List of Publications Journal Papers: Nader Abedrabbo, Robert Mayer, Christopher Salisbury, Michael Worswick, and Isadora van Riemsdijk, “Crashworthiness of advanced high-strength steel tubes: experimental and numerical results”, To be submitted J. of Impact Engineering, October 2007. Nader Abedrabbo, Michael Worswick, Robert Meyer and Isadora van Riemsdijk “Optimization methods for the tube hydroforming process applied to advanced high-strength steels with experimental verification”, Submitted to J. of Mat. Processing Tech. Sep. 2007. Nader Abedrabbo, Farhang Pourboghrat and John Carsley, “Forming of AA5182-O and AA5754-O at Elevated Temperatures using Coupled Thermo-Mechanical Finite Elements Models”, (Submitted to International Journal of Plasticity April 2006). Nader Abedrabbo, Farhang Pourboghrat and John Carsley, “Forming of Aluminum Alloys at Elevated Temperatures –Part 1: Material Characterization”, International Journal of Plasticity, Volume 22, Issue 2, February 2006, Pages 314-341. Nader Abedrabbo, Farhang Pourboghrat and John Carsley, “Forming of Aluminum Alloys at Elevated Temperatures –Part 2: Numerical Modeling and Experimental Verification”, International Journal of Plasticity, Volume 22, Issue 2, February 2006, Pages 342-373. N. Abedrabbo, M. Zampaloni and F. Pourboghrat “Wrinkling Control in Aluminum Sheet Hydroforming”, International Journal of Mechanical Sciences, Volume 47, Issue 3, March 2005, Pages 333-358. Zampaloni M., Abedrabbo N. and Pourboghrat F. “Experimental and Numerical Study of Stamp Hydroforming of Sheet Metals”, International Journal of Mechanical Sciences, Volume 45, Issue 11, November 2003, Pages 1815-1848.
Conference Papers (Refereed): Nader Abedrabbo, Robert Mayer, Michael Worswick, Isadora van Riemsfijk, “Tube Hydroforming Optimization of High-Strength Steel Tubes”, in NUMISHEET2008, Interlaken, Switzerland, September 1-5, 2008. Nader Abedrabbo, Robert Mayer, Michael Worswick, Isadora van Riemsfijk, “Crashworthiness of High-Strength Steel Tubes”, in NUMISHEET2008, Interlaken, Switzerland, September 1-5, 2008. B. W. Williams, C. H. M. Simha, N. Abedrabbo, and M. J. Worswick, R. Mayer, “Effect of Anisotropy, Kinematic Hardening, and Strain-Rate Sensitivity on the Predicted Axial Crush Response of Hydroformed Aluminium Alloy Tubes”, in Int. Conf. on Impact Loading of Lightweight Structures, Trondheim, Norway, June 17-19, 2008. N. Abedrabbo, F. Pourboghrat, “ Warm Forming of Aluminum Alloys” in The 4th Annual American Hydroforming Conference, London, Ontario, Sept. 25-27, 2006. N. Abedrabbo, F. Pourboghrat, “ A Coupled Thermo-Mechanical Anisotropic Finite Element Model For Warm Forming Of AA5182-O And AA5754-O” in The Twelfth International Symposium on Plasticity (PLASTICITY 2006), Halifax, Canada, July 17-22, 2006. Nader Abedrabbo, Farhang Pourboghrat and John Carsley, “Coupled Thermo-Mechanical Simulation of Warm Forming for Aluminum Alloys”, in NUMISHEET2005, Detroit, Michigan , August 15-19, 2005. Nima Salajegheh, Nader Abedrabbo and Farhang Pourboghrat, “Numerical Implementation of an Efficient Algorithm for Continuum Damage Based Elastoplastic Constitutive Equation in Ls-Dyna” in NUMISHEET2005, Detroit, Michigan , August 15-19, 2005. N. Abedrabbo, F. Pourboghrat, “An Experimental and Numerical Study of Warm Forming of Aluminum Alloy Sheets” in The Eleventh International Symposium on Plasticity (PLASTICITY 2005), Kauai, Hawaii, Jan. 4-8, 2005. N. Abedrabbo, F. Pourboghrat and J. Carsley, “Sheet Hydroforming Simulation of a License-Plate-Pocket Panel” in NUMIFORM2004, edited by Somnath Ghosh, Ohio State University, USA (June, 2004). N. Abedrabbo, N. Zafar, R. Averill F. Pourboghrat and R. Sidhu, “Optimization of a Tube Hydroforming Process” in NUMIFORM2004, edited by Somnath Ghosh, Ohio State University, USA (June, 2004). Abedrabbo N., Zampaloni M. and Pourboghrat F., “Numerical Study of Wrinkling Behavior of AL6111-T4 in Stamp Hydroforming” in NUMISHEET2002, edited by Dong-Yal Yang et al., Korea, pp. 331-336 (2002). M. Zampaloni, N. Abedrabbo and F. Pourboghrat “Experimental and Numerical Study of Stamp Hydroforming for Processing Aluminum Parts”, Sixth U.S. National Congress on Computational Mechanics (USACM), Edited by G. M. Hulbert, August 2001.
Planned Journal Papers: Williams, B., Simha, H., Abedrabbo, N., and M. J. Worswick, “Effect of Anisotropy, Kinematic Hardening, and Strain-rate on the Predicted Axial Crush Response of Hydroformed Aluminium Alloy Tubes”, Journal paper to be submitted in 2007. Narasimhan, S., Abedrabbo, N., and M. J. Worswick, “Optimization of laser welded tailor welded tubes for hydroforming application”, Journal paper to be submitted in 2007.
|
