Biography
Himanshu has been involved in Additive Manufacturing/3D Printing using laser energy since 2011. His graduate work and industrial experience was focused on Laser based Directed Energy Deposition (Laser-DED) 3D Printing and Hybrid Manufacturing of metallic and metal-ceramic structures.
His research group is a part of the larger Laboratory of Advanced Manufacturing Processes (LAMP) at Michigan State University.
Group website: https://www.egr.msu.edu/lamp/
Awards
1. Co-PI; “HIPPED” - Heat-Exchanger Intensification Through Powder Processing and Enhanced Design; U.S. Department of Energy Advanced Research Project Agency (ARPA-E).
2. Co-PI; “TOP-HEX” - Topology Optimization of Additively Manufactured Heat-Exchanger Plates for Enhanced Performance (Awarded to University of Connecticut); U.S. Department of Energy Advanced Research Project Agency (ARPA-E).
Education
Ph.D. Mechanical Engineering, Washington State University, 2016.
M.S. Materials Science and Engineering, Washington State University, 2012.
B.Tech. Metallurgical Engineering, National Institute of Technology, Raipur, India, 2011.
Publications
O’Neil, A., Kinzer, B., Bala Chandran, R. and Sahasrabudhe, H., 2023. Improving Structural Integrity of Direct Laser-Deposited Ni–Co–Cr–Al–Y Superalloys by Alloy Modification. Journal of Manufacturing Science and Engineering, 145(2), p.021012.
Aydogan, B. and Sahasrabudhe, H., 2022. Effects of Heat Treatment on Direct Laser Fabricated Stainless Steel 420-Inconel 718 Alloy Multi-material Structures. Journal of Materials Engineering and Performance, pp.1-10.
Rahman, M.M., Huanes-Alvan, G., Sahasrabudhe, H. and Chakrapani, S.K., 2021, July. Elastic Properties of IN718 Fabricated via Laser Directed Energy Deposition (DED). In Quantitative Nondestructive Evaluation (Vol. 85529, p. V001T15A001). American Society of Mechanical Engineers.
Aydogan, B. and Sahasrabudhe, H., 2021. Enabling Multi-Material Structures of Co-Based Superalloy Using Laser Directed Energy Deposition Additive Manufacturing. Metals, 11(11), p.1717.
Aydogan, B., O'Neil, A. and Sahasrabudhe, H., 2021. Microstructural and mechanical characterization of stainless steel 420 and Inconel 718 multi-material structures fabricated using laser directed energy deposition. Journal of Manufacturing Processes, 68, pp.1224-1235.
Huanes-Alvan, G.E., Aydogan, B., Sahasrabudhe, H. and Chakrapani, S.K., 2020. Ultrasonic properties of Inconel 718 fabricated via laser-directed energy deposition. The Journal of the Acoustical Society of America, 148(4), pp.2648-2648.
Thakkar, Darshan, and Himanshu Sahasrabudhe. "Investigating microstructure and defects evolution in laser deposited single-walled Ti6Al4V structures with sharp and non-sharp features." Journal of Manufacturing Processes 56 (2020): 928-940.
Sahasrabudhe, H., Traxel, K.D. and Bandyopadhyay, A., 2021. Understanding wear behavior of 3D-Printed calcium phosphate-reinforced CoCrMo in biologically relevant media. Journal of the Mechanical Behavior of Biomedical Materials, 120, p.104564.
Sahasrabudhe Himanshu, Ryan Harrison, Christian Carpenter and Amit Bandyopadhyay. "Stainless steel to titanium bimetallic structure using LENS™." Additive Manufacturing 5 (2015): 1-8.
Sahasrabudhe, Himanshu, and Amit Bandyopadhyay. "Laser-Based Additive Manufacturing of Zirconium." Applied Sciences 8.3 (2018): 393.
Sahasrabudhe, Himanshu, Susmita Bose, and Amit Bandyopadhyay. "Laser processed calcium phosphate reinforced CoCrMo for load-bearing applications: Processing and wear induced damage evaluation." Acta biomaterialia 66 (2018): 118-128.
Sahasrabudhe, Himanshu, and Amit Bandyopadhyay. "In situ reactive multi-material Ti6Al4V-calcium phosphate-nitride coatings for bio-tribological applications." Journal of the mechanical behavior of biomedical materials 85 (2018): 1-11.
Bose, Susmita, Dongxu Ke, Himanshu Sahasrabudhe, and Amit Bandyopadhyay. "Additive Manufacturing of Biomaterials." Progress in Materials Science (2017).
Heer, Bryan, Himanshu Sahasrabudhe, Asit Kumar Khanra, and Amit Bandyopadhyay. "Boron nitride-reinforced SS316 composite: influence of laser processing parameters on microstructure and wear resistance." Journal of Materials Science 52, no. 18 (2017): 10829-10839.
Sahasrabudhe, Himanshu, and Amit Bandyopadhyay. "Additive Manufacturing of Reactive In Situ Zr Based Ultra-High Temperature Ceramic Composites." JOM 68, no. 3 (2016): 822-830.
Zhang Yanning, Himanshu Sahasrabudhe and Amit Bandyopadhyay. "Additive manufacturing of Ti-Si-N ceramic coatings on titanium." Applied Surface Science 346 (2015): 428-437.
Sahasrabudhe, Himanshu, Julie Soderlind, and Amit Bandyopadhyay. "Laser processing of in situ TiN/Ti composite coating on titanium." Journal of the mechanical behavior of biomedical materials 53 (2016): 239-249.
Primary Department
