Dimm slot adapter v1
This circuit board was designed by Andrew and Micajah with pads layout and fabricated by the ece shop. The circuit board was too thick to fit into the DIMM slot so Micajah cut it with a dremul tool until it would flex enough to fit into the board.
Dimm slot adapter v1 in dvr8412
This is the finished look with it securely connected to the DVR8412.
dimm slot adapter v1 with wires
We then soldered wires to the DIMM slot adapter so we could connect our MSP430 Experimenter board to it.
Control box internals
This box contains the ADC filters and potentiometer speed control for the MSP430 Experimenter board prototype.
control box top view
The nob on the top of the control box is what turns the potentiometer and the leds light up according to what signal is outputing at the moment.