Michael E. Mackay

Professor of Chemical Engineering

 

back to the M.E. Mackay web page

Recent Publications

 

·         M. E. Mackay, Y. Hong, S. Hong, T. P. Russell, C. J. Hawker, R. Vestberg and J. Douglas, "The influence of dendrimers on the dewetting of thin polystyrene films," Langmuir, 18 (2002) 1877-1882.

·         M. E. Mackay, M. Jeong, Y. Hong, S. Hong, S. P. Gido, B. Tande, N. J. Wagner, C. J. Hawker and R. Vestberg, "Self assembly of dendrimer-linear polymer block copolymers into ordered structures," Macromolecules, 35 (2002) 8391 -8399.

·         V. T. O'Brien and M. E. Mackay, "Shear and elongation flow properties of kaolin suspensions," Journal of Rheology, 46 (2002) 557-572.

·         M. Jeong, M. E. Mackay, C. J. Hawker and R. Vestberg, "Intrinsic viscosity variation in different solvents for dendrimers and their hybrid copolymers with linear polymers," Macromolecules, 34 (2001) 4927-4936.

·         M. E. Mackay, G. Carmezini, B. B. Sauer and W. Kampert, "On the surface properties of hyperbranched polymers," Langmuir, 17 (2001) 1708-1712.

·         M. E. Mackay, G. Hay and C. J. Hawker, "On the thermodynamic properties of dendrimers compared to linear polymers: General observations," J. Poly. Sci. Part B: Poly. Phys., 39 (2001) 1766-1777.

·         B. M. Tande, N. J. Wagner, M. E. Mackay, C. J. Hawker and M. Jeong, "Viscosimetric, hydrodynamic, and conformational properties of dendrimers and dendrons," Macromolecules, 34 (2001) 8580-8585.

·         G. Hay, M. E. Mackay, S. A. McGlashan and Y. Park, "Comparison of shear stress and wall slip measurement techniques on a linear low density polyethylene," J. Non-Newton. Fluid Mech., 92 (2000) 187-201.

·         Y. Hong, S. J. Coombs, J. J. Cooper-White, M. E. Mackay, C. J. Hawker, E. Malmström and N. Rehnberg, "Film blowing of linear low density polyethylene blended with a novel hyperbranched polymer processing aid," Polymer, 41 (2000) 7705-7713.

·         R. G. Horn, O. I. Vinogradova, M. E. Mackay and N. Phan-Thien, "Hydrodynamic slippage inferred from thin film drainage measurements in a solution of nonabsorbing polymer," J. Chem. Phys., 112 (2000) 6424-6433.

·         V. T. O'Brien and M. E. Mackay, "Stress components and shear thickening of concentrated hard sphere suspensions," Langmuir, 16 (2000) 7931-7938.

·         K. M. Awati, Y. Park, E. Weisser and M. E. Mackay, "Wall slip and shear stresses of polymer melts at high shear rates without pressure and viscous heating effects," J. Non-Newtonian Fluid Mech., 89 (1999) 117-131.

·         J. J. Cooper-White and M. E. Mackay, "Rheological properties of poly(lactides). Effect of molecular weight and temperature on the viscoelasticity of poly(l-lactide)," J. Poly. Sci.: Poly. Phys., 37 (1999) 1803-1814.

·         G. Hay, M. E. Mackay, K. M. Awati and Y. Park, "Pressure and temperature effects in slit rheometry," J. Rheology, 43 (1999) 1099-1116.

·         Y. Hong, J. J. Cooper-White, M. E. Mackay, C. J. Hawker, E. Malmström and N. Rehnberg, "A novel processing aid for polymer extrusion: Rheology and processing of polyethylene and hyperbranched polymer blends," Journal of Rheology, 43 (1999) 781-793.

·         S. A. McGlashan and M. E. Mackay, "Comparison of entry flow techniques for measuring elongation flow properties," J. Non-Newtonian Fluid Mechanics, 85 (1999) 213-227.

·         P. J. Farrington, C. J. Hawker, J. M. J. Fréchet and M. E. Mackay, "The melt viscosity of dendritic poly(benzyl ether) macromolecules," Macromolecules, 31 (1998) 5043-5050.

·         M. E. Mackay and D. J. Henson, "The effect of molecular mass and temperature on the slip of polystyrene melts at low stress levels," J. Rheology, 42 (1998) 1505-1517.

·         S. A. McGlashan, V. T. O'Brien, K. M. Awati and M. E. Mackay, "Approximate elongation flow properties utilising the opposed orifice technique - Correction for shear and inertia," Rheological Acta, 37 (1998) 214-222.

 

back to the M.E. Mackay homepage.

 

Go Spartans!