N. Liu and N.J. Altiero, "An Integral Equation Method Applied to Mode III Crack Problems," Engineering Fracture Mechanics, 41, pp. 587-596, 1992.

N. Liu and N.J. Altiero, "A New Boundary Element Method for the Solution of Steady-State Thermoelastic Fracture Mechanics Problems," Applied Mathematical Modelling, 16, pp. 618-629, 1992.

A.K. Srivastava, M. Dahimene, T. Grotjohn, and J. Asmussen, "Experimental Characterization at a Compact ECR Ion Source," Review of Science Instruments, 63, pp. 2556-2558, 1992.

G. King, D. Sze, P. Mak, T. Grotjohn, and J. Asmussen, "Ion and Neutral Energies in a Multipolar ECR Plasma Source," Journal of Vacuum Science and Technology, A10, pp. 1265-1269, 1992.

P. Mak, G. King, T. Grotjohn, and J. Asmussen, "Investigation of the Influence of Electromagnetic Excitation on ECR Discharge Properties," Journal of Vacuum Science and Technology, A10, pp. 1281-1287, 1992.

A. Atreya and K. Mekki, "Heat Transfer during Wind-Aided Flame Spread in a Ceiling Mounted Sample," Accepted for presentation in The Twenty-Fourth (International) Symposium on Combustion, Australia, July 1992, to be published in the Symposium volume.

S. Agrawal and A. Atreya, "Wind-Aided Flame Spread over an Unsteadily Vaporizing Solid," accepted for presentation at The Twenty-Fourth (International) Symposium on Combustion, July 1992, to be published in the Symposium volume.

C. Zhang, A. Atreya, and K. Lee, "Sooting Structure of Methane Counterflow Diffusion Flames with Preheated Reactants and Dilution by Products of Combustion," accepted for presentation in The Twenty-Fourth (International) Symposium on Combustion, Australia, July 1992, to be published in the Symposium volume.

R.C. Averill and J.N. Reddy, "An Assessment of Four-Noded Plate Finite Elements Based on a Generalized Third-Order Theory," International Journal for Numerical Methods in Engineering, Vol.33, pp.1553-1572, 1992.

M.H. Loh and J.V. Beck, "Simultaneous Estimation of Two Thermal Conductivity Components from Transient Two-Dimensional Experiments," ASME Winter Annual Meeting, p. 91-WA-HT-11, 1992.

B. Garnier, D. Delaunay, and J.V. Beck, "Estimation of Thermal Properties of Composite Materials without Instrumentation Inside the Specimen," International Journal of Thermophysics, 13, pp. 1097-1111, 1992.

E.P. Scott and J.V. Beck, "Estimation of Thermal Properties in Carbon/Epoxy Matrix Materials During Curing," Journal of Composite Materials, 26, pp. 21-36, 1992.

E.P. Scott and J.V. Beck, "Estimation of Thermal Properties in Epoxy Matrix/Carbon Fiber Composite Materials," Journal of Composite Materials, 26, pp. 132-149, 1992.

T.R. Bieler and K. Mukherjee, "The High Strain Rate Superplastic Deformation Mechanisms of Mechanically Alloyed Aluminum IN90211," Materials Science and Engineering, in press.

T.R. Bieler, G.R. Goto and K. Mukherjee, "Cavitation of Mechanically Alloyed Aluminum at High Homologous Temperatures," Journal of Materials Science, in press.

T.R. Bieler, J.D. Whittenberger, R.D. Noebe, and M.J. Luton, "Extrusion Textures in NiAl-AlN Composites," Intermetallic Matrix Composites II, edited by D.B. Miracle, D.L. Anton, J.A. Graves, MRS Symposium Proceedings, 273, pp. 165-170, 1992.

T.R. Bieler and K. Mukherjee, "The Role of Adiabatic Heating on High Rate Superplastic Elongation," Scripta Metallurgica, in press.

C.C. Chiu and E.D. Case, "Prediction of a Thermal Shock Damage Map for Ceramics," Journal of Materials Science, 27:1553-1559, 1992.

C.C. Chiu and E.D. Case, "Influence of Quenching on Fracture Strength, Elastic Modulus, and Internal Friction of Glass Plates," Journal of Materials Science, 27:2353-2362, 1992.

C.C. Chiu and E.D. Case, "Computer Simulation of Quench-Induced Strength Degradation in Glass Plates," Materials Science and Engineering A154: 207-213, 1992.

W.J. Lee and E.D. Case, "Comparison of Saturation Behavior of Thermal Shock Damage for a Variety of Brittle Materials," Materials Science and Engineering A154: 1-9, 1992.

E.D. Case, Y. Kim, and W.J. Lee, "Thermal Fatigue of Ceramics and Ceramic Composites," 24th International SAMPE Technical Conference, Society for the Advancement of Material and Process Engineering, Covina, CA: 1123-1136, 1992.

C.C. Chiu and E.D. Case, "Statistical Study of the Effect of Subcritical Crack Growth on Thermal Shock Resistance," Journal of Materials Science, 27: 6707-6714, 1992.

E.D. Case, "Thermal Fatigue in Ceramics," Proceedings of the 1995 SEM Spring Conference on Experimental Mechanics, Society for Experimental Mechanics, Inc., Bethel, CN, 264-271, 1995.

Y.M. Kim and E.D. Case, "Time-Dependent Elastic Modulus Recovery Measurement on Thermally Shocked SiC Fiber-Aluminosilicate Composites, Machinable Glass Ceramics, and Polycrystalline Alumina," Journal of Materials Science, 27, pp. 1537-1545, 1992.

A.W. Chan and S.T. Hwang, "Modeling non-isothermal impregnation of fibrous media with reactive polymer resin," Polymer Composites, 32, 310, 1992.

A.W. Chan and S.T. Hwang, "Modeling non-isothermal impregnation of fabric media with reactive polymer resin," Proceedings of First International Conference on Transport Phenomena in Processing, Honolulu, March 22-26, 1992.

A.W. Chan and S.T. Hwang, "Modeling Resin Transfer Molding of Axisymmetric Composite Parts," Journal of Materials Processing & Manufacturing Science, 1, 105, 1992.

A.W. Chan and R.J. Morgan, "Modeling Preform Impregnation and Void Formation in Resin Transfer Molding of Uni-Directional Composites," SAMPE Quarterly, 23, 48, 1992.

A.W. Chan and R.J. Morgan, "Study on Sequential Multiple Port Injection for Resin Transfer Molding of Polymer Composites," SAMPE Quarterly, 24, 45, 1992.

A.W. Chan and R.J. Morgan, "Resin Impregnation and Void Formation in Enhanced Resin Transfer Molding Scheme," Proceedings 8th ASM/ESD Advanced Composites Conference (Chicago), 69, 1992.

C.L. Li and K. Chen, "Complex Waves Excited by an Open-ended Coaxial Probe in Layered Media," presented at Joint Symposium of IEEE-APS, URSI and NEM Meetings, July 18-25, 1992.

C.L. Li and K. Chen, "Coaxial Cavity Method for Measurement of EM Properties of Materials," presented at Joint Symposium of IEEE-APS, URSI and NEM Meetings, July 18-25, 1992.

G.L. Cloud and P. Herrera-Franco, "Strain-Relief Inserts for Composites Fasteners - An Experimental Study," Journal of Composite Materials, 26(5), pp. 751-758, 1992.

G.L. Cloud and James Nokes, "The Application of High Frequency Dynamic Information in the Evaluation of Damage on Fiber Reinforced Composites," Proceedings of the SEM VII International Congress on Experimental Mechanics, Society for Experimental Mechanics, June 1992.

J.J. Stout and M.A. Crimp, "Abnormal Grain Growth in Textured FeA Intermetallics," Materials Science and Engineering, A152, p. 335-340, 1992.

N. Dontula, S.V. Babu, and D.H. Rasmussen, "Laser Induced Deposition of Copper and Lead Powders," Journal of Materials Research, 7, pp1104-1114, 1992.

M. Madhukar and L.T. Drzal, "Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. III. Longitudinal (0o) Compressive Properties of Graphite/Epoxy Composites," Journal of Composite Materials, 26, pp. 310-333, 1992.

M. Madhukar and L.T. Drzal, "Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. IV. Mode I and Mode II Fracture Toughness of Graphite/Epoxy Composites," Journal of Composite Materials, 26, pp. 936-968, 1992.

V. Rao and L.T. Drzal, "The Temperature Dependence of Interfacial Shear Strength for Various Polymeric Matrices Reinforced with Carbon Fibers," Journal of Adhesion, 37, pp. 83-95, 1992.

P. Herrera-Franco and L.T. Drzal, "Comparison of Methods for the Measurement of Fiber-Matrix Adhesion in Composites," Composites, 23, pp. 2-27, 1992.

P. Herrera-Franco, V. Rao, L.T. Drzal, and M.Y.M. Chang, "Bond Strength Measurement in Composites Analysis of Experimental Techniques," Composites Engineering, 2, pp. 31-45, 1992.

G. Fisher and L.T. Drzal, "Adhesion of Carbon Fibers to Poly Phenylene Sulfide Polymers," Proceedings of ANTEC '92, pp. 775-778, 1992.

P. Herrera-Franco, M. Chang, and L.T. Drzal, "The Microbond Technique for Measurement of Fiber-Matrix Interfacial Shear Strength -A Theoretical Analysis," Proceedings of ANTEC '92, pp. 234-242, 1992.

B.K. Larson and L.T. Drzal, "Wetting and Spreading in a Liquid Composite Molding Environment," Proceedings of ANTEC '92, pp. 752-755, 1992.

S. Padaki and L.T. Drzal, "Investigation of the Effect of Particle Size on Powder Prepregging of Composite Materials," Proceedings of ANTEC '92, pp. 1177-1180, 1992.

H. Al-Moussawi and L.T. Drzal, "The Role of Interphase in the SEM Examination of Particulate Composites," American Society for Composites, Proceedings of the 7th Technical Meeting, pp. 876-885, 1992.

P. Herrera-Franco, G. Glaser, and L.T. Drzal, "Interfacial Shear Strength Measurements in Composites Using the Microindentation Technique," American Society for Composites, Proceedings of the 7th Technical Meeting, pp. 837-845, 1992.

B.K. Larson and L.T. Drzal, "Interphase Development in a Liquid Composite Molding Environment," American Society for Composites, Proceedings of the 7th Technical Meeting, pp. 286-293, 1992.

B.K. Larson and L.T. Drzal, "Interphase Formation in a Liquid Composite Molding Environment," 4th International Conference on Composite Interfaces, 1992.

G. Fisher and L.T. Drzal, "The Effect of Surface Chemistry on Adhesion of Carbon Fibers to a Polyphenylene Sulfide (PPS) Resin," 4th International Conference on Composite Interfaces, 1992.

C.L. Foiles, H-K. Sung, R. Loloee, and V. Shull, "In-Plane Texture in Fe/Cr Multilayers," Bulletin APS, 37, p. 405, 1992.

C.L. Foiles, "In-Plane Structure and Properties of Fe Multilayers," Metal. Trans., 23A, p. 1105, 1992.

H-K. Sung, C.L. Foiles, "Magnetization of Sputtered Fe/Cr Multilayers," Philos. Mag., B65, p. 1235, 1992.

M.V. Gandhi, B.S. Thompson, S.R. Kasiviswanathan, and S.B. Choi, "A Collage of Experimental Investigations of Smart Fibrous Composite Structures and Mechanical Systems Featuring Electro-Rheological Fluids, Piezoelectric Materials and Fiber Optic Sensors," Composite Engineering, 2(5-7), pp. 561-571, 1992.

R.J. Hernandez, J.R. Giacin, and E. A. Grulke, "The Sorption of Water Vapor by An Amorphous Polyamide, Journal of Membrane Science," 65, pp. 187-199, 1992.

R. Schalek, M. Hlavacek, and D.S. Grummon, "Low-Energy Ar+ Implantation of UHMW-PE Fibers: Effect on Surface Energy, Surface Chemistry, and Adhesion Characteristics,"Proceedings of Mat. Res. Soc., 236, pp. 335-340, 1992.

R.S. Harichandran and A. Hawwari, "Non-linear Random Vibration of Filamentary Composites," Computing Systems in Engineering, 3(1-4), 469I475, 1992.

V. Adegbite, M.C. Hawley, D. Decker, and J. Sticklen, "Automation of Microwave Processing of Graphite/Epoxy Composite Materials Using an Expert System Technique," MRS Symp. Proc., 269, p.425, 1992.

Y. Chang, J. Wei, and M.C. Hawley, "Dyadic Green Function for Loaded Microwave Cavity," Proceedings of ANTEC=92, p.1610, 1992.

R. Dhulipala, S. Travis, and M.C. Hawley, "Microwave Processing of Glass Fiber/Vinyl Ester-Vinyl Toluene Composites," MRS Symposium Proceedings, 269, p.431, 1992.

L.A. Fellows and M.C. Hawley, "Experimental Design and Preliminary Results of Microwave Heating of Complex Shapes by Mode-switching Techniques," Proceedings of 37th International SAMPE Symposium and Exhibition, p. 914, 1992.

L.A. Fellows, S. Travis, and M.C. Hawley, "Comparison of Microwave Heating of Complex-Shaped Composites Reinforced with Conductive and Non-Conductive Fibers," MRS Symposium Proceedings, 269, p.415, 1992.

L.A. Fellows, J. Wei, and M.C. Hawley, "Microwave Heating of Composites," PPS Regional Meeting for the Americas, 1992.

J.K. McDowell, J. Sticklen and M.C. Hawley, "Integrated Design and Manufacturing for Composite Materials: Knowledge-based Systems and Product Data Exchange Standards" In D.D. Goldsein (Ed.), AIAAI/SIGMAN Workshop on Intelligent Manufacturing Technology, 1992.

J. Sticklen, A. Kamel. M.C. Hawley, and V. Adegbite, "Fabricating Composite Materials: A Comprehensive Problem Solving Architecture Based on a Generic Task Viewpoint," IEEE Expert, 7(2), pp. 43-53, 1992.

J. Wei and M.C. Hawley, "Modeling and Controlling During Microwave and Thermal Processing of Composites," MRS Symposium Proceedings, 269, p. 439, 1992.

J. Wei, B. Thomas, and M.C. Hawley, "Preliminary Experiments for Continuous Processing of Graphite Fiber/Epoxy Tape in a Microwave Applicator," Proceedings of ANTEC=92, p. 1170, 1992.

R.J. Hernandez, J.R. Giacin, E.A. Grulke, "The Sorption of Water Vapor by an Amorphous Polyamide," Journal of Membrane Science, 65, pp. 187-199, 1992.

A.J. Jain and M. Dubuisson, "Segmentation of X-ray and C-scan Images of Fiber Reinforced Composite Materials," Pattern, Recognition Journal, 25(3), pp. 257-270, 1992.

I. Jasiuk, J.Chen, and M.F. Thorpe, "Elastic Moduli of Composites with Rigid Sliding Inclusions," Journal of the Mechanics and Physics of Solids, 40, pp. 373-391, 1992.

M. Lee, I. Jasiuk, and E. Tsuchida, "The Sliding Circular Inclusion in an Elastic Half-Plane," ASME Journal of Applied Mechanics, 59, pp. 557-564, 1992.

M.F. Thorpe and I. Jasiuk, "New Results in the Theory of Elasticity for Two-Dimensional Composites," Proceedings of the Royal Society of London, Series A, 438, pp. 531-544, 1992.

I. Jasiuk, J. Chen, and M.F. Thorpe, "Elastic Properties of Two-Dimensional Composite Containing Polygonal Holes," Processing, Fabrication and Manufacturing of Composite Materials, edited by T.S. Srivatsan and E.J. Lavernia, ASME, New York, pp. 61-74, 1992.

C. Chmielewski and K. Jayaraman, "The Effect of Polymer Extensibility on Crossflow of Polymer Solutions through Cylinder Arrays," Journal of Rheology, 36(6), pp. 1105-1126, 1992.

R. Polance and K. Jayaraman, "Maleation of polypropylene in a co-rotating twin screw extruder," Proceedings of the 8th Annual Meeting of the Polymer Processing Society, pp. 46-47, October, 1992.

N. Losure, C.A. Petty, and K. Jayaraman, "Effects of Reactive Filling on Inhomogenities in Liquid Composite Molding," Proceedings of the 8th Annual Meeting of the Polymer Processing Society, pp. 37-38, October, 1992.

Walter, B., M.M. Koochesfahani and Foss, J.F., "Transverse vorticity measurements in the wake of an inverted oscillated D-shaped cylinder," Proceedings of the IUTAM Symposium on Bluff-Body Wakes, Dynamics, and Instabilities, Goettingen, Germany, 7-11 September 1992, 67-70, Springer-Verlag, 1993, 1992.

Gendrich, C.P., M.M. Koochesfahani and Visbal, M. R., "The vortical and visual signature ofleading edge separation," Bull. Am. Phys. Soc., 37(8), 1747, 1992.

M.M. Koochesfahani and Mac Kinnon, C.G., "Mixing enhancement in a low Reynolds number forced wake," Bull. Am. Phys. Soc., 37(8), 1767, 1992.

M.M. Koochesfahani, V. Smiljanovsky, and T.A. Brown, "Effect of Initial Acceleration on the Development of the Flow Field of an Air Foil Pitching at Constant Rate," presented at the NASA/AFOSR/ARO Workshop on Physics of Forced Unsteady Separation, NASA Ames Research Center, NASA Conference Publication 3144, pp. 317-326, 1992.

B. Rangarajan, C.T. Lira, "Interpretation of Aerogel Shrinkage During Drying," in Better Ceramics Through Chemistry V, M.J. Hampden-Smith, W.G. Kemperer, C.J. Brinker, eds., MRS Symposium Proceedings, Vol. 271, Material Research Society, Pittsburgh, PA, p. 559, 1992.

G.L. White, C.T. Lira, "Multiphase behavior of CO2 with Solid Aromatics," Fluid Phase Equil., 78, 269-284, 1992.

X. Lu and D. Liu, "An Interlayer Shear Slip Theory for Cross-Ply Laminates with Nonrigid Interfaces," AIAA Journal, 30(4), pp. 1063-1073, 1992.

X. Lu and D. Liu, "An Interlaminar Shear Stress Continuity Theory for both Thin and Thick Composite Laminates," Journal of Applied Mechanics, 59(3), pp. 502-509, 1992.

C.Y. Lee and D. Liu, "Layer Reduction Techniques for Composite Laminate Analysis," Computers and Structures, 44(6), pp. 1305-1315, 1992.

C.Y. Lee and D. Liu, "Static and Vibration Analysis of Laminated Beams by Using an Interlaminar Shear Stress Continuity Theory," International Journal for Numerical Methods in Engineering, 33(2) pp. 409-424, 1992.

C.Y. Lee and D. Liu, "An Interlaminar Stresses Continuity Theory for Laminated Composite Stress Analysis," Computers and Structures, 42(1), pp. 69-78, 1992.

C. Zhang and J.R. Lloyd, "Control of Radiation Heat Transfer through a Composite Window Featuring ER Fluids: a Conceptual Investigation," 2nd Minsk International Heat and Mass Transfer Forum, Minsk, Byelorussia, 1992.

C. Zhang and J.R. Lloyd, "Measurements of Radiation Heat Transfer in Electrorheological Fluid Based Composite Materials," National Heat Transfer Conference, HTD 203, pp. 55-62, 1992.

J.P. Lucas, N.Y.C. Yang, and J.J. Stevens, " Interface and Near-Interface Microstructure of Discontinuous Reinforced Metal Matrix Composites," Structure and Properties of Interfaces in Materials" Materials Symposium ICCM-9, 95, p. 633, 1992.

J.P. Lucas, "Delamination Fracture: Effects of Fiber Orientation on Fracture of a Continuous Fiber Composite Laminate" Engineering Fracture Mechanics, 43-2, p. 543, 1992.

J.P. Lucas, "Fracture Toughness Determination Using a Modified Chevron-Notch Short Bar Specimen," Chevron-Notch Fracture Text Experience Metals and Non-Metals, ASTM-STP, p. 1172, 1992.

J.J. McGrath, J.E. Hunter, A. Bernard, and B.J. Fuller, "On the Use of Micro-Diffusion Chamber Methods to Determine the Coupled Transport of Water and Cryoprotective Agents Across Biological Membranes," Proceedings of the XXIII ICHMT-International Symposium on Biomedical Heat and Mass Transfer, pp. 271-296, 1992.

Z. Sun, R.J. Morgan and D.N. Lewis, "Calculation of Crystalline Modulus of Syndiotactic Polystyrene Using Molecular Modeling", Polymer, 33 (4), 725-727, 1992.

R.J. Morgan and N.L. Butler, "Hydrolytic Degradation Mechanism of Kevlar 49 Fibers When Dissolved in Sulfuric Acid", Polymer Bulletin, 27, 689-696, 1992.

Z. Sun, R.J. Morgan, and D.N. Lewis, "Crystallization of Syndiotactic Polystyrene Under Pressure", Polymer Communications, 33 (3), 660-662, 1992.

A.W. Chan and R.J. Morgan, "Modeling Preform Impregnation and Void Formation in Resin Transfer Molding of Unidirectional Composites", Polymer Composites, 23 (3), 48-52, 1992.

A.W. Chan and R.J. Morgan, "Sequential Multiple Port Injection for Resin Transfer Molding of Polymer Composites," SAMPE Quarterly, Vol. 24, No. 1, 45-49, 1992.

A.W. Chan and R.J. Morgan, "Resin Impregnation and Void Formation in Enhanced Resin Transfer Molding Scheme", Proceedings of 8th Annual ASM/ESD Advanced Composites Conference, Chicago, IL, November 2-5, 1992.

E. Baer, A. Hiltner, and R.J. Morgan, "Biological and Synthetic Hierarchical Composites," Physics Today, 60-67, October 1992.

R.J. Morgan, E. Baer and A. Hiltner, "Advanced Structural Multiperformance Materials for the Next Century," SAMPE Journal, 29, No. 2, 9-16, March/April 1992.

K. Mukherjee, A. Herdayat, and J. Rechtien, "Phase Transformation in Carbon Coated Nitinol, with Application to the Design of a Prosthesis for the reconstruction of the Anterior Cruciate Ligament," Journal of Materials Science: Materials in Medicine, 3, p. 65, 1992.

G.T. Burns, J. A. Ewald, and K. Mukherjee, "Hot Press Sintering Studies of Amorphous Silicon Nitride Powders," Journal of Materials Science, 27, p. 3599, 1992.

C.W. Chen, P.A. Khan, and K. Mukherjee, "Laser Fabrication of Pb Doped Bi-Sr-Ca-Cu-O Superconductor," Journal of Materials Science, 27, p. 3221, 1992.

A. Hedayat, J. Rechtien, and K. Mukherjee, "The Effect of Surface Constraint on the Phase Transformation of Nitinol," Journal of Materials Science, 27, p. 5306, 1992.

P.A. Khan, M. Cherif, V. Barnekov, and K. Mukherjee, "High Speed, High Energy Automated Machining of Hardwoods Using a CO2 Laser," Proceedings of ICCLEO '91 Laser Institute of America, Laser Materials Processing, 74, p. 238, 1992.

R. Narayan, "Abbaubare Polymere (Degradable Polymers)," Recycling, von Kunststoffen, G. Menges, W. Michaeli, and M. Bittner, Eds., p.199, 1992.

M. Krishnan and R. Narayan, "Compatibalization of Biomass Fibers with Hydrophobic Materials," Materials Research Society, Symposium Proceedings, 266(93), 1992.

M. Ostoja-Starzewski, "Plastic Flow of Random Media: Micromechanics, Markov Property and Slip-Lines," Applied Mechanics Reviews, 45(3 Part 2), pp. S75-S82, 1992.

M. Grah, K.J. Bowman, and M. Ostoja-Starzewski, "Fabrication of Two-Dimensional Microstructues in Fe-3.25% Si Sheet," Scripta Metallurgica, 26(1), pp. 429-434, 1992.

M. Ostoja-Starzewski, "Boundary Value Problems in Plastic Flow of Random Media," Plastic Flow and Creep, edited by H. Zbib, AMD 135, MD 31, pp. 149-158, 1992.

M. Ostoja-Starzewski, "Random Fields and Processes in Mechanics of Granular Materials," 31, pp. 71-80, 1992.

M. Ostoja-Starzewski and R. Setyabudhy, "Limit Analysis of a Cylindrical Tube of a Random Inhomogeneous Plastic Material Under Internal Pressure," Recent Advances in Structural Mechanics, edited by Y.W. Kwon and H.H. Chung, PPV 248, NE 10, pp. 87-92, 1992.

T.J. Pence, "On the Mechanical Dissipation of Solutions to the Reinmann Problem for Impact Involving a Two-Phase Elastic Material," Archive for Rational Mechanics and Analysis, 117, pp. 1-52, 1992.

J. Song and T.J. Pence, "On the Design of Three-ply Non-linearly Elastic Composite Plates with Optimal Buckling Performance," Structural Optimization, 5, pp. 45-54, 1992.

J. Lin and T.J. Pence, "Kinetically Driven Elastic Phase Boundary Motion Activated by Concurrent Dynamic Pulses," Transactions of the Tenth Army Conference on Applied Mathematics and Computing, edited by F. Dressel, pp. 69-86, 1992.

A.B. Scranton, C.N. Bowman, J. Klier, and N.A. Peppas, "Polymerization Reaction Dynamics of Ethylene Glycol Methacrylates and Dimethacrylates by Calorimetry," Polymer, 33, p. 1683, 1992.

A.B. Scranton, J. Klier, and C.L. Aronson, "Complexation of Polmeric Acids with Polymeric Bases," Polyelectrolyte Gels, edited by R.S. Harland and R.K. Prud'homme, ACS Symposium Series 480, American Chemical Society, 1992.

A.B. Scranton, J. Klier, C.L. Aronson, "Complexation of Polymeric Acids with Polymeric Bases," Polyelectrolyte Gels, edited by R.S. Harland and R.K. Prud'homme, ASC Symposium Series 480, American Society, 1992.

C.L. Aronson and A.B. Scranton, "Complexation of Poly(4-vinyl phenol) with Poly(N, N-dimethylacrylamide)," Proceedings of the Eighth Annual ASM/ESD Advanced Composites Conference, 1992.

A.B. Scranton, C.N. Bowman, J. Klier, and N.A. Peppas, "Polymerization Reaction Dynamics of Ethylene Glycol Methacrylates and Dimethacrylates by Calorimetry," Polymer, 33, p. 1683, 1992.

A.B. Scranton, J. Klier, and C.L. Aronson, AComplexation of Polymeric Acids with Polymeric Bases," in APolyelectrolyte Gels," edited by R.S. Harland and R.K. Prud'homme, ACS Symposium Series 480, American Chemical Society, Washington, DC, p. 171, 1992.

C.L. Aronson and A.B. Scranton, "Complexation of Poly(4-vinyl phenol) with Poly(N,N-dimethylacrylamide)," Proceedings of the 8th Annual ASM/ESD Advanced Composites Conference, Chicago, IL, 1992.

R. Simpson and S.E. Selke, "Composite Materials from Recycled Multi-Layer Polypropylene Bottles and Wood Fibers," Emerging Technologies in Plastics Recycling, 513, pp. 232-240, 1992.

E.E. Shin and K.D. Pae, "Effects of Hydrostatic Pressure on the Torsional Shear Behavior of Graphite/Epoxy Composites," Journal of Composite Material, 26, No.4, p462, 1992.

E.E. Shin and K.D. Pae, "Effects of Hydrostatic Pressure on In-Plane Shear Properties of Graphite/Epoxy Composites," Journal of Composite Material, 26, No.6, p828, 1992.

E.E. Shin, A. Hiltner, and E. Baer, "Analysis of the Internal Crazes in Notched SAN," Journal of Applied Polymer Science, 46, p213, 1992.

A. Hiltner, K. Sung, E.E. Shin, S. Bazhenov, J. Im, and E. Baer, "Polymer Microlayer Composites," Symposium Proceedings of the Materials Research Society, Vol.225, p141, 1992.

A. Hiltner, K. Sung, E.E. Shin, S. Bazhenov, J. Im, and E. Baer, "Polymer Microlayer Composites, Composite Interfaces," The 4th International Conference on Composite Interfaces (ICCI-IV), May, 1992.

P. Soroushian, A.Khan, and J.Hsu, "Mechanical Properties of Concrete Reinforced with Polyethylene or Polypropolene Fibers," ACI Materials Journal, 89(6), pp. 535-540, 1992.

P. Soroushian, M. Nagi, and A. Okwuegbu, "Freeze-Thaw Durability of Lightweight Carbon Fiber Reinforced Cement Composites," ACI Materials Journal, 89(5), pp. 491-494, 1992.

P. Soroushian and S. Marikunte, "Moisture Effect on Flexural Performance of Wood Fiber Cement Composites," ASCE Materials Journal, 6(3), pp. 275-291, 1992.

P. Soroushian, M. Nagi, and J.Hsu, "Optimization of the Use of Lightweight Aggregates in Carbon Fiber Reinforced Cement," ACI Materials Journal, 80(3), pp. 267-275, 1992.

P. Soroushian, M. Nagi and A. Alhozainy, "Statistical Variations in the Mechanical Properties of Carbon Fiber Reinforced Cement Composites," ACI Materials Journal, 89(2), pp. 131-138, 1992.

J. Sticklen, A. Kamel, M.C. Hawley, and V. Adegbite, "Fabricating Composite Materials: A Comprehensive Problem Solving Architecture Based on a Generic Task Viewpoint," IEEE Expert, Spring 1992.

K.N. Subramanian and R. Vaidya, "Load Transfer Mechanism in a Continuous Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composite," Composites Science and Technology, 43, p. 245, 1992.

C.L. Weitzsacker and J.A. Gardella, Jr., "Quantitative Electron Spectroscopic Analysis of Argonne Premium Coals," Analytical Chemistry, 60(9), 1068-1075, 1992.

Q. Zheng, "Tensile Strength of Water, " Science (Chinese),44(5) 35, 1992.