Archive for the ‘News’ Category

2012-2013 Recruiting

Posted by David Caples On August - 13 - 2012

Fall semester is rapidly approaching, which means it’s almost time for new members to join our team! Find us at the following events to see what we’re all about, check out the car, and sign up for our mailing list to start the process to join!

Monday, Aug. 27 – All day
Outside Wilson Hall

Tuesday, Aug. 28 – 9:00 AM to 8:00 PM
Colloquium at the Engineering Building (9:00 AM to 2:00 PM)
Sparticipation at Munn Field (3:00 PM to 8:00 PM)

Thursday, Aug. 30 – All day
Outside the Engineering Building on Shaw Ln.

Tuesday, Sep. 4 – All day
Outside Business College

Wednesday, Sep. 5 – All day
Outside Business College

Wednesday, Sep. 19 – 7:00 PM to 9:00 PM
Main Recruiting Meeting in 1345 the Engineering Building
(Big auditorium by Sparty’s on the west side of the building)

Tuesday, Sep. 25 – 5:30 PM to 9:30 PM
O-Night in Wilson Hall

It is very important to attend the main recruiting meeting if you plan on joining! A lot of information about the team and how to join will be presented in the meeting. However, we all understand if you can’t make it and missing it doesn’t mean you can’t still join the team. Just let us know if you can’t make it, we’ll fill you in on what you missed.

Feel free to contact Team Captain Chris Archambo ( with any questions.

Also, make sure to follow us on Facebook! Click here to visit our page. We coordinate most of the recruiting through our Facebook page.

Remember, anyone can join the team. All majors are accepted and no previous knowledge is required! Freshman through Super-senior, even grad students, may participate.

6th Place Overall at FSAE-Lincoln!

Posted by David Caples On July - 2 - 2012

After the disappointment at Michigan, the team was determined to reach the full potential of the vehicle and finish in the top 10 at Lincoln. Between the two competitions, the entire car had been pushed to its limits during testing. The team had logged over 350 miles of testing on the vehicle and the vehicle tune was highly refined. Many improvements had been made to the two components that failed during Michigan and the car was much more reliable.

The first day of competition went extremely well, the vehicle passed every step of the technical inspection on the first attempt and we were able to get the car out onto the small practice track that was set up. Using the resulting data, the car was further adjusted to the extremely high-traction surface of the Lincoln site.

The team performed well in the cost and presentation events resulting in 15th and 21st positions, respectively. For the first time in four years the team made it to the design finals and ended up placing 4th overall! Design finals were an incredibly rewarding experience from which the knowledge gained will carry over into the new vehicle’s design. The other design finalists included: the University of Washington, the University of Kansas – Lawrence, the University of Texas – Arlington, Missouri University S&T, McGill University, Centro Universitario Da FEI, and Texas A&M University – College Station.

Then in the dynamic events, the team placed 13th and 2nd overall in Skid Pad and Acceleration, respectively. Another top 3 finish in the Acceleration event! In Autocross, the car setup was much improved over the set up at Michigan and our fastest lap time placed us in 11th overall. Our drivers reported that the car felt very balanced and we were in good shape for the endurance event. The rest of the day was spent preparing the car for Endurance. No shortcuts were being taken after what happened at Michigan, every single fastener and component was inspected.

In Endurance, the first driver performed exceptionally well, posting lap times rivaling those of the fastest teams. The car looked and sounded great. Then, at driver change, the car fired up with very little hesitation and our second driver also pushed the car to its limits. Indescribable emotion filled the team as the car took the checkered flag and finished Endurance. We used 1.013 gallons of fuel to complete the endurance, an astonishing 40% less than the previous year, placing us in 14th in the event. We were unsure how we placed in Endurance, but SAE made us re-tech (which they do to the top-finishing competitors), which was a first for the current team members. We, of course, passed with no issues. During the award ceremony, they listed off the teams that finished all events that were not in the top 10…. And our name wasn’t called, we made the top ten! After a dramatic listing of the top ten teams, we heard our named called in the 6th position! The first top ten finish for the team in over 4 years! We ended up finishing 13th in Endurance.

We cannot thank our sponsors enough for giving us the opportunity to experience what we did in Lincoln. Not only did we learn many technical and life skills that will help us in our careers, but we built memories and friendships that will last for entire lives. Without your support, none of this would have been possible.

We are extremely excited for the upcoming year! Eight of the nine current team members will be returning to the team and we are expecting great things. We hope to see everyone back on board for the 2012-2013 year! The vehicle design is already underway.

Tough Finish at FSAE-Michigan

Posted by David Caples On July - 2 - 2012

The competition started out strong for us. We easily passed technical inspections with only minor vehicle adjustments. Design went extremely well, and we ultimately ended up placing 11th. We were informed by our design judges during our design review that we would have been the next car into design finals, had the car been a little lighter. Something we will definitely pursue for both Lincoln and next year! We also placed 25th and 58th in the Presentation and Cost events, respectively.

The car performed very well in the Acceleration event, winning 2nd place overall. However, in Skid Pad and Autocross, it was evident that the car’s setup was not tuned very well for the new, more slick, surface at MIS. The team placed 39th and 47th, respectively.

Overnight, the vehicle was adjusted and prepared for the Endurance. The car’s handling was much improved during the first stint of the Endurance; however the shifting system blew a fitting on lap 4, causing the vehicle to be stuck in second gear. At driver change, the car was looked over by the tech inspectors and cleared to continue, however the engine would not restart for the second driver. After further investigations, it appears as though the starter motor overheated and did not produce enough torque to turn the engine over. A full investigation will need to be launched into both issues prior to Lincoln.

The team left with disappointment at Michigan. However, the disappointment was not because the car wasn’t designed well, but rather the team knew it had just barely touched its potential. However, that disappointment rapidly turned into determination for the next competition, which was just over a month away. We ended up placing 48th overall out of 118 registered teams.

We would like to thank our sponsors for supporting us the entire year. This competition was a huge learning experience and the knowledge gained will be applied to Lincoln. We are definitely shooting for a top ten finish at Lincoln!

no images were found

3rd Place Finish in Endurance at Goodyear Shootout!

Posted by David Caples On October - 11 - 2011

The MSU Formula Racing Team finished endurance in 3rd place at the 2011 Goodyear Shootout! The event was hosted on September 17th at the Goodyear Proving Grounds in Akron, Ohio. Scott Smith and Chris Archambo put together an endurance time that only the University of Akron and Missouri S&T could beat, who finished first and second respectively. The team would like to thank Goodyear and all of the volunteers for hosting the event, it was an incredible day and a great learning experience.

2011-2012 Fall Recruiting

Posted by David Caples On August - 2 - 2011

Fall semester is just a little over three weeks away. Therefore it’s almost time to begin to recruit new team members to the team! Keep checking the website and follow our Facebook for more information about recruiting! Also you can email Brady Thom, the Project Manager, at to be added to a mailing list for future updates.

Remember, anyone can join the team. All majors are accepted and no previous knowledge is required! Freshman through Super-senior, even grad students, may participate.

More information will follow in the next couple weeks as recruiting events get scheduled so stay tuned.

15th Place at FSAE MIS 2011!

Posted by David Caples On August - 2 - 2011

After a year of hard work, the team finished in 15th place overall out of 122 teams, a 9 position increase compared to last year. The event went very smoothly with not a single technical problem while driving and the car passed technical inspections without a single car adjustment, the first time in MSU history! The team scored 15th in Design, 26th in Presentation, 35th in Cost, 19th in Acceleration, 33rd in Skid Pad, 10th in Autocross, 13th in Endurance, and 36th in Fuel Economy. The team was one of only 36 teams (29.5%) to complete the Endurance event and only 27 teams (22.1%) to score in every event.

We cannot thank our sponsors enough who supported us through the entire year. Without their support, none of this success would have been possible. The team plans to build on this success and is already hard at work designing the 2011-2012 Car, a car that is shooting for podium!

More pictures to come!

Getting Revved Up

Posted by Josh Frontiera On January - 18 - 2011

Check out the front cover of the State News!

Revved Up

Car 51 Manufacturing

Posted by Josh Frontiera On January - 14 - 2011

Car 51 is starting to look like a race car now! The chassis is being finish welded as we speak and many of the components of the race car are being fabricated. Check out some of the pictures posted under Car 51 manufacturing.

We will begin to post video’s of team member’s progress with Car 51 as we progress through the Spring Semester. Sooner than later, we will have a full bore race car on our hands!

Go Green. Go White. Go Fast!IMG_3170

NAIAS 2011

Posted by Josh Frontiera On January - 12 - 2011


Hey all!
The MSU Formula Racing Team is at the North American International Auto Show again this year! Come check out our exhibit located on the Concourse across from the entrance of Detroit Hall. We’d love to chat with you regarding the progress on our 2011 race car and review some of our past Race Cars including Car 71, 51 and Car 9.

The show looks great so come check it out! We look forward to seeing you at COBO!

Big thanks to the following sponsors who made our exhibit possible!

NAIAS, Skyline West Michigan, MSU College of Engineering, EPJ Logistics, D.E. McNabb, Convention Show Services, Allegra Printing, and ASAP Printing.

Seasons Greetings!

Posted by Alex Piku On December - 20 - 2010

The fall semester at Michigan State has come to an end, and team members have finished with their classes and exams. As the team begins its most intense period of fabrication over winter break, we would like to wish all of our friends and supporters the very best this holiday season. The Team is looking forward to 2011 being a great year for racing!