Spiral Antenna
Applicator
Some parameters of this antenna is given below
- Archimedes's spiral antenna: R = a2, where a = 0.14cm.
- Strip width is 0.5cm
- 3mm thickness FR4 substrate
- Excited at the center of the antenna
- Operated at 433MHz.
3D Human Model
The above figures show the 3D human model simulated in the FDTD programs. Green mesh shows human body contour. Red Mesh is the possible tumor location. Both are derived from patient's CT scans. The RF applicator is illustrated in blue. In the FDTD simulation, assume the human body is surrounded in water. Due to the RF applicator size and microwave power penetration. The FDTD model is 13cm by 13cm by 5cm and 23cm by 18cm.
2D illustration of the simulated model
2D images of the human body. Left: image at xz plane. Right: image at yz plane. Both locate in the center of the body. The layers from bottom to top are: water, skin, tumor, fat and muscle, illustrated by different colors. The RF applicators located in water layers, 4cm away from the skin. i.e. z = -4cm
Modeling Techniques
FDTD Modeling Techniques
- Yee Cell size = 1mm;
- Perfect Match Layer (PML) as the Absorbing Boundary Condition (ABC)
- Source Modeling:
- Soft source modeling for spiral antenna
- Transparent modeling for waveguide
Bio-Heat Transfer Equation (BHTE)
- Simulation result of FDTD is the electromagnetic power deposition. SAR is obtained by:
- Obtain heat distribution by the BHTE.
where T is the temperature, p is the mass density, c is the specific heat, k is the thermal conductivity, and QEM is the heat generation rate due to the deposited EM power and is easily obtained from the SAR.
Simulation Methods for Evaluation
Simulation Results
Electric field on xz plane
Electric field on yz plane
Temperature distribution on yz plane
Temperature distribution on xz plane
Both xz and yz plane locates at the center of the simulated area.
Run Scripts
Spiral Antenna
- Run main_spiSave.m
- This program obtain the power distribution in human body by RF applicators by Finite Difference Time Domain method.
- RF applicator: spiral antenna operated at 433MHz;
- The input data: chrot2spi.mat, which contains the simulation model. The model is illustrated in page 4.
- Output files:
- chestSAR.mat, which contains the electric power and SAR in the human body.
- main_spishow.m implements the same function, but does not save any data. Only show SAR distribution for every 30 time steps.
- Run compmyall.m
- Input files: SAR of the simulated model.
- Output files: temperature rise of the object due to the SAR distribution. The final result figures include power, SAR and temperature distribution.
- Bhte.c / bhte.dll (for windows)/bhte.mexglx(for Linux) is used to calculate the temperature rise.
Results Files Instruction
- Waveguide_SAR3k.avi: the movie shows the SAR distribution in human body for the first 3000 time steps.
- Spiral_Power*.avi: the movies show the electrical power distribution in human body for the first 4500 time steps. The movies are separated into 3 files.
- Spiral_chestSARfina3k.mat: stores the accumulated SAR at 3000 timesteps caused by spiral antenna applicator as mat format. It can be the input for the temperature calculation later.
- Waveguide_chestSAR3T.mat: stores the accumulated SAR caused by waveguide applicator as mat format. It can be the input for the temperature calculation later.

