Selected Publications
-
Gas Dynamic Design Analyses of Charging Zone for
Reverse-Flow Pressure Wave Superchargers, P. Akbari, N. Müller, 2003
ASME Spring Technical Conference, Austria, May 2003, to appear.
-
Performance Improvement of Small Gas Turbines Through Use of Wave Rotor
Topping Cycles, P. Akbari, N. Müller, 2003 International ASME/IGTI
Turbo Exposition, U.S.A., Jun 2003, to appear.
-
Performance Investigation of Small Gas Turbine Engines Topped with Wave
Rotors, P. Akbari, N. Müller, 39th AIAA/ASME/SAE/ASEE Joint Propulsion
Conference, U.S.A., Jul 2003, to appear.
-
A Design Procedure for Gas Turbine Topping Reverse-Flow Wave Rotors, Akbari,
P., Müller, N. 2003 International Gas Turbine Congress, Japan, Nov
2003, to appear.
-
Utilizing Wave Rotor Technology to Enhance the Turbo Compression in Power
and Refrigeration Cycles, P. Akbari, A. A. Kharazi, N. Müller, 2003
International Mechanical International Conference, U.S.A., Nov 2002, to
appear.
-
A Numerical Investigation on the Volute/Diffuser
Interaction Due to the Axial Distortion Impeller Exit, A. Engeda, Fahua
Gu, Mike Cave Jean-Luc Di Liberti, PID-Vol. 5, Challenges and Goals Industrial
Compressor, ASME 2000
-
The Influence of Inlet Flow Distortion on the the
Performance of Centrifugal Compressor and the Development of Important
Inlet Using Numericl Simulation, Part1: Experimental Test Comparsion for
Compressor Stage Performance, A. Engeda, Yunbae Kim, Ron Aungier, Greg
Direnzi, PID-Vol. 5, Challenges and Goals Industrial Compressor,
ASME 2000
-
The Influence of Inlet Flow Distortion on the Performance
of Centrifugal Compressor and the Development of Important Inlet
Using Numericl Simulation, Part2: Development of Improved Inlet for A Centrifugal
Compressor Using Numerical Simulation, A. Engeda, Yunbae Kim, Ron Aungier,
Greg Direnzi, PID-Vol. 5, Challenges and Goals Industrial Compressor,
ASME 2000
-
Correlation and Prediction of Efficiency of Centrifugal Pumps due to Tip
Clearance A. Engeda, British Journal for Power and Energy, IMEC, Vol. 209,
1995
-
On Variable Geometry Straight Channel Vaned Diffusers of Centrifugal Compressors,
A. Engeda, ASME Paper 95-WA/PID-3
-
Numerical Flow Prediction of the Diffusion Process in a Radial Vaneless
Diffuser, A. Engeda, Joint ASME/JSME Fluid Engineering Conference: Numerical
Simulation in Turbomachinery, FED-Vol. 227 1995
-
Analyses of the Blade-Blade Pressure Field in a Centrifugal Compressor,
A. Engeda, 31st AIAA/ASME/ASE/ASEE joint Propulsion Conference, Paper AIAA
95-2658, July 10-12, 1995, San Diego
-
Tip Clearance Flow-Effects on Centrifugal Impellers, A. Engeda, ASME/JSME
Fluid Engineering Conference: Complex and Separated Flows, FED-Vol. 217,
1995
-
Flow Phenomena in Low Solidity Vane Diffusers of an Air Package Compressor,
A. Engeda, N.and C. Boal, ASME Paper 95-WA/PID-1
-
On the Design of Cambered Vane Diffusers of Centrifugal Compressors, A.
Engeda, Joint ASME/JSME Fluid Engineering Conference: Fluid Machinery,
FED-Vol 222,1995
-
Prediction of the Effect of Diffuser Width on the Diffusion Process in
a Radial Vaneless Diffuser, A. Engeda, Computational Fluid Dynamics in
Aeropropulsion, ASME-WAM-95, AD-Vol 49
-
Simple Theoretical Analyses of The Diffusion Process in a Radial Vaneless
Diffuser, A. Engeda, ASME/JSME Fluid Engineering Conference: Complex and
Separated Flows, FED-Vol. 217, 1995
Selected Research:
-
Steam Cooled Gas Turbine Blade - Phase II Sponsor: AGTSR-DOE
-
Performance Test of Low Solidity Vaned Diffusers for Centrifugal Compressors
- Phase II Sponsor: Elliott Co.
-
Low Flow Coefficient Centrifugal Compressors Sponsor: Solar Turbine Co.
