Facilities
Rapid Protoyping Lab
Engineering Machine Shop & Industrial Project Lab
Roy Bailff - Machine Shop Manager
5000 sq.ft. Complete Machine Shop - Capacity 0f 49
· Lathes
·
· With separate facilities:
o Industrial Projects Lab
o Baja and Formula team workshop
Engineering Machine Shop & Industrial Project Lab
The Engineering Machine Shop and Industrial Project Lab (IPL) are full services shops that provide the students with the needed tools and equipment to design and manufacture projects.
Everyone using the Engineering Machine Shop and Industrial Projects Lab MUST wear safety glasses and complete the Safety form on line!
Engineering Machine Shop
Michigan State University
B250 Engineering Building
MEshop@egr.msu.edu
355-3521
Engineering Shop
Spring Semester
Shop Spring 2013 Hours:
Monday 8 a.m. - 5:00 p.m.
Tuesday 8 a.m. - 5:00 p.m
Wednesday 8 a.m. - 5:00 p.m.
Thursday 10 a.m. - 5:00 p.m.
Friday 8 a.m. - 3:00 p.m
.
(Hours will change after Spring Break with more evening hours)
Industrial Projects Lab - Safety glasses area.
Room 1252 EB
Hours:
Lab must be kept CLEAN!
Alll are instructed to clean up after using.
Machine Shop Staff
Ken Barlage Patrick Mann III
Matt Bearup Mike Koschmider
STUDENTS MUST HAVE SAFETY GLASSES!!
Design/Manufacturing Center Locations:
Product Design Lab:Room 1240 EB
Design Resource Room:1240a EB
ME Computer Lab: Room 1237 EB
Engineering Machine Shop and IPL Safety Rules:
- Safety glasses with side shields are to be worn at all times while in the machine shop or the IPL. Safety glasses must be worn over prescription glasses. It is the students' responsibility to supply their own safety glasses.
- All students must sign in when entering the machine shop or the IPL and sign out when leaving.
- Students must record all material usage with the shop supervisor.
- Loose fitting clothing that does not protect the body from hot metal chips or falling tools are not permitted. This includes neckties, shorts, tom pants, open toed shoes, etc.
- Only ONE person is to operate a machine at one time. Never leave a machine while it is operating.
- Report all breakage to the shop supervisor so repairs and replacements can be made.
- Reckless behavior will not be tolerated.
- Before leaving the shop or IPL, students must thoroughly clean and wipe down all machines used and return all tools to their proper locations. The floors around the machine are to be completely swept. No tools are to be left out.
- Do not use compressed air to clean metal chips off machines. Particles can be blown into faces and eyes causing injury.
- Above all, use common sense and caution when in any industrial environment.
- Any student not following the above safety rules will be removed from the shop and not be allowed to return.
- Students MUST bring their own safety glasses!
