Eldon D. Case

PUBLICATIONS:

1995

K.Y. Lee and E.D. Case, "Sintering of Alumina Ceramics in a Single-Mode Microwave Cavity Under Automated Control," Ceramic Transactions, 59, 473480, American Ceramic Society, Inc., Columbus, OH, 1995.

K.Y. Lee and E.D. Case, "Effects of Adhesion on Effective Young's Modulus in Glass Slide/Glue Composites," Part I, accepted for publication, Journal of Materials Science, 1995.

K.Y. Lee and E.D. Case, "Effects of Adhesion on Effective Young's Modulus in Glass Slide/Glue Composites," Part II, accepted for publication, Journal of Materials Science, 1995.

K.Y. Lee and E.D. Case, "Binder Burnout in a Controlled Single-Mode Microwave Cavity," accepted for publication, Scripta Metalurgica et Materialia, 1995.

W.S. Kim and E.D. Case, "Comparison of Thermal Fatigue Damage in Unreinforced and Reinforced Alumina Ceramics: Crack Lengths and Macroscopic Properties," Proceedings of 11th Annual Advanced Composites Conference, The Engineering Society, Ann Arbor, MI, 505-516, 1995.

K.Y. Lee and E.D. Case, "Microwave Sintering of Ceramic Matrix Composites and the Effect of Organic Binders on the Sinterability," Proceedings of 11th Annual Advanced Composites Conference, The Engineering Society, Ann Arbor, MI, 491-504, 1995.

1994

C.C. Chiu and E.D. Case, "Surface Oxidation and its Effect on the Observed Elastic Modulus of SiC whisker/alumina composites," Journal of Composites. 28[1]: 2-21, 1994.

1993

Y. Kim, E.D. Case "The Effect of Surface-Limited Microcracks on the Effective Young's Modulus of Ceramics, I. Theory," J. Mater. Sci., 28, 1885-1900, (1993).

Y. Kim, E.D. Case "The Effect of Surface-Limited Microcracks on the Effective Young's Modulus of Ceramics, II. Theory, as Applied to Indentation Crack Systems," J. Mater. Sci., 28, 1901-1909, (1993).

Y. Kim, E.D. Case and Scott Gaynor, "The Effect of Surface-Limited Microcracks on the Effective Young's Modulus of Ceramics, III. Experiment," J. Mater. Sci. 28, 1910-1918, (1993).

Y. Kim, E.D. Caseand W. J. Lee, "Cyclic Thermal Shock in SiC Whisker Reinforced Alumina and in Other Ceramic Systems," Proceedings of the Thermal Shock Behavior and Thermal Fatigue of Advanced Ceramics, G.A. Schneider and G. Petzow, Editors, Kluwer Academic Publishers, the Nederlands, 393-406, (1993).

W. J. Lee, E.D. Case Y. Kim, "The Effect of Quenching Media on the Heat Transfer Coefficient of Polycrystalline Alumina," J. Mater. Sci., 28, 2079-2083, (1993).

B. A. Wilson, E.D. Case "Comparison of Mechanical Fatigue with Thermal Fatigue in Ceramics," Scripta Metallurgica et Materialia, 28, 1571-1576, (1993).

B. A. Wilson, E.D. Case "Low Cycle Mechanical and Thermal Fatigue of Ceramics and Ceramic Composites, with Consideration of Debris Accumulation Effects," Proceedings of the American Society for Composites 8th Technical Conference on Composite Materials, Technomic Publications, Lancaster, PA, 931-940, (1993).

W. H. Glime, J. Mattavi, E.D. Case and D. Reinhard, "Deflection Behavior of Point-loaded CVD Diamond Thin Film Diaphragms," ibid, 921-930, (1993).

K. Lee, E.D. Case "The Dependence of the Effective Young's Modulus of Glass/Epoxy and Glass/Glue Laminates on Adhesion area and glue bond thickness," ibid, 509-518, (1993).

L. E. D. Flowers, R. M. Brown, E.D. Case and D. K. Reinard, "Burst Pressure of Diamond Thin Film Diaphragms as a Function of Film Diameter andThickness," ibid, 911-920, (1993).

1992

Y.M. Kim and E.D. Case, "Time-Dependent Elastic Modulus Recovery Measurement on Thermally Shocked SiC Fiber-Aluminosilicate Composites, Machinable Glass Ceramics, and Polycrystalline Alumina," Journal of Materials Science, 27, pp. 1537-1545, 1992.

1991

C.C. Chiu and E.D. Case, "Elastic Modulus Determination of Coating Layers as Applied to Ceramic Composites," Materials Science and Engineering, A132, pp. 29-47, 1991.

C.A. Gamlen, E.D. Case, D.K. Reinhard, and B. Huang, "Adhesion of Polycrystalline Diamond Thin-Films on Single-Crystal Silicon Substrates," Journal of Applied Physics Letters, 59, pp. 2529-2531, 1991.

Y.M. Kim, W.J. Lee and E.D. Case, "The Measurement of the Surface Heat Transfer Coefficient for Ceramics Quenched into a Water Bath," Materials Science and Engineering, A145, pp. L7-L11, 1991.

1990

Y. Kim, W.J. Lee, and E.D. Case, "Thermal Fatigue Behavior of Ceramic Matrix Composites: A Comparison Among Fiber Reinforced, Whisker Reinforced, Particulate Reinforced, and Monolithic Ceramic," Proceedings of the American Society for Composites, Fifth Technical Conference, pp. 871-881, Technomic Publishing Company, 1990.