Engineering Materials, Vol. 436 (2010) 195-203. https://doi.org/10.4028/www.scientific.net/KEM.436.195
Z. Chen, B. Kuhr, A. Ritter, J. Huang, R. Decker, S. LeBeau, and C.J. Boehlert, “The Effect of Thermomechanical Processing on the Tensile and Fatigue Behavior of Thixomolded® AM60”, Magnesium Technology 2010, Eds. S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, TMS (The Minerals, Metals, and Materials Society) Warrendale, PA, (2010) 495-500.
C. Hinüber, C. Kleemann, R. Friederichs, L. Haubold, H. Scheibe, T. Schuelke, C.J. Boehlert, and M.J. Baumann, “Biocompatibility and mechanical properties of diamond-like coatings on cobalt-chromium-molybdenum steel and titanium-aluminum-vanadium biomedical alloys”, Journal of Biomedical Materials Research: Part A, Vol. 95A Issue 2 (2010) 388-400. https://doi.org/10.1002/jbm.a.32851
J. LeBoeuf and C.J. Boehlert, “Evaluation of the Fibre-Matrix Debond Strength of a Ti-22Al-23Nb(at.%)/Trimarc Metal Matrix Composite”, Advanced Composites Letters, Vol. 19 Issue 1 (2010) 5-9.
W. Chen and C.J. Boehlert, “The 455°C tensile and fatigue behavior of boron-modified Ti-6Al-2Sn-4Zr-2Mo-0.1Si(wt.%)”, International Journal of Fatigue, Vol. 32 Issue 5 (2010) 799-807.
W. Chen, C.J. Boehlert, E.A. Payzant, and J.Y. Howe, “The effect of processing on the 455°C tensile and fatigue behavior of boron-modified Ti-6Al-4V”, International Journal of Fatigue, Vol. 32 Issue 3 (2010) 627-638.
J.P. Quast and C.J. Boehlert, “The Out of Phase Thermomechanical Fatigue Behavior of Ultra SCS-6/Ti-24Al-17Nb-xMo(at.%)/ Metal Matrix Composites”, International Journal of Fatigue, Vol. 32 Issue 3 (2010) 610-620.
2009
S.C. Longanbach and C.J. Boehlert, “In-Situ Tensile-Creep Observations of a Cobalt-Based Superalloy”, Microscopy and Microanalysis 2009, Vol 15 Suppl. 2 (2009) pp. 684-685 (Cambridge University Press). https://doi.org/10.1017/S1431927609092216
C.J. Boehlert and W. Chen, “The Elevated-Temperature Creep Behavior of Boron-Modified Ti-6Al-4V(wt.%)”, Materials Transactions, Vol. 50 No. 7 (2009) 1690-1703. (invited: Special Issue on New Functions and Properties of Materials Created by Designing and Processing).
M. Yamamoto, J. Shingledecker, C.J. Boehlert, T. Ogata, and M. Santella, “Microscopic evaluation of creep-fatigue interaction in a nickel-based superalloy”, Proceedings of 2nd ECCC Creep Conference, April 21-23 (2009), Zurich, Switzerland, Edited by I. A. Shibli and S. R. Holdsworth, pp. 1205-1215.
W. Chen and C.J. Boehlert, “The Effect of Boron on the Elevated-Temperature Tensile and Creep Behavior of Cast Ti-6Al-2Sn-4Zr-2Mo-0.1Si(wt.%)”, Metallurgical Transactions, 40A (2009) 1568-1578.
C.J. Boehlert, S. Tamirisakandala, W.C. Curtin, and D.B. Miracle, “Assessment of In Situ TiB Whisker Tensile Strength and Optimization of TiB Reinforced Titanium Alloy Design”, Scripta Materialia, 61 (2009) 245-248.
C.J. Boehlert, “The Creep Behavior of Powder-Metallurgy Processed Ti-6Al-4V-1B(wt.%)”, Materials Science and Engineering A, Vol. 510-511 (2009) 434-439.
2008
W. Chen and C.J. Boehlert, “The 455°C Fatigue Behavior of Boron-Modified Ti-6Al-4V”, proceedings of the Sixth International Conference on Low Cycle Fatigue, Berlin, Germany (September 8-12, 2008), Eds P.D. Portella, T. Beck, and M. Okazaki (2008) pp. 591-596.
W. Chen and C.J. Boehlert, “The Elevated-Temperature Fatigue Behavior of Boron-Modified Ti-6Al-4V(wt.%) Castings”, Materials Science and Engineering A, 494 issues 1-2 (2008) 132-138.
S.C. Longanbach and C.J. Boehlert, “The Effect of Thermomechanical Processing on the Microstructure and Creep Behavior of Udimet Alloy 188”, Proceedings of Superalloys 2008 (11th International Symposium on Superalloys), (TMS, Warrendale, PA) eds. Roger C. Reed, Kenneth A. Green, Pierre Caron, Timothy Gabb, Michael G. Fahrmann, Eric S. Huron, and Shiela A. Woodard (2008) pp. 461-468.
J.P. Quast, C.J. Boehlert, R.M Gardner III, E. Tuegel, and T. Wyen, “A Microstructure and Sonic Fatigue Investigation of Ti-TiB Functionally Graded Materials”, Materials Science and Engineering A, 497 issues 1-2 (2008) 1-9.
J.P. Quast and C.J. Boehlert, “The Effect of Molybdenum on the Microstructure and Creep Behavior of Ti-24Al-17Nb-xMo Alloys and Ti-24Al-17Nb-xMo/SiC-Fiber Composites”, Journal of Materials Science, 43 (2008) 4411-4422. https://doi.org/10.1007/s10853-008-2582-5
C.J. Boehlert, S.C. Longanbach, and T.R. Bieler, “The effect of thermomechanical processing on the creep behavior of Udimet Alloy 188”, Philosophical Magazine, Vol. 88 Issue 5 (2008) 641-664. https://doi.org/10.1080/14786430801944836
C.J. Boehlert, S.C. Longanbach, M. Nowell, and S. Wright, “The evolution of grain-boundary cracking evaluated through in-situ tensile creep testing of Udimet alloy 188”, Journal of Materials Research, Vol. 23 No. 2 (2008) 500-506.
C.J. Boehlert, “The Effect of Thermomechanical Processing on the Creep Behavior of Alloy 690”, Materials Science and Engineering A, Vol. 473 (2008) 233-237.
C.J. Cowen and C.J. Boehlert, “Microstructure, Tensile, and Creep Behavior of Boron-Modified Ti-15Al-33Nb(at.%)”, Metallurgical Transactions, Vol. 39A No. 2 (2008) 279-293.
C.J. Boehlert, C.J. Cowen, and J.P. Quast, M. Niinomi, and T. Akahori, “Fatigue and Wear evaluation of Ti-Al-Nb alloys for biomedical applications”, Materials Science and Engineering C: Biomimetic and Supramolecular Systems, Vol. 28 (2008) 323-330.
1995-2007
C.J. Cowen and C.J. Boehlert, “The Microstructure, Creep, and Tensile Behavior for a Ti-5Al-45Nb(at%) Fully-b Alloy”, Metallurgical Transactions, Vol. 38A No. 11 (2007) 2747-2753.
C.J. Boehlert, “Electron Backscattered Diffraction Observations of Grain Boundary Cracking for a Udimet 188 Alloy during In-Situ Creep Deformation”, Proceedings Microscopy and Microanalysis 2007, eds. M. Marko, J.H. Scott, E. Vicenzi, S. Dekanich, J. Frafjord, P. Kotula, S. McKernan, and J. Shields, (Cambridge University Press, Cambridge, UK) Vol. 13, Supplement 2, p. 916CD.
C.J. Boehlert, S. Tamirisakandala, and D. B. Miracle, “The Effect of Boron on the Elevated-Temperature Creep Behavior of Cast Ti-6Al-4V(wt.%)”, Ti 2007 Science and Technology, eds. M. Niinomi, S. Akiyama, M. Hagiwara, M. Ikeda, and K. Maruyama, Vol. 1 (2007) 697-700; Proceedings of the 11th World Conference on Titanium, 2007.
C.J. Boehlert, M. Niinomi, and T. Akahori, “Fatigue and Wear Evaluation of Ti-Al-Nb Alloys for Biomedical Applications”, 6th International Symposium on titanium in Dentistry Conference, June 5-6, 2007, Kyoto, Japan.
J.P. Quast and C.J. Boehlert, “The Effect of Molybdenum on the Microstructure, Tensile, and Creep Behavior of Ti-24Al-17Nb-xMo(at.%) Alloys”, Proceedings of the Microscopy and Microanalysis 2006 conference.
C.J. Boehlert and D. Palit, “The Effect of Cold Rolling on the Creep Behavior of Udimet 188”, Proceedings of the Microscopy and Microanalysis 2006 conference.
C.J. Cowen and C.J. Boehlert, “In-Situ SEM Observations of Grain Boundary Cracking during Creep for a Ti-15Al-33Nb(at.%) Alloy”, Advanced Intermetallic-Based Alloys, Eds. C.L. Fu, H. Clemens, J. Wiezorek, M. Takeyama, D. Morris, MRS Fall 2006 proceedings, Materials Research Society (2007) Vol. 980, Paper #: 0980-II05-05.
J.P. Quast and C.J. Boehlert, “The Effect of Molybdenum on the Microstructure and Creep Behavior of Tape Cast Ti-24Al-17Nb Alloys and their Composites”, Processing-Structure-Mechanical Property Relations in Composite Materials Symposium, Eds. L. Thilly, N.R. Moody, A. Mishra, P.A. Anderson, and M. Kumar, MRS Fall 2006 e-proceedings, Materials Research Society (2007).
C.J. Boehlert, “The Effect of Boron on the Elevated-Temperature Creep Behavior of Ti-6Al-4V(wt.%)”, Proceedings of the 2006 AFOSR Metals Review Meeting (Published by the AFOSR in CD-ROM)
S.C. Longanbach, K. Knittel, A. Lee, and C.J. Boehlert, “Processing -Microstructure-Property Relationships of Magnesium Alloys Containing Zr and/or B”, Proceedings of Magnesium Technology 2007 Symposium at the TMS Annual Meeting, Edited by R.S. Beals, A.A. Luo, N.R. Neelameggham, M.O. Pekguleryuz (The Minerals, Metals & Materials Society), Warrendale, PA, 2007, p. 313-316.
C.J. Boehlert, “A Scanning Electron Microscopy Outreach Program”, Proceedings of Outreach Programs in Materials Science and Engineering Symposium at the TMS Annual Meeting, editors: D. Thoma and K. Chen (The Minerals, Metals & Materials Society), Warrendale, PA, 2007, p. 1-10.
J.P. Quast and C.J. Boehlert, “Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-24Al-17Nb-0.66Mo (at%) and Ti-24Al-17Nb-2.3Mo (at.%) Alloys”, Metallurgical Transactions, Vol. 38A, No. 3 (2007) 529-536.
C.J. Cowen and C.J. Boehlert, “Comparison of the Microstructure, Tensile, and Creep Behavior for Ti-22Al-26Nb (at%) and Ti-22Al-26Nb-5B (at.%)”, Metallurgical Transactions, Vol. 38A, No. 1 (2007) 26-34.
C.J. Boehlert, “The effect of cold rolling on the creep behavior of Udimet alloy 188”, World Scientific and Engineering Academy and Society (WSEAS) Transactions on Heat and Mass Transfer, Vol. 1, Issue 2, February 2006, pp. 156-162 ISSN:1790-5044.
C.J. Boehlert, C.J. Cowen, and J.P. Quast, “Fatigue and wear evaluation of Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%) alloys for biomedical applications”, Proceedings of the 2006 ASME International Conference on Manufacturing Science and Engineering (MSEC), Ypsilanti, MI (paper# 21038).
C.J. Cowen and C.J. Boehlert, “The Microstructure and Creep Behavior of a Boron-Modified Ti-15Al-33Nb(at.%) Alloy”, Advanced Materials Research, Trans Tech Publications Ltd, Switzerland, Part 1 vol. 15-17 (2007) 976-981.
C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, and D.B. Miracle, “In Situ Scanning Electron Microscopy Observations of Tensile Deformation in a Boron-Modified Ti-6Al-4V Alloy”, Scripta Materialia, 55 (2006) 465-468.
C.J. Cowen and C.J. Boehlert, “Microstructure, Tensile, and Creep Behavior of Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%) Orthorhombic+BCC Alloys”, Proceedings of Titanium Alloys for High Temperature Applications-A Symposium Dedicated to the Memory of Dr. Martin Blackburn, edited by M.W. Peretti, D. Eylon, U. Habel, and G.C. Keitzers, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2006, pp. 93-103.
C.J. Boehlert and K. Knittel, “The Microstructure, Tensile Properties, and Creep Behavior of Mg-Zn Alloys Containing 0-4.4wt.%Zn”, Materials Science and Engineering A, 417 (2006) 315-321.
C.J. Boehlert, “The Microstructure, Tensile, and Creep Behavior of Mg-Zn Alloys Ranging from 0-4.4wt.%Zn”, Magnesium Technology, 2006, edited by A.A. Luo, N.R. Neelameggham, and R.S Beals, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2006, pp. 421-426.
C.J. Boehlert, “The Tensile and Creep Behavior of Mg-Zn Alloys with and without Y and Zr as Ternary Elements”, Journal of Materials Science, Vol. 42 No. 10 (2007) 3675-3684.
C.J. Boehlert, “The Grain Boundary Character Distribution of the Orthorhombic Phase in Intermetallic Ti2AlNb Alloys”, A Collection of OIM ApplicationsTM, catalog compiled by EDAX-TSL, Inc. (2005) 87-91.
C.J. Boehlert, D.S. Dickmann, and N.C. Eisinger, “The Effect of Cold Rolling on the Creep Behavior of INCONELâ alloy 718.”, Proceedings of the Sixth International Special Emphasis Symposium on Superalloys 718, 625, 706 and Derivatives, ed. E.A. Loria, (The Materials Society, Warrendale, PA) 2005, pp. 311-320.
C.J. Cowen and C.J. Boehlert, “Microstructure, Creep, and Tensile Behavior of a Ti-21Al-29Nb(at.%) Orthorhombic+B2 Alloy”, Intermetallics, Volume 14, Issue 4, (2006) pp. 412-422.
C.J. Boehlert, K.A. Rider, and L.M. Flick, “Biocompatibility Evaluation of Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%)”, Materials Transactions, Vol. 45, No. 7 (2005) 1-9. (invited: Special Issue on Medical, Healthcare, Sports and Leisure Materials).
C.J. Cowen and C.J. Boehlert, “Microstructure, Creep, and Tensile Behavior of a Ti-15Al-33Nb(at.%) Beta+Orthorhombic Alloy”, Philosophical Magazine, vol. 86 issue 1 (2006) 99-124.
C.J. Boehlert, “Materials Engineering Education through Service Learning Involving Scanning Electron Microscopy Education”, proceedings of the 2005 ASEE North Central Conference held at Ohio Northern University, Ada, Ohio, April 7-8, 2005, EV-3 service learning section of conference (ASEE, Chantilly, Virginia).
C.J. Cowen, Dingqiang Li, and C.J. Boehlert, “Microstructure-Property Relationships of Two Ti2AlNb-based Intermetallic Alloys: Ti-15Al-33Nb(at.%) and Ti-22Al-28Nb(at%)”, Integrative and Interdisciplinary Aspects of Intermetallics, Eds. M.J. Mills, H. Clemens, C-L. Fu, H. Inui, MRS Fall 2004 proceedings, Materials Research Society (2005) Vol. 842, pp. S7.9.1-S7.9.6.
G.L. Wynick and C.J. Boehlert, “Electron Backscattered Diffraction Characterization Technique for Analysis of a Ti-Al-Nb Orthorhombic Alloy”, Journal of Microscopy, Vol 219 Pt3 September (2005) 115-121.
Dingqiang Li and C.J. Boehlert, “Processing Effects on the Grain Boundary Character Distribution of the Orthorhombic Phase in Ti-Al-Nb Alloys”, Metallurgical and Materials Transactions, 36A (2005) 2569-2584.
G.L. Wynick and C.J. Boehlert, “Use of Electropolishing for Enhanced Metallic Specimen Preparation for Electron Backscattered Diffraction Analysis”, Materials Characterization Journal, Vol. 55, Issue 3 (2005) 190-202.
C.J. Boehlert, C.J. Cowen, C.R. Jaeger, M. Niinomi, and T. Akahori, “Tensile and fatigue evaluation of Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%) alloys for biomedical applications”, Materials Science and Engineering C: Biomimetic and Supramolecular Systems, 2005, Vol. 25, pp. 263-275.
Dingqiang Li, S.T. Wright, and C.J. Boehlert, “The Grain Boundary Character Distribution in a Fully-Orthorhombic Ti-25Al-24Nb(at.%) Alloy”, Scripta Materialia, Vol. 51/6 (2004) 545-50.
Dingqiang Li and C.J. Boehlert, “The Grain Boundary Character Distribution of the Orthorhombic Phase in Ti2AlNb Intermetallic Alloys”, TMS Letters, 2004, Vol. 1, Issue 7, pp. 159-160.
C.J. Boehlert, “Understanding Elevated-Temperature Grain Boundary Deformation Processes of High-Temperature Structural Alloys through Grain Boundary Engineering”, abstract proceedings of the National Science Foundation (NSF) CAREER Awardee Workshop for Mentoring and Networking, held in Arlington, Va. January 21-23, 2004.
D.S. Dickmann, N.C. Eisinger, and C.J. Boehlert, “The Effect of Cold Rolling Deformation on the Creep Backstress of INCONELâ alloy 718”, TMS Letters, 2004, Vol. 1, Issue 5, pp. 99-100.
R.J. Hanrahan, C.J. Boehlert and S. McDeavett, “Plutonium: A Reactive Nuclear Metal”, Journal of Metals, September 2003, p.12.
C.J. Boehlert S. Civelekoglu, R. Gundakaram, and J.F. Bingert, “The Grain Boundary Character Distribution in BCC and O+BCC Ti-Al-Nb Alloy Microstructures”, Ti-2003 Science and Technology, Gerd Luetjering and Joachim Albrecht, eds., Wiley-VCH Verlag GmbH & CoKGaA, Weinheim, Germany, Vol. IV (2004) 2145-52.
C.J. Boehlert, S. Civelekoglu, N.C. Eisinger, G.D. Smith, and J.R. Crum, “The Effect of Cold Rolling on the Grain Boundary Character and Creep Rupture Properties of INCONEL alloy 718”, Materials Forum, T. Chandra, J.M. Torralba, and T. Sakai (eds.), Trans Tech Publications Ltd, Enfield, NH, USA, Part 1 vol. 426-432 (2003) 761-766.
C.J. Boehlert, D.S. Dickmann, and N.C. Eisinger, “The Effect of Sheet Processing on the Microstructure, Tensile and Creep Behavior of INCONELâ alloy 718”, Metallurgical and Materials Transactions A, Vol. 37 Issue 1 (2006) 27-40.
J.N. Mitchell, M. Stan, D.S. Schwartz, and C.J. Boehlert, “Phase Stability and Phase Transformations in Plutonium and Plutonium-Gallium Alloys”, Metallurgical and Materials Transactions A, 35 issue 8 (2004) 2267-2278.
C.J. Boehlert, T.G. Zocco, R.K. Schulze, J.N. Mitchell, and R.A. Pereyra, “Electron Backscatter Diffraction (EBSD) of a Plutonium-Gallium Alloy”, Journal of Nuclear Materials, Vol. 312 (2003) 67-75. (LA-UR-02-4918)
C.J. Boehlert, J.D. Farr, R.K. Schulze, R.A. Pereyra, and J.C. Archuleta, “Initial Electron Backscattered Diffraction Observations of Cerium”, Philosophical Magazine, Vol. 83, no.14 (2003) 1735-1744. (LA-UR-02-3360)
C.J. Boehlert, R.K. Schulze, J.N. Mitchell, T.G. Zocco, and R.A. Pereyra, “Using A Multi-Disciplinary Approach, the First Electron Backscattered Kikuchi Patterns were Captured for a Plutonium Alloy”, proceedings of Symposium 2001, Championing Scientific Careers, Santa Fe, New Mexico, August 6, 2001. (LA-UR-01-3685)
C.J. Boehlert, R.K. Schulze, and J.N. Mitchell, “Electron Backscattered Kikuchi Patterns of a Plutonium Alloy Captured for the First Time”, http://www.lanl.gov/orgs/nmt/nmtdo/AQarchive/01summer/kikuchi.html; The Actinide Research Quarterly, Second Quarter, Summer 2001, Los Alamos National Laboratory, p. 1-3.
C.J. Boehlert, R.K. Schulze, J.N. Mitchell, T.G. Zocco, and R.A. Pereyra, “Initial Electron Backscattered Diffraction (EBSD) Observations of a Plutonium Alloy”, Scripta Materialia, Vol. 45/9 (2001) 1107-1115. (LA-UR-01-1198)
C.J. Boehlert, R.K. Schulze, J.N. Mitchell, T.G. Zocco, and R.A. Pereyra, “Initial Electron Backscattered Diffraction (EBSD) Observations of a Plutonium-Gallium Alloy”, Proceedings of SCANNING 2001, Scanning, vol. 23, 2 (2001) 66-67. (LA-UR-01-928)
C.J. Boehlert, “Part III. The Tensile Behavior of Ti-Al-Nb O+BCC Orthorhombic Alloys”, Metallurgical and Materials Transactions A, 32 (2001) 1977-1988. (LA-UR-00-3239)
C.J. Boehlert, D.M. Dimiduk, and K.J. Hemker, “The Phase Evolution, Mechanical Behavior, and Microstructural Instability of a Fully-Lamellar Ti-46Al(at.%) Alloy”, Scripta Materialia, Vol 46/4 (2002) 259-267. (LA-UR-01-3268)
C.J. Boehlert and J.F. Bingert, "Microstructure, Tensile, and Creep Behavior of O+BCC Ti2AlNb Alloys Processed Using Induction-Float-Zone Melting", Journal of Materials Processing Technology, vol. 117 (2001) 401-408. (LA-UR-00-3935)
C.J. Boehlert, B.S. Majumdar, and D.B. Miracle, “Application of the Cruciform Specimen Geometry to Obtain Transverse Interface Property Data in a High Fiber-Volume-Fraction SiC/Titanium Alloy Composite”, Metallurgical and Materials Transactions A, Vol. 32 issue #12 (2001) 3143-3155. (LA-UR-00-2935)
Marcus Zupan, M.J. Hayden, C.J. Boehlert, and K.J. Hemker, “Development of High Temperature Microsample Testing”, Experimental Mechanics, 41 no. 3 (2001) 242-247. (LA-UR-00-2211)
C.J. Boehlert, “The Effects of Forging and Rolling on Microstructure in O+BCC Ti-Al-Nb Alloys”, Materials Science and Engineering A, 279/1-2 (2000) 118-129.
C.J. Boehlert, Marc Zupan, D.M. Dimiduk, and K.J. Hemker, “Microsample Tension and Tension-Creep Testing of Fully-lamellar TiAl Single Crystals”, Gamma Titanium Aluminides 1999, ed. Y-W. Kim, D.M. Dimiduk, and M.H. Loretto (The Minerals Metals and Materials Society, 1999) 669-677.
C.J. Boehlert, “The Phase Evolution and Microstructural Stability of an Orthorhombic Ti-23Al-27Nb Alloy”, Journal of Phase Equilibria, vol. 20 no. 2 (1999) 101-108.
C.J. Boehlert, “Microstructure, Creep, and Tensile Behavior of a Ti-12Al-38Nb(at.%) Beta + Orthorhombic Alloy”, Materials Science and Engineering A, 267 (1999) 82-98.
C.J. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle, “Part I: The Microstructural Evolution in Ti-Al-Nb O+BCC Orthorhombic Alloys”, Metallurgical and Materials Transactions A, 30 (1999) 2305-2323.
C.J. Boehlert and D.B. Miracle, “Part II: The Creep Behavior of Ti-Al-Nb O+BCC Orthorhombic Alloys”, Metallurgical and Materials Transactions A, 30 (1999) 2349-2367.
C.J. Boehlert, B.S. Majumdar, S. Krishnamurthy, and D.B. Miracle, "Role of Matrix Microstructure on RT Tensile Properties and Fiber-Strength Utilization of an Orthorhombic Ti-alloy Based Composite", Metallurgical and Materials Transactions A, 28 (1997) 309-323.
C.J. Boehlert, B.S. Majumdar, and D. Eylon, “Properties and Damage Mechanisms in Three Classes of Titanium Composite Matrices”, Key Engineering Materials, vol. 127-131 Part I (1997) 843-850.
S.M. Russ, C.J. Boehlert, and D. Eylon, "Out-of-phase thermomechanical fatigue of titanium composite matrices", Materials Science and Engineering A, 192/193 (1995) 483-489.
C.J. Boehlert, “The Phase Evolution, Creep, and Tensile Behavior of Two-Phase Orthorhombic Titanium Alloys”, WL-TR-97-4118, Final Report for August 1996 to December 1997, Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, Ohio, 1997.
C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler, “Phase Evolution, Stability, and Microstructure-Creep Relations in an Orthorhombic Ti-23AL-27Nb Alloy”, Structural Intermetallics, ed. R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal (Warrendale, PA: The Metallurgical Society, 1997) 795-804.
C.J. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle, “The Phase Evolution, Tensile, and Creep Behavior of Near Stoichiometric Ti2AlNb Orthorhombic Alloys”, Orthorhombic Titanium Matrix Composites II, AF TR# WL-TR-97-4082, ed. P.R. Smith (1997) 212-227.
C.J. Boehlert, B.S. Majumdar, and V. Seetharaman, “Processing and Heat Treatment Effects on the Phase Evolution, Tensile, and Creep Behavior of an Orthorhombic Ti-25Al-25Nb Alloy”, Deformation and Fracture of Ordered Intermetallic Materials, W.O. Soboyejo, H.L. Fraser, and T.S. Srivatsan, eds., TMS, Warrendale, PA (1997) 565-582.
B.S. Majumdar, C.J. Boehlert, A.K. Rai, and D.B. Miracle, "Structure-Property Relationships and Deformation Mechanisms in an Orthorhombic Based Ti-25Al-17Nb Alloy", High Temperature Ordered Intermetallic Alloys-VI, Materials Research Society Symp. Proc., J. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, eds., Materials Research Society, Pittsburgh, PA (1995) vol. 364, 1259-1265.
B.S. Majumdar, C.J. Boehlert, and D.B. Miracle, "Deformation Mechanisms and Structure-Property Relations in O-Alloys and MMCs (Ti-25Al-17Nb System)", Orthorhombic Titanium Matrix Composites, Proc. Orthorhombic Titanium Matrix Composites Workshop, WL-TR-95-4068, Wright-Patterson Air Force Base, OH (1995) 65-82.
C.J. Boehlert, B.S. Majumdar, and D.B. Miracle, “Effect of Microstructure on the Tensile, Fatigue Crack Growth, and Creep Behavior of a Ti-25Al-17Nb Orthorhombic Alloy”, Fatigue and Fracture of Ordered Intermetallics II, W.O. Soboyejo, T.S. Srivatsan, and R.O. Ritchie, eds., TMS, Warrendale, PA (1995) 135-153.
