1994

R.C. Averill, "Static and Dynamic Response of Moderately Thick Laminated Beams with Damage," Engineering Composites, Vol.4, pp.381-395, 1994.

W.F. Punch, R.C. Averill, E.D. Goodman, S.-C. Lin, Y Ding, and YC. Yip, "Optimal Design of Laminated Composite Structures Using Coarse-Grain Parallel Genetic Algorithms," Third National Symposium on Large-Scale Structural Analysis for High-Performance Computers and Workstations, Norfolk, VA, November 8-11, 1994.

B. Garnier, D. Delaunay and J.V. Beck, "Improved Measurement of Surface Temperature of Composite Materials for the Optimal Estimation of Their Thermal Properties," in Proceedings of the 13th European Conference on Thermophysical Properties, Lisbon, Portugal, August 29-September 3, 1993, pp. 549-557, and High Temperature-High Pressures, vol. 26, 15-23, 1994.

Y. Jiang and G.J. Blanchard, "Rotational Diffusion Dynamics of Perylene in n-Alkanes. Observation of a Solvent Length-Dependent Change of Boundary Condition," Journal of Phys. Chem., 98, pp. 6436-6440, 1994.

Y. Jiang and G.J. Blanchard, "Vibrational Population Relaxation of Perylene in n-Alkanes. The Role of Solvent Local Structure in Long Range Vibrational Energy Transfer," Journal of Phys. Chem., 98, pp. 9411-9416, 1994.

Y. Jiang and G.J. Blanchard, "Vibrational Population Relaxation of Perylene in its Ground and Excited Electronic States," Journal of Phys. Chem., 98, pp. 9417-9421, 1994.

J. P. Rasimas and G.J. Blanchard, "Understanding The Electronic Properties of Glycosylated Chromophores Using AM1 Semiempirical Calculations," Journal of Phys. Chem., 98, pp. 12949-12957, 1994.

D.S. Karpovich and G.J. Blanchard, "Direct Measurement of Adsorption Kinetics of Self-Assembled Monolayer Films on a Microcrystalline Gold Surface," Langmuir, 10, pp. 3315-3322, 1994.

M.M. Awad, P.K. McCarthy, and G.J. Blanchard, "Photoisomerization of Cyanines: A Comparative Study of Oxygen and Sulfur Containing Species," Journal of Phys. Chem., 98, pp. 1454-1458, 1994.

Y. Jiang, P.K. McCarthy, and G.J. Blanchard, "The Role of Multiple Electronic States in the Dissipative Energy Dynamics of Coumarin 153," Chem. Phys., 183, pp. 249-267, 1994.

C.C. Chiu and E.D. Case, "Surface Oxidation and its Effect on the Observed Elastic Modulus of SiC whisker/alumina composites," Journal of Composites. 28[1]: 2-21, 1994.

A.W. Chan and R.J. Morgan, "Computer Modeling of Liquid Composite Molding for 3-dimensional Complex Shaped Structures," Proceedings of 10th ASM/ESD Advanced Composites Conference, Detroit, 341, 1994.

C.W. Chang, K. Chen, and J. Qian, "Non-destructive Measurement of EM Properties of Anisotropic Materials with a Waveguide Probe System," 1994 IEE-APS, URSI International Symposium, University of Washington, 1994.

X.L. Chen and G.L. Cloud, "Simple Nondestructive Screening of Composites Using ESPI and Gravity Loading," Proceedings of 1994 Spring Conference on Experimental Mechanics, Society for Experimental Mechanics, Baltimore, MD, June 1994.

G.L. Cloud, "Trends in Photomechanics: Fashion, Practicality, and Uncommon Applications," Proceedings of Interferometry 1994, mt. Soc. Optical Engineers, Warsaw, Poland, May 1994.

G.L. Cloud and X.L. Chen, "Combined Interferometric Techniques for Assessment of Damage in Composites Structures," Proceedings of ISATA Conference on New and Alternative Materials for the Transportation Industry, Aachen, Germany, October 1994.

D. Sharrott, Y. Zhang, and M.A. Crimp, "Structural Studies of <100>{001} Edge Dislocation Cores in B2 Fe-Al Alloys," Processing, Properties and Applications of Iron Aluminide Intermetallics, J. Schneibel and M.A. Crimp eds., TMS Proceedings, Warrendale PA., 241, 1994.

M.J. Crimp, "A Novel Approach to IMC Processing," Materials Science and Engineering, 1994.

M.J. Crimp and D.A. Oppermann, "Green Density Variations in Relation to Colloidal Packing in SiC/Si3N4 Composites," Proceedings of The Ceramic Matrix Composites Symposium: American Ceramic Society Annual Meeting, 1994.

M.J. Crimp, D.A. Oppermann, M. Zhang, "Improvements in SiCw/Al2O3 Composites Through Colloidally Stabilized Suspensions," Proceedings of The Ceramic Matrix Composites Symposium: American Ceramic Society Annual Meeting, 1994.

M.J. Crimp, J. Ambriz, and B.A. Wilson, "Processing of FeCrAlY/IMCs using Stability Predictions," Processing, Properties and Applications of Iron Aluminides, edited by J.H. Schneibel and M.A. Crimp, pp. 89-97, 1994.

Bendsoe, M. and A.R. Diaz, "Optimization of Material Properties for Improved Frequency Response," Structural Optimization, 7, 138-140, 1994.

Bendsoe, M. and A.R. Diaz, Lipton, R., and Taylor, J. , "On the Prediction of Extremal Material Properties and Optimal Material Distribution for Multiple Loading Conditions," Advances in Design Automation,

Proceedings of the 1994 ASME Design Automation Conference, Minneapolis, Minnesota, September 1994.

Bendsoe, M. and A.R. Diaz, Lipton, R., and Taylor, J. "Optimal Material Design For Minimum Average Compliance," Proceedings of the Third World Congress on Computational Mechanics, Chiba, Japan, August 1994.

Bendsoe, M. and A.R. Diaz, Lipton, R., and Taylor, J., "On the Prediction of Extremal Material Properties for the Optimal Design of Topology, Shape, and Material," Smart Structures and Materials 1994: Mathematics and Control in Smart Structures, Orlando, FL, 1994

A.R. Diaz, "Optimum Configuration of 3-Dimensional Mechanical Components with Geometric Constraints," Proceedings of the 1994 NSF Design and Manufacturing System Conference, Cambridge, MA, January 1994.

N. Dontula, D. Hunt, and G.A. Campbell, "Evaluation of Particle Trajectories in Extruders," Proceedings of 10th Annual PPS Meeting, pp 37-38, Akron, OH, 1994.

N. Dontula, G.A. Campbell, and J.J. Wenskus, "An approach towards molding parts with constant properties on addition of regrind," Proceedings of 52nd ANTEC, pp 3037-3041, San Francisco, CA , 1994.

N. Dontula, N.S.Ramesh, G.A. Campbell, J.D. Small, and A.L. Fricke, "Polymer-Filler Redistribution During Injection Molding," Journal of Reinforced Plastics and Composites, 13, pp 98-105, 1994.

B.L. Erickson, P. Herrera-Franco, and L.T. Drzal, "Microwave Versus Thermal Processing of Metal-Epoxy Adhesive Bonds," Journal of Adhesion, 1994.

B.K. Larson and L.T. Drzal, "Glass Fiber Sixing-Matrix Interphase Formation in Liquid Composite Molding: Effects on Fiber-Matrix Adhesion and Mechanical Properties," Composites, --(6), pp. 1-11, 1994.

L.T. Drzal, "Reinforcement/Resin Interactions During Flow," Workshop report, NIST Workshop on Manufacturing Polymer Composites by Liquid Molding, 1994.

R.K. Agrawal and L.T. Drzal, "Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass," Journal of Adhesion, 1994.

L.T. Drzal, S. Padaki, M. Vyakarnam, and J. Fernandes, "Powder Impregnation of Polymer Composite Materials," Chapter in Polymer Powder Technology, edited by M. Narkis and N. Rosenzweig, J. Wiley & Sons, Ltd,. 1994.

C. Dunn, E.J. Fouch, and R.J. Morgan, AFrugal Testing for Auto and Aero Industries: A Novel Approach to Data Resourcing, Proceedings of SEM Meeting, Baltimore, MD, p. 382, June 1994.

S.E. Selke and J.R. Giacin, "Degradable Plastics. M Booma, Journal of Elastomers & Plastics, 26(2):104, 1994.

T.J. Nielsen and J.R. Giacin, "The Sorption of Limonene/Ethyl Acetate Binary Vapour Mixtures by a Biaxially Oriented Polypropylene Film," Packaging Technology & Science, 7:247-258,1994.

J.R. Giacin, "Mass Transfer of 3,5-di-Tertiary-ButyI 4-Hydroxy Toluene (BHT) from a Multi-layer Lamination," Proceedings of the TAPPI 1994 Polymers, Laminations & Coatings Conference, August 28 - September 1, Opryland Hotel, Nashville, TN, 1994.

R. Gavara, M.G. Kontominas, and J.R. Giacin, "Gas-Solid Chromatographic Study of Polymer Surfaces: Adsorption on Polystyrene," European Polymer Journal, 30(2), p. 271, 1994.

R. Gavara, M.G. Kontominas, and J.R. Giacin, "The Adsorption of Hydrocarbons on Polystyrene by Inverse Gas Chromatography: Infinite Dilution Concentration Region," European Polymer Journal, 30(2), p.265, 1994.

R.J. Hernandez and R. Gavara, "Sorption and Transport of Water in Nylon 6 Films," Journal of Polymer Science, Part B: Polymer Physics, 32, pp. 2367-2374, 1994.

R. Gavara and R.J. Hernandez, "The Effect of Water in the Mass Transport of Oxygen in Nylon 6 Films," Journal of Polymer Science, Part B: Polymer Physics, 32, pp. 2375-2382, 1994.

R.J. Hernandez, "Effect of Water Vapor on the Transport Properties of Oxygen through Polyamides Packaging Materials," Journal of Food Engineering, 22, pp. 495-507, 1994.

I. Jasiuk, J. Chen, and M.A. Thorpe, "Elastic Moduli of Two Dimensional Materials with Polygonal Holes," Applied Mechanics Reviews, 47(1:2), pp. S18-S28, 1994.

M. Ostoja-Starzewski, P.Y. Sheng, and I. Jasiuk, "Effects of Random Geometry on Effective Properties and Damage Formation in 2-D Composites," ASME Journal of Engineering Materials and Technology, 116, pp. 384-391, 1994.

R. Polance, K.L. Nichols, and K. Jayaraman, "Micelle growth and clustering in blends of polystyrene and styrene-butadiene diblock copolymer," Polymer, 35, (23), 5051-5056, 1994.

MacKinnon, C.G. and M.M. Koochesfahani, "Effects of 2-D and 3-D disturbances on mixing in a shear layer," Bull Am. Phys. Soc., 39(9), 1846, 1994.

M.M. Koochesfahani, Beresh, S. J. and MacKinnon, C. G., "Volumetric visualization of 3-D flow structure in a low Reynolds number forced wake," Bull. Am. Phys. Soc., 39(9), 1947, 1994.

Gendrich, C.P., M.M. Koochesfahani and Nocera, D. G., "Analysis of molecular tagging velocimetry images for obtaining simultaneous multi-point velocity vectors," Bull Am. Phys. Soc., 39(9), 1980, 1994.

F.J. Hamady, J.R. Lloyd, K.T. Yang, and H.Q. Yang, "A Study of Natural Convection in a Rotating Enclosure," ASME Journal of Heat Transfer, 116(1), pp. 136-143, 1994.

J.R. Lloyd and C. Zhang, "A Discussion on the Use of Electrorheological Fluids in the Active Control of Heat Transfer Processes," Heat and Mass Transfer, edited by A.R. Balakrishnan and S. Srinivasa Murthy Tata, McGraw-Hill Publishing Company Limited, First ISHMT-ASME Heat and Mass Transfer Conference, pp. 67-78, 1994.

M.D. Kelleher, R. Egger, Y. Joshi, and J.R. Lloyd, "Modification of the Nucleate Boiling Hysteresis in the Pool Boiling of Fluorocarbons," Proceedings of the 10th International Heat Transfer Conference, edited by G.F. Hewitt, pp. 87-92, 1994.

J. Zhou and J.P. Lucas, "Characteristics of Water in a Graphite/Epoxy Composite," Proceedings for the 9th Technical Conference in Composites Materials, American Society for Composites, p. 1213, 1994.

B. Lian, J. Ladewig, J.M. Wille and J.J. McGrath, "Three Dimensional Orientation Distributions in Injection-Molded, Short Fiber-Reinforced Thermoplastics," Proceedings of ANTEC '94, pp. 2316-2320, 1994.

J.J. McGrath and J.W. Wille, "Determination of 3-D Fiber Orientation Distribution in Thermoplastic Injection Molding," Proceedings of the 1st International Specialist Meeting: Mesostructures and Mesomechanics in Fiber Composites, edited by M.R. Piggott, pp. 15-31, 1994.

R.J. Morgan, E. Shin, C. Dunn, E. Fouch, R.J. Jurek and A. Jurek, "The Durability of Composites for Potential High Speed Civil Transport Applications," Proceedings of SAMPE Meeting, Anaheim, CA, 39 (1), 1564-1575, 1994.

A.W. Chan and R.J. Morgan, AComputer Modeling of Liquid Composite Molding for 3-Dimensional Complex Shaped Structures , Proceedings 10th Annual ASM/ESD Conference, Dearborn, MI, 341-345, 1994.

E. Shin, C. Dunn and R.J. Morgan, APerformance Evaluation of Glass Fiber -Epoxy Composites for Durable Goods Applications , Proceedings 10th Annual ASM/ESD Conference, Dearborn, MI, 545-554, 1994.

C.M.R. Dunn, E.J. Fouch and R.J. Morgan, AFrugal Testing for Auto and Aero Industries: A Novel Approach to Data Resourcing , Proceedings of 1994 SEM Spring Conference, Baltimore, ME, 382-391, June 1994.

J.M. Yoo and K. Mukherjee, "X-ray Polefigure Analysis of Texturing and Textural Hardening in Mechanical Deformation of Bi1.6Pb0.4Sr2Ca2Cu33O2 Superconductor HIP Cladded on Ag Substrate," Physica C, 22, pp. 241, 1994.

I.S. Oh and K. Mukherjee, "Texture Formation in BSCCO 2212/Ag Composite Tapes: Effect of Cold Rolling and Laser Float Zone Melting Technique," Physica C, 227, pp. 197, 1994.

Guneik Jang, K. Mukherjee, and Hogi Kim, "Manufacture of Yba2Cu3O7-Z Superconductor by Using a Neodymium: Yttrium Alumina Garnet Laser," Journal of Applied Physics, 33(2B), pp. 215, 1994.

G.E. Jang and K. Mukherjee, "Physical and Mechanical Properties of Laser-Calcined and Hot Isostatic Pressing Processed Ag-Fiber-Reinforced Composite," Superconductor Science Technology, 7, pp. 334, 1994.

I.S. Oh, J.M. Yoo, C.W. Chen, and K. Mukherjee, "Laser Assisted Fabrication of Textured High T0 Superconductor," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 57, 1994.

C.W. Chen and K. Mukherjee, "Ag Doped YBa2Cu3O1/Ag Multi-layer Thick Film by Combination of Thermal Vapor Deposition and Ion-Beam Assisted Laser Vapor Deposition," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 103, 1994.

S. Kudapa, J. Ding, M. Tayal and K. Mukherjee, "Laser Machining and Joining of Metal Matrix Composites," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 223, 1994.

J. Howard, D. Stevens and K. Mukherjee, "Laser Machining of Polymeric Composites for Joint Preparation," Laser Materials Processing IV, edited by J. Mazumder, K. Mukherjee, and B.L. Mordike, TMS Publication, p. 254, 1994.

J.M. Yoo and K. Mukherjee, "Effect of Mechanical Deformation on the Evolution of C-Axis Texture of Bi1.6Pb0.4Sr2CB2Cu3Oz Superconductor HIP Cladded on Ag Substrate," Processing of Long Lengths of Superconductors, edited by U. Balachandran, E.W. Collings, and A. Goyal, TMS Publication, pp. 131-145, 1994.

Li Nie, and R. Narayan, "Upper limit of grafting reaction and phase homogeneity:cellulose acetate-poly (styrene-co-maleic anhydride) grafting system", Polymer, 35, 4334, 1994.

Li Nie, and R. Narayan, "Grafting cellulose acetate with poly(styrene-co-maleic anhydride) for improved dimensional stability of cellulose acetate", Journal of Applied Polymer Solids, 54, 601, 1994.

R. Narayan, "Polymenc Materials from Agricultural Feedstocks", In Polymers from Agricultural Coproducts, Ed., M.L. Fishman, R.B. Friedman, and S.J. Huang, American Chemical Society Symposium Series, 575, 2, 1994.

R. Narayan, "Impact of Governmental Policies, Regulations, and Standards Activities on an Emerging Biodegradable Plastics Industry", Biodegradable Plastics and Polymers, Eds., Y. Doi & K. Fukuda, Elsevier, New York, pg. 261, 1994.

Bloembergen, J. David, D. Geyer, A. Gustafson, J. Snook, and R. Narayan, "Biodegradation And Composting Studies of Polymeric Materials, In Biodegradable", Plastics and Polymers, Eds., Y. Doi & K. Fukuda, Elsevier, New York, pg. 601, 1994.

Snook and R. Narayan, "The Role of Biodegradable Materials in Solid Waste Management", Waste Management & Recycling International, Sterling Publications Ltd., London, pg.40, -- Invited article, 1994

M. Ostoja-Starzewski, "Micromechanics as a Basis of Continuum Random Fields," Applied Mechanics Reviews (Special Issue: Micromechanics of Random Media), 47(1 Pt. 2), pp. S221-S230, 1994.

M. Ostoja-Starzewski, P.Y. Sheng and I. Jasiuk, "Influence of Random Geometry on Effective Properties and Damage Formation in 2-D Composites," ASME Journal of Engineering Materials and Technology, 116, pp. 384-391, 1994.

M. Ostoja-Starzewski, "Models: Micro-Macro, PROBAMAT - Probabilities and Materials: Tests, Models, and Applications," Proceedings of a NATO Advanced Research Workshop Series 930521, 1994.

I. Jasiuk and M. Ostoja-Starzewski, "The Interface Problem: Random Microstructure and Mesocontinuum Model," Control of Interfaces in Metal and Ceramic Composites, edited by R. Lin and S.G. Fishman, pp. 317-325, 1994.

T.J. Pence, D.S. Grummon and Y. Ivshin, ?A Macroscopoic Model for Thermoelastic Hysteresis in Shape-memory Materials, Mechanics of Phase Transformations and Shape-Memory Alloys (L.C. Brinson and B. Moran, eds.)," ASME Proceedings Series: AMD 189, pp. 45-58, 1994.

Y. Ivshin and T.J. Pence, "A Constitutive Model for Hysteretic Phase Transition Behavior," International Journal of Engineering Science, 32, pp. 681-704, 1994.

Y. Ivshin and T.J. Pence, "Building Proper Behavior into Mathematical Models for Shape Memory Alloys, Mathematical and Control in Smart Structures, SPIE, 2192, pp. 94-105, 1994.

Y. Qui, S. Kim, and T.J. Pence "Plane Strain Buckling and Wrinkling of neo-Hookean Laminates," Int. Journal of Solids Structures, 31, pp. 1149-1178, 1994.

Y. Ivshin and T.J. Pence, "A Thermomechanical Model for a One Variant Shape Memory Material," Journal of Intell. Mater. Syst. and Struct., 5, pp. 455-473, 1994.

T. Lan, P.D. Kaviratna, and T.J. Pinnavia, "Synthesis, Chacterization, and C02 Permeability of Polyimide-Clay Composites," ACS Polymer Preprints, 35, 823, 1994.

T. Lan, P.D. Kaviratna, and T.J. Pinnavia, "On the Nature of Polyimide-Clay Composites," Chem. Materials, 6, 573, 1994.

P.D. Kavirathna, T. Lan., and T.J. Pinnavia, "Synthesis and Characterization of Polyether-CIay anocomposites," Proceedings of NOB CChE 1994, 21,275, 1994.

M. Wang and T.J. Pinnavia, "Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin," Chem. Materials, 6, 468, 1994.

T. Lan, P.D. Kavirathna, and T.J. Pinnavia, "Synthesis, Characterization and Mechanical Properties of Epoxy- Clay Nanocomposites," Polymer Materials Science Engineering, , 71, 527, 1994.

T.J. Pinnavia, T. Lan, and M.S. Wang, "Clay-Polymer Nanocomposites: Polyimide and Polyether Systems," Materials Research Society Proceedings, 346, 81, 1994.

E.W. Nelson, T.P. Carter, and A.B. Scranton, "Fluorescence Monitoring of Cationic Photopolymerizations: Divinyl Ethers Photosensitized by Anthracene Derivitives," Macromolecules, 27, p. 1013, 1994.

J.L. Jacobs, E. W. Nelson, and A.B. Scranton, "Use of Fluorescence to Monitor Temperature and Observe Water Effects in Cationic Photopolymerizations of Divinyl Ethers," Polymer Materials Science and Engineering, 70, p. 74, 1994.

A.B. Kidney and A.B. Scranton, "Formation and Structure of Crosslinked Polyacrylates: A Discussion of Methods for Modeling Network Formation," Advances in Superabsorbent Polymers, edited by A.N. Peppas and F.L. Buchholz, ACS Symposium Series, American Chemical Society, 1994.

E.W. Nelson, T.P. Carter, and A.B. Scranton, "The Role of the Triplet State in the Photosensitization of Cationic Polymerizations by Anthracene," Journal of Polymeric Science , Polymeric Chemical, 1994.

E.W. Nelson, T.P. Carter and A.B. Scranton, "Fluorescence Monitoring of Cationic Photopolymerizations: Divinyl Ethers Photosensitized by Anthracene Derivatives," Macromolecules, 27, p. 1013 1994.

J.L. Jacobs, E.W. Nelson, and A.B. Scranton, "Use of Fluorescence to Monitor Temperature and Observe Water Effects in Cationic Photopolymerizations of Divinyl Ethers," Polymer Materials Science and Engineering., 70, p. 74, 1994.

A.B. Kinney and A.B. Scranton, "Formation and Structure of Crosslinked Polyacrylates: Methods for Modeling Network Formation," in Advances in Superabsorbent Polymers, edited by N.A. Peppas and F. L. Buchholz, ACS Symposium Series 573, American Chemical Society, Washington, p. 1, 1994.

M. Booma, S.E. Selke, and J.R. Giacin, "Biodegradable Plastics," Journal of Elastomers and Plastics, 26, pp. 104-142, 1994.

S.E. Selke and B. Saputo, "SWIPES - Solid Waste Integrated Package Evaluation System," Environmentally Responsible Food Processing, edited by K. Niranjan, M. Okos, and M. Rankowitz, AIChE Symposium Series 90(300), pp. 106-109, 1994.

S.E. Selke, "Packaging Options," Food Industry and the Environment, Blackie, edited by J. Dalzell, pp. 283-317, 1994.

I. Wichman, A. Oladipo, I. Hermann, S.E. Selke, "The Influence of Moisture on Fiber/Matrix Adhesion for Wood/HDPE Composites," Advanced Composites Technology, Proceedings of the 9th Annual ASM/ESD Advanced Composites Conference, ESD, pp. 265-276, 1994.

S.E. Selke, "Recycling of Packaging Materials," Recycling of Municipal Solid Wastes, CRC Press, Inc., 1994.

S.E. Selke, Packaging and the Environment: Alternatives, Trends and Solutions, Revised Edition, Technomic Publishing Co., Inc., 1994.

R.J. Morgan, E.E. Shin, C.M.R. Dunn, E.J. Fouch, R.J. Jurek, and A. Jurek, "The Durability of Composites for Potential High Speed Civil Transport Applications," Proceedings of 39th International SAMPE Symposium and Exhibition, Anaheim, California, p1564, April 11, 1994.

E.E. Shin, C. Dunn, and R.J. Morgan, "Performance Evaluation of Glass Fiber-Epoxy Composites for Durable Goods Application," Proceedings of the 10th Annual ASM/ESD Advanced Composite Conference, p545, Dearbone, MI, 7-10 November, 1994.

P. Soroushian, AIhozairny, A. and Eldarwish, A., "Mechanical Properties of Lightweight Concrete Incorporating Reycled Synthetic Wastes," Transportation Research Record No.1458, Transportation Research Board, National Research Council, pp.80-84, 1994.

Marikunte, S. and P. Soroushian, "Long-Term Durability of Cellulose Fiber Cement Composites," ACI Materials Journal, V.91, No.6, pp.605-614, November-December 1994.

P. Soroushian, Shah, Z., Won, J. and Hsu, J., "Durability and Moisture Sensitivity of Recycled Wastepaper-Fiber-Cement Composites," Cement and Concrete Composites, V.16, No.2, pp. 115-128, 1994.

P. Soroushian, Marikunte, S. and Won, J., "Wood Fiber Reinforced Cement Composites Under Wetting-Drying and Freezing-Thawing Cycles," ASCE Materials Journal, V.9, No.4, pp.595-611, November 1994.

P. Soroushian, F. Mirza, and A. Alhozaimy, "Bonding of Confined Steel Fiber Reinforced Concrete to Deformed Bars," ACI Materials Journal, 91(2), pp. 141-149, 1994.

P. Soroushian, J. Hsu, and J. Won, "Recycling of Paper and Plastics for the Reinforcement of Cement-Based Materials," Proceedings of The National Science Foundation/University of Sheffield Workshop on Fiber Reinforced Cement and Concrete, edited by R.N. Swamy and V. Ramakrishnan, pp. 38-45, 1994.

P. Soroushian, Z. Shah, and S. Marikunte, "Reinforcement of Thin Cement Products with Wastepaper Fibers," Thin Reinforced Concrete Products and Systems, edited by P. Balaguru, Publication SP-146, American Concrete Institute, pp. 25-42, 1994.

S. Marikunte and P. Soroushian, "Durability Characteristics of Cellulose Fiber Reinforced Cement Composites," Fiber Reinforced Concrete Developments and Innovations, edited by J.I. Daniel and A.P. Shah, Publication SP-142, American Concrete Institute, pp. 73-89, 1994.

C.Y. Lee, S.B. Choi, B.S. Thompson, and M.V. Gandhi, "A Variational Formulation for the Finite Element Analysis and Control of Linkage and Robotic Systems featuring Smart Structural Members incorporating piezoelectric Materials," Journal of Applied Mechanisms and Robotics, Vol. 1, No. 3, pp. 1-16, 1994.

Cara L. Weitzsacker, Michael Bellamy, and Peter M. A. Sherwood, "Studies of the Effect of Size on Carbon Fiber Surfaces," Journal of Vacuum Science and Technology, 12(4), 2392-2397, July/August 1994.

Q. Zheng and R.J. Morgan, "Structure-Property Relations of Gel-spun Polyvinyl Alcohol (PVA) Fibers," MRS 1994 Fall Meeting in Boston, 1994

Q. Zheng, "New Industrial Uses, New Market for U.S. Crops," Science (Chinese), invited review article, vol.4, 56, 1994.

R.J. Morgan, E. Shin, and Q. Zheng, "The Durability of Composites for Potential High Speed Civil Transport Applications," Proceedings of 39th International SAMPE Meeting, Anaheim, CA, 39(1), 1564-1575, 1994.