This table will be updated as necessary regarding
homework problems. Last column shows problems to he handed
in. The other column shows additional suggested study
problems. At this time, dates for homework and exams are as
shown. HW problems will be added as the course progresses.
Exact placement of topics, especially after the next exam, is subject
to adjustment.
| 1/12 W |
1.5-1.6 |
Fluid
properties |
Chapter 1 homework: 14, 30, 40,
44, 53, 79, 80 |
|
| 1/14 F |
2.1-2.3 |
pressure differentials, manometry | Chapter 2: 26, 28, 29, 30, 35, 39 |
|
| 1/17 M |
MLK day No class |
|
||
| 1/19 W |
2.3-2.7 |
Hydrostatics: forces
on submerged surfaces |
Chapter 2: 40, 41, 43, 46, 48 | |
| 1/21 F |
2.7 |
Hydrostatics: forces on submerged surfaces, pressure prism |
Chapter 2: 50, 53 |
|
| 1/24 M |
2.7 |
Hydrostatics: Bouyancy, flotation, Archimedes principle | Supplemental problem- containment boom, also chapter 2: 72, 73, 76, 86, 88 |
HW due: Chapter 2: 29, 35, 46, 53. |
| 1/26 W |
2.4, 2.5, 2.6 (review material, does not correlate with lecture) |
Accelerating fluid plugs | Suggested and required problems emailed
to all students |
|
| 1/28 F |
3.1-3.2 |
Conservation of
mass |
Suggested and required problems emailed to all students | |
| 1/31 M |
3.3 |
Conservation of
mass |
chapter 3: 2, 14, 19, 23, 24 - comment: in
a test situation, the integral formula associated with prob. 14 would
be provided; in contrast, formulae associated with problem 23
would not be provided. |
|
| 2/2 W |
SNOW DAY |
SNOW DAY | SNOW DAY | SNOW DAY |
| 2/4 F |
3.4 | Reynolds Transport Theorem | HW due: please submit the 4 hydrostatic problems emailed in connection with the 1/26 and 1/28 lecture. | |
| 2/7 M |
Exam #1 | |
Exam #1 | |
| 2/9 W |
3.4 |
Conservation of Momentum - Examples |
chapter 3: 33a, 34a, 36a
(in 34 and 36 it is assumed that the pressure is atomospheric, and
hence cancels out) |
|
| 2/11 F |
3.4 |
Conservation of Momentum - Examples, Conservation of energy, | Hand
out emailed to all students containing pipe
flow problem and cone problem. First
of these is to be submitted. chapter 3: 34b, 36b, 50. (The result of the pipe flow problem gives the factor in problems 34b, 36b). |
|
| 2/14 M |
3.5 |
Conservation of Energy |
Chapter 3: 63 | Problem 63: assume constant diameter pipe to exit, intake to motor at patm with v=0, and vertical distances of 1 m from buried pipe to fish spout, 1.5 m from fish spout to top of water spray. |
| 2/16 W |
3.5 |
Bernoulli's equation | Chapter
3: 59, 60, 64, 65
|
In problem 64 take a diagram similar to
page 116, i.e., pump at bottom. Also in this problem take
all pressures as gage pressures. Finally, please change the
height from 20 m to 15 m (otherwise two terms essentially cancel, and
could go either way depending on whether you take rho=1000 or 998.8,
etc.). |
| 2/18 F |
4.1-4.3 |
Flow kinematics | Chapter
3: 78, 79/80, 81/82 |
I
lump 79 and 80 together, and the same for 81 and 82. Either
method would be fine (one can argue as to where one method ends and the
other begins). In any event, these problems are all worth
considering closely. |
| 2/21 M |
4.4 |
Lagrangian vs. Eulerian | Chapter 4: 14, 18 |
|
| 2/23 W |
4.5, 4.6 | Streamlines, pathlines,
streaklines. Circulation |
Chapter 4: 59 |
Comment on lecture: For our purposes,
this is a short read because we will not stream functions or velocity
potentials. In class lecture also finished up on 4.4 and started
4.6. HW due: The first problems emailed out on 2/11. Also, chapter 3 problems 64, 65, and 81/82. |
| 2/25 F |
4.6 |
Deformation of fluid elements |
Chapter 4: 50, 68,
69 Chapter 4 submitted problems |
Comment on lecture: I do not not introduce the rate of deformation tensor (it is merely twice the rate of strain tensor) although some of the suggested homework problems use this terminology. In those problems please consider it a problem for the rate of strain tensor. Note also that I do introduce the vorticity tensor as the skew part of the velocity gradient tensor (see discussion after 4.24). |
| 2/28 M |
5.2.1 |
Conservation of mass PDE | ||
| 3/2 W |
|
Conservation of mass examples | (to be
covered on Exam #3) Chapter 5: 12, 13, 14, 16, 18, 19, 20 (submit on 3/23) |
HW due: Chapter 4 submitted problems - emailed on 2/25 |
| 3/4 F |
Exam #2 |
|
Exam #2: To cover material since last exam. Will not cover chapter 5. Same rules as previous exam. | |
| 3/7 - 3/11 |
Spring Break - No class |
|||
| 3/14 M |
5.2 | Conservation of momentum PDE | Comment on book: It is in section 5.2
that the book chooses to do the type of problems that we treated on Jan
26. The book treats these using the conservation of momentum PDE,
whereas we did them more directly by simply noting that if there is no
relative motion of fluid particles, then they can be done by ME 361
type methods. |
|
| 3/16 W |
5.1, 5.3, 5.5 |
Fluid stress, Constitutive
theory, Navier-Stokes equations |
Chapter 5: 42, 43, 44, 45 |
|
| 3/18 F |
5.4, 7.2 |
Poiseulle flow in channels | 5:48, 49 |
|
| 3/21 M |
7.2 |
Poiseulle flow in channels,
Boundary conditions, discussion |
7: 2, 3, 4 | |
| 3/23 W |
7.4 |
Gravity flow down an inclined
plane |
7: 5, 6, 7: 16, 17 take x=0 to be stationary, and x=h to be moving (due on 4/1). |
As
indicated in class today, we have done separate examples involving flow
due to: (1) solid boundaries moving relative to each other, (2)
pressure gradients, (3) gravity. Problems 5 and 6 combine the
first two effects. Problems 16 and 17 combine the first and third
effect. |
| 3/25 F |
class notes 6.1 |
The mudslide problem. Dimensionless groups |
Please refer to email doc
"Additional homework....". Problems 1 and 3 are suggested.
Problems 2
and 4
are to be submitted on 4/1 |
HW due: 5: 14, 20, 44 and 7:4 |
| 3/28 M |
6.1 | Buckingham Pi Theorem |
6: 15, 17, 19, 26,
30, 35.
In your submitted solution to 26 please show how the input
dimensionless groups can be expressed in terms of both Re and a Mach
number. |
|
| 3/30 W |
6.2 |
Scaling the Navier-Stokes system |
||
| 4/1 F |
7.3 |
Poiseulle flow in pipes, discussion | HW due: 7: 16, 17, Problems 2 and 4 from 3/25 email doc, 6: 26, 35. | |
| 4/4 M |
Exam #3 | |
Exam #3 | |
| 4/6 W |
8.1, 8.2 |
the Boundary layer concept | ||
| 4/8 F |
8.2 |
Momentum
integral theory, Laminar boundary layer flow |
In section 8.2 we will
not discuss (and you are not responsible for) the Blasius solution
theory as developed on pp. 273-276. However you should know that
there is something called a Blasius solution that results in equations
(8.14) and (8.15). Also, the concept of equation (8.16) is a
general nondimensionalization, and so you should know that as well. |
|
| 4/11 M |
8.2 |
Laminar boundary
layer flow - plate drag |
8: 7, 8, 10, 11 |
|
| 4/13 W |
8.3 |
Turbulent boundary layer flow |
8: 1, 3, 4, 5 | The indicated problems
are relatively easy "formula pluggers". Note that example 8.3 on
pp. 278-280 discusses vorticity in the boundary layer, which is
useful in doing problem 1. Also note that this example makes
reference to the Blasius solution, which you need not know. The
example however remains helpful without the Blasius solution discussion
(simply ignore the material between "According to ..." on page 79
through "... is shown in Figure 8.10" on page 280.) |
| 4/15 F |
8.4 |
External flows:
separation, viscous drag, form drag |
8: 24, 26, 31, 34 (this problem is almost trivial), 38 | In section 8.4 please
correct the following: (a) CD on vertical axis in Figure 8.26 is defined in the usual way of eqn. (8.30) so ignore the equal sign and beyond on the vertical axis. (b) the u squared was omitted on the second equation on p. 307, please correct your text. |
| 4/18 M |
8.4 |
External Flows - drag and lift,
vortex shedding |
8: 28, 35 , 36, 37 (see comment in next column). | In
problems 35 and 37 use figure 8.26 to find the drag coefficient. Problem 37 is more involved than the other hand-in problems since two integrations are required to go from the acceleration formula F = m a to a formula for distance. |
| 4/20 W |
8.5 |
Internal flows - friction factor |
8: 53, 58, 63 | HW due 8:10, 11, 31, 34, 35, 37. |
| 4/22 F |
8.5 |
Modified energy equation
(Bernoulli) for major loss |
8: 64, 66, 67, 70 (note I think the figure reference is figure 8.43) | |
| 4/25 M |
8.5 |
Minor losses | 8: 55, 56, 68, 69 | In problem 55,
treat the 180o bend as two 90o
bends. Also, the height h goes to the top of the free
surface, not to the pipe entrance. Problem 69 requires a bit of iteration (initial guess and refine, repeat). |
| 4/27 W |
8.5 | Examples | 8: 60,
72 In the statement of problem 60 replace terminology "Example 8.5.3" with "Example 8.20". |
Our section 8.5 study of
pipe flow will conclude on page 332 of the book. You are not
responsible for so-called type IV problems nor for the material in
section 8.5.5 (piping networks) |
| 4/29 F |
Design Day - No Class |
HW due 8: 70, 55, 69 | ||
| 5/5 Th |
Final
Exam |
10:00 - 12:00 |
Final
Exam |