Example description

  
PWM

This example application utilizes the PWM peripheral to output a 25% duty
cycle PWM signal and a 75% duty cycle PWM signal, both at 440 Hz.  Once
configured, the application enters an infinite loop, doing nothing while
the PWM peripheral continues to output its signals.

UART0, connected to the FTDI virtual COM port and running at 115,200,
8-N-1, is used to display messages from this application.

-------------------------------------------------------------------------------

Copyright (c) 2009 Luminary Micro, Inc.  All rights reserved.
Software License Agreement

Luminary Micro, Inc. (LMI) is supplying this software for use solely and
exclusively on LMI's microcontroller products.

The software is owned by LMI and/or its suppliers, and is protected under
applicable copyright laws.  All rights are reserved.  You may not combine
this software with "viral" open-source software in order to form a larger
program.  Any use in violation of the foregoing restrictions may subject
the user to criminal sanctions under applicable laws, as well as to civil
liability for the breach of the terms and conditions of this license.

THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

This is part of revision 4652 of the EK-LM3S9B92 Firmware Package.