ME 361 Dynamics - Fall 2021
Syllabus
Time and
Place: MWF 12:40-1:30, 1345 EB
Instructor:
Prof. Thomas
Pence, EB2452, 353-3889,
pence@egr.msu.edu
Instructional Mode: This is an in person
class, and so students must attend at the above scheduled time.
There is no online alternative to in person instructional mode for this section.
Exams will be held in the course room on the specific dates listed in the
schedule, and so students must be present in the course room at those times in
order to take exams. Exams, once completed, will be uploaded
to Crowdmark for grading and then physically submitted as well. In
addition to Crowdmark, the course will make use of D2L and
masteringengineering.com.
Prerequisites: MTH 234 and
CE/ME 221.
Learning Goals: Upon
succesful completion of this course, students will be able to:
construct an
accurate mathematical model of a dynamical system. This will encompass
kinematics of a particle, kinetics of a particle, kinematics of rigid body plane
motion and kinetics of rigid body plane motion. Kinematics involves
calculus based determination of velocity and accelerations. Kinetics
involves Newton's second law and its first integrals that go by the conventional
names of work-energy for space integration, and impulse-momentum for time
integration. In order to accomplish this efficiently, students must
make effective use of free body diagrams, coordinate systems and geometrical
constructs, vector analysis, trigonometic analysis, integral and differential
calculus, and accurate by-hand calculations.
Attendance
Policy: Absence from class can cause serious
confusion; students are expected to attend lectures which is the
standard
forum for class communication. Students are expected to prepare for class by
reading the text material and examining the sample problems in the text. Class absence is not an excuse for being
unaware of course announcements or course materials. If you are absent,
please see the course schedule web page to determine which pages in the course
text to study so as to cover the material you may have
missed.
The instructor is in no way responsible for providing lecture
notes
due
to student's absence.
Covid
Policy: As with all
MSU courses, we are subject to MSU covid policy. Please make sure
that you are in compliance and remain aware of current policy. At the
present time this requires adherance to a specific masking policy that will be
enforced.
Office Hours: by zoom from 2:30-3:30 on Wed and Friday
(more information below).
Helproom:
The ME learning center in room 1237EB is staffed on Sunday, Monday, Tuesday,
Wednesday and Thursday from 6-10 pm.
Required Course materials:
1) Textbook: Engineering Mechanics: Dynamics. Russel
Hibbeler, Prentice Hall, 14th edition, ISBN 9780133915389.
2)
www.masteringengineering.com
3) fully mechanical wristwatch or other timepeice with hour and
minute hands (and no digital capability) for determining the time while taking
exams.
Homework: Homework problems will be assigned regularly
making use of the masteringengineering.com learning resrouce.
Some homework may also be assgined that does not make use of this web resource.
The broad point is that homework should be viewed as a learning tool for
developing understanding of the material. Engagement with others is
useful, even essential, for learning, and students may collaborate on
homework in study groups so long as individual assignments are submitted.
Reproducing solutions that are available from online services is expressly
forbidden and will be grounds for disciplinary procedures.
Grading will either be done in the automated way associated with the
masteringengineering.com learning resrouce while regular style homework will be
graded on the basis of completion and basic strategy. Late homework submission will not be accepted.
Exams:
There are 3 exams during the semester (midterm exams) in addition to the final exam. The midterms are
closed-book, closed note, 50-minute, in-class exams. In contrast to
homework, no collaboration or use of external help is permitted for the exams.
Students may not sit next to each other. Use of
calculators or of any form of electronic device is not allowed, including
digital watches. All electronic devices must
be stowed in backpacks including digital watches. Headphones
and earbuds are not permitted. Caps with
brims must be removed. Make-up exams will
not be given in view of the "drop-one" grading scheme as described below. Early exams
will also not be given. Exam dates
are posted on the class schedule and
will not change. They are September 24, October 18, and
November 12.
Please plan accordingly.
Exam Specifics and
Grading: Specific infromation about the nature of the exam will be
communicated in lecture closer to the exam date. Grading will reflect the
importance of obtaining the absolutely correct answer, including units.
For certain problems there will be a partial credit option as an alternative to
correct/incorrect awarding of points. The partial credit option will never
result in less points than the correct/incorrect option. Because of
this, the default grading assumption is that students wish to obtain possible
partial credit. If you do not wish to obtain partial credit, please make a
note at the top of your exam, and partial credit will not be awarded.
If upon careful examination of a graded exam you feel that it was graded
incorrectly, please see me for a possible regrade. Please note that
regrades will only make use of the correct/incorrect grading modality. In
other words, no partial credit is awarded in a regrade even if the original
grade was awarded with partial credit.
Final Exam: A final will be held on
December 14 according to the university schedule of courses. It will
cover both new material since the prevous exam as well as review material.
It is subject to the same procedures as the midterm exams.
Office Hours: Office hours will
be held by zoom from 2:30 to 3:30 pm. We will always use the same link,
which has been sent out to students via the university email system.
Students should prepare for office hours by organizing their thoughts and being
prepared to discuss what they have tried on their own prior to the office hours.
Email:
While email is useful for the communication of quick information and for the
clarification of easily expressible matters, detailed technical issues are best
handled in office hours. When email is appropriate, all such communication must
comply with professional standards. In subject lines, please use: "ME 361
student" followed by a modifier, e.g., "ME 361 student, HW 2 prob. 3". An
appropriate salutation (e.g., Prof. or Dr.) as well as contact information
should be included in the message. Again, subject lines must start
with "ME 361 student...". Subject lines that start with "Re: ME 361
student:..." are not easily tracked on my email system, and may not be read.
Grading Scheme:
Your grade is determined by 20% for homework, and 25% each for two out of three
best midterm exam grades. The final exam is worth 30%. Thus this
procedure is equivalent to a ``drop one midterm exam'' policy. Based on your
percentage as determined by this procedure, your ME 361 course grade is computed
as follows:
| raw score |
>=90% |
>=85% |
>=80% |
>=75% |
>=70% |
>=65% |
>=60% |
<60% |
| grade |
4.0 |
3.5 |
3.0 |
2.5 |
2.0 |
1.5 |
1.0 |
0 |
In the unlikely event that this table will produce overly low grades,
some cut-off percentages may be lowered. In this sense, the
above is a table of lower bounds. However, do not count on this, so
plan according to the table (note the term "unlikely event").
Commercialization of Course
materials: Commercialization of lecture notes and university-provided
course materials is not permitted in this course. This means it is
not allowable to post any of the course materials on-line, including but
not limited to exams, exam solutions, example problem solutions, videos, course
notes or other materials provided by the instructor. Lectures and
office hours may not be recorded by students although quick snapshots of
the lecture board or lecture screen for your own use are OK.
Ethics:
Engineers must adhere to a rigorous code of
professional ethics. Unethical conduct in ME361 will result in the
maximum
disciplinary action permitted by Michigan State University. Academic dishonesty
will result in a gradee of 0.0 ofr the course, and an academic dishonesty report
being filed with the Associate Dean of Engineering. In extreme cases, a
recomendation for expulsion will be filed.
Unethical
conduct in this class includes, but is not limited to: copying from any
source on
exams, supplying information to others on exams (students bear responsibility for
ensuring the security of their examination papers), copying homework solutions
from on-line sources or from other students who obtained solutions from on-line
sources (as mentioned previously, homework solutions developed in study groups
is allowed so long as all students are making a contribution and on-line
solution providing services are not consulted).
Please note
that the
Spartan Code of Honor reads
As a Spartan I will strive to uphold
values of the highest ethical standard. I will practice honesty in my
work, foster honesty in my peers, and take pride in knowing that honor is worth
more than grades. I will carry these values beyond my time as a student at
Michigan State University, continuing the endeavor to bulid personal integrity
in all that I do.
If you have any
questions, your instructor is available to discuss issues of
professional
expectations and ethics.