Kalinath Mukherjee

PUBLICATIONS:

1994

J.M. Yoo and K. Mukherjee, "X-ray Polefigure Analysis of Texturing and Textural Hardening in Mechanical Deformation of Bi1.6Pb0.4Sr2Ca2Cu33O2 Superconductor HIP Cladded on Ag Substrate," Physica C, 22, pp. 241, 1994.

I.S. Oh and K. Mukherjee, "Texture Formation in BSCCO 2212/Ag Composite Tapes: Effect of Cold Rolling and Laser Float Zone Melting Technique," Physica C, 227, pp. 197, 1994.

Guneik Jang, K. Mukherjee, and Hogi Kim, "Manufacture of Yba2Cu3O7-Z Superconductor by Using a Neodymium: Yttrium Alumina Garnet Laser," Journal of Applied Physics, 33(2B), pp. 215, 1994.

G.E. Jang and K. Mukherjee, "Physical and Mechanical Properties of Laser-Calcined and Hot Isostatic Pressing Processed Ag-Fiber-Reinforced Composite," Superconductor Science Technology, 7, pp. 334, 1994.

I.S. Oh, J.M. Yoo, C.W. Chen, and K. Mukherjee, "Laser Assisted Fabrication of Textured High T0 Superconductor," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 57, 1994.

C.W. Chen and K. Mukherjee, "Ag Doped YBa2Cu3O1/Ag Multi-layer Thick Film by Combination of Thermal Vapor Deposition and Ion-Beam Assisted Laser Vapor Deposition," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 103, 1994.

S. Kudapa, J. Ding, M. Tayal and K. Mukherjee, "Laser Machining and Joining of Metal Matrix Composites," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 223, 1994.

J. Howard, D. Stevens and K. Mukherjee, "Laser Machining of Polymeric Composites for Joint Preparation," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 254, 1994.

J.M. Yoo and K. Mukherjee, "Effect of Mechanical Deformation on the Evolution of C-Axis Texture of Bi1.6Pb0.4Sr2CB2Cu3Oz Superconductor HIP Cladded on Ag Substrate," Processing of Long Lengths of Superconductors, edited by U. Balachandran, E.W. Collings, and A. Goyal, TMS Publication, pp. 131-145, 1994.

1993

J.M. Yoo and K. Mukherjee, "The Stability of High Te Phase in Bi1.6Pb0.4Sr2 Ca2Cu3O2 Compounds Prepared by Hot Isostatic Pressing," Journal of Materials Science, 28, p. 2361, 1993.

C.W. Chen and K. Mukherjee, "Review of Progress in Pulsed Laser Deposition and Using Nd:YAG Laser in Processing of High Tc Superconductors," Proceedings of the International Conference on Beam Processing of Advanced Materials, TMS Publication, p. 301, 1993.

C.W. Chen and K. Mukherjee, "Processing of YBa2Cu3Oz Superconductor Thin Film by Pulsed Nd:YAG Laser Vapor Deposition," Proceedings of the First Pacific Rim Conference on Advanced Materials and Processing (PRICM-1), TMS Publication, p. 547, 1993.

1992

K. Mukherjee, A. Herdayat, and J. Rechtien, "Phase Transformation in Carbon Coated Nitinol, with Application to the Design of a Prosthesis for the reconstruction of the Anterior Cruciate Ligament," Journal of Materials Science: Materials in Medicine, 3, p. 65, 1992.

G.T. Burns, J. A. Ewald, and K. Mukherjee, "Hot Press Sintering Studies of Amorphous Silicon Nitride Powders," Journal of Materials Science, 27, p. 3599, 1992.

C.W. Chen, P.A. Khan, and K. Mukherjee, "Laser Fabrication of Pb Doped Bi-Sr-Ca-Cu-O Superconductor," Journal of Materials Science, 27, p. 3221, 1992.

A. Hedayat, J. Rechtien, and K. Mukherjee, "The Effect of Surface Constraint on the Phase Transformation of Nitinol," Journal of Materials Science, 27, p. 5306, 1992.

P.A. Khan, M. Cherif, V. Barnekov, and K. Mukherjee, "High Speed, High Energy Automated Machining of Hardwoods Using a CO2 Laser," Proceedings of ICCLEO '91 Laser Institute of America, Laser Materials Processing, 74, p. 238, 1992.

1990

M. Tayal, P.A.A. Kahan, T.T. Lei, and K. Mukherjee, "Selective Hardening of Medium Carbon Steel with Nd-YAG Laser," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 71, 1990.

P.A.A. Khan, K. Mukherjee, M. Tayal, M. Cherif, and H. Huber, "High Speed Precision Laser Cutting of Hardwoods," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 233, 1990.

K. Mukherjee, P.A.A. Khan, and M. Tayal, "Laser Machining of Composites," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 217, 1990.

K. Mukherjee, G.E. Lang, P.A.A. Kahan, and M. Tayal, "Manufacturing of High-Temperature Superconductors by using a Nd-YAG Laser," Laser Materials Processing III, TMS Publications, p. 159, 1990.

K. Mukherjee and N.B. Dahotre, "Development of Microstructure in Laser Surface Alloying of Steel with Chromium," Journal of Materials Science, 25, p. 445, 1990.

K. Mukherjee, C.S. Lee Pack, O.T. Inal, and Han-ryong Pak, "Crystal Structures and Microstructures of (Ni, Cu) Sn alloys," Journal of Material Science and Engineering, A130, p. 83, 1990.

K. Mukherjee, T. Grandzwell, P.A.A. Khan, and C.W. McMillin, "Gasflow Parameters in Laser Cutting of Wood: Nozzle Design," Forest Products Journal, 40, p. 39, 1990.

1989

J.S. Lee Pak, K. Mukherjee, O.T. Inal and J. Han-ryong Pak, "Phase Transformations in (Ni, Cu) Sn Alloys," Materials Science and Engineering, A117, pp. 167, 1989.

H. Huber, S. Ruddel, K. Mukherjee, and C. McMillan, "The Economics of Cutting Wood Parts, Replacing a Conventional Rough Mill with ALPS," Forest Products Journal, 39, pp. 46 1989.