1991

N. Liu and N.J. Altiero, "Multiple Cracks and Branch Cracks in Finite Plane Bodies," Mechanics Research Communications, 18, pp. 233-244, 1991.

J. Hopwood and J. Asmussen, "Neutral Gas Temperatures in a Multipolar Electron Cyclotron Resonance Plasma," Applied Physics Letters, 58, pp. 2473-2495, 1991.

B. Musson, F.C. Sze, D.K. Reinhard, and J. Asmussen, "Anisotropic Etching of Submicron Features in a 25 cm Diameter Microwave Multicusp ECR Plasma Reactor," Journal of Vacuum Science and Technology," B9, pp. 3521-3525, 1991.

J.N. Reddy and R.C. Averill, "Advances in the Modeling of Laminated Plates," Computing Systems in Engineering, Vol.2, pp.541-555, 1991.

J.V. Beck and A.M. Osman, "Sequential Estimation of Temperature-Dependent Thermal Properties," High Temperatures-High Pressures, 23, pp. 255-266, 1991.

G.J. Blanchard, "Counterion Dependent Reorientation Dynamics of an Oxazine in Polar Protic and Aprotic Solvents," Journal of Phys. Chem., 95, pp. 5293-5299, 1991.

G.J. Blanchard and J.P. Heritage, "Perturbation of the Nonlinear Optical Response of a Conjugated Polymer by an Adsorbate Induced Electronic State," Chem. Phys. Lett., 177, pp. 287-292, 1991.

G.J. Blanchard, "Time-Resolved Measurement of the Stimulated Emission Strokes Shift in LDS750: Evidence for Inhomogeneous Relaxation Kinetics," Journal of Chem. Phys., 95, pp. 6317-6325, 1991.

C.C. Chiu and E.D. Case, "Elastic Modulus Determination of Coating Layers as Applied to Ceramic Composites," Materials Science and Engineering, A132, pp. 29-47, 1991.

C.A. Gamlen, E.D. Case, D.K. Reinhard, and B. Huang, "Adhesion of Polycrystalline Diamond Thin-Films on Single-Crystal Silicon Substrates," Journal of Applied Physics Letters, 59, pp. 2529-2531, 1991.

Y.M. Kim, W.J. Lee and E.D. Case, "The Measurement of the Surface Heat Transfer Coefficient for Ceramics Quenched into a Water Bath," Materials Science and Engineering, A145, pp. L7-L11, 1991.

A.W. Chan and S.T. Hwang, "Modeling of the impregnation process during resin transfer molding," Polymer Engineering and Science, 31, 1149, 1991.

A.W. Chan and S.T. Hwang, "Anisotropic In-Plane Permeability of Fabric Media," Polymer Engineering and Science, 31, 1233, 1991.

A.W. Chan and S.T. Hwang, "Modeling of Resin Impregnation During the Manufacture of Polymer Composites," Proceedings of SPE ANTEC, Montreal, May 5-9, 2575, 1991.

C.L. Lin and K. Chen, "Non-destructive Measurements of Electomagnetic Properties of Materials," presented at 1991 IEEE AP-S International Symposium and URSI National Radio Science Meeting, June 24-28, 1991.

Y.Q. Sun, P.M. Hazzledine, and M.A. Crimp, "Dislocations with Non-Planar Locked Structures in L12 Ordered Alloys," High Temperature Ordered Alloys IV, Materials Research Society Proceedings, Editors L. Johnson, D.P. Pope, and J.O. Stiegler, 213, pp. 311-316, 1991.

M.A. Crimp and K. Vedula, "Room Temperature Deformation of Single Crystal B2 Fe-Al Alloys: The Effect of Stoichiometry and Cooling Rate," Philosophical Magazine A, 63(3), pp. 559-570, 1991.

Y.Q. Sun, P.M. Hazzledine, and M.A. Crimp, "The Locking of <112>/3 Super-Shockley Partials in L12 Ordered Single Crystals Deformed at 77K," Philosophical Magazine A, 64(1), pp. 223-224, 1991.

Y.Q. Sun, P.M. Hazzledine, M.A. Crimp, and A. Couret, "The Locking of <110> Edge Dislocations on {001}in L12 Ordered Compounds: High-Resolution Electon-Microscopy Observations," Philosophical Magazine A, Editors Y.Q. Sun, P.M. Hazzledine and A. Couret, 64(2), pp. 311-331, 1991.

N. Dontula, P.C. Sukanek, H. Devanathan, and G.A. Campbell, "An Experimental and Theoretical Investigation of Transient Melt Temperatures in Injection Molding," Polymer Engineering and Science, 31, pp1674-1683, 1991.

N.S. Ramesh, N. Dontula, D.H. Rasmussen, and G.A. Campbell, "Theoretical and Experimental Study of the Dynamics of Foam Growth in Thermoplastic Materials," Proceedings of 49th SPE ANTEC, pp 1292-1296, Montreal, Canada, 1991.

D. S. Grummon, R. Schalek, A. Ozzello, J. Kalantar, and L.T. Drzal, "High-energy Ion Implantation of Polymeric Fibers for Modification of Reinforcement-Matrix Adhesion," Nuclear Instrument and Methods in Physics Research, pp. 5-9, 1991.

V. Rao and L.T. Drzal, "The Dependence of Interfacial Shear Strength on Matrix and Interphase Properties," Polymer Composites, 12, pp. 48-56, 1991.

M.C. Waterbury and L.T. Drzal, "On the Determination of Fiber Strengths by In-Situ Fiber Strength Testing," Journal Composite Technology Research, 13, pp. 22-28, 1991.

M. Madhukar and L.T. Drzal, "Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. I. Inplane and Interlaminar Shear Behavior of Graphite/Epoxy Composites," Journal of Composite Materials, 25, pp. .932-957, 1991.

M. Madhukar and L.T. Drzal, "Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. II. Longitudinal (0o) and Transverse (90o) Tensile and Flexure Behavior of Graphite/Epoxy Composites," Journal of Composite Materials, 25, pp. 958-991, 1991.

V. Rao, P. Herrera-Franco, A.D. Ozzello, and L.T. Drzal, "A Direct Comparison of the Fragmentation test and the Microbond Pull-Out Test for Determining the Interfacial Shear Strength," Journal of Adhesion, 34, pp. 65-77, 1991.

V. Rao and L.T. Drzal, "Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material," Journal of Adhesion, 35, pp. 245-249, 1991.

E.K. Drown, H. Al-Moussawi, and L.T. Drzal, "Glass Fiber 'Sizings' and Their Role in Fiber-Matrix Adhesion," Journal of Adhesion Science and Technology, 5, pp. 865-881, 1991.

C. Dunn, K. Battjes, E. English, E. Fouch, P.J. Hogg, R.J. Morgan, and S. Turner, ADurability of Polymer Matrix Fibrous Composites, Elsevier, p. 129, 1991.

P.M. Fitzsimmons and D. Traham, "Characterization and Enhancement of Damping within Composite Beams," SPIE OE/Aerospace Sensing Conference, April, 1991.

P. P. Vaishnava, J. Kelly, and C.L. Foiles, "Electron Energy Loss Spectroscopy of Pb2Sr2Eu1-xCaxCu3O8+z Superconductors," Fourth International Symposium on Superconductivity, 1991.

B.S. Thompson, M.V. Gandhi, M. Usman, and S.B. Choi, "The Impact of Intelligent Materials on Design Practices for Mechanisms, Machines and Robotic Systems," Second National Applied Mechanisms and Robotics Conference, 1(11), VIB. 6-1 to VIB 6-7, 1991.

K.J. Liu, R.J. Hernandez, and J.R. Giacin, "The Effect of Water Activity and Penetrant Vapor Activity or the Permeation of Toluene Vapor Through a Two-Sided PVDC Coated Opaque Oriented Polypropylene," Journal of Plastic Film and Sheeting, 7(1), p. 56, 1991.

E.D. Goodman and L.T.W. Hoppensteadt, "A Method for Accurate Simulation of Robotic Spray Application Using Empirical Parameterization," Proceedings of IEEE International Conference on Robotics and Automation, pp. 1357-1368, 1991.

C. Kim, D.S. Grummon, and G. Gottstein, "Processing and Interface Characteristics of Graphite Fiber Reinforced Tantalum Carbide Matrix Composites," Scripta Metallurgica, 25, pp. 2351-2356, 1991.

R. Schalek and D.S. Grummon, "Low-Energy Ion Implantation of Ultra-High Molecular Weight Polyethylene (UHMW-PE) Fibers," Advanced Composite Materials: New Developments and Applications, Proceedings of the 7th ASM/ESD Advanced Composites Conference, Detroit, Michigan, pp. 389-395, 1991.

D.S. Grummon, R. Schalek, J. Kalantar, and A. Ozzello, "High-Energy Ion Implantation of Polymeric Fibers for Modification of Reinforcement-Matrix Adhesion," Nuclear Instruments and Methods, B59/60, pp. 1271-1275, 1991.

D.S. Grummon, R. Schalek, J. Kalantar, and A. Ozzello, "High Energy Ion Implantation of Polymeric Fibers for Modification of Reinforcement-Matrix Adhesion," Nuclear Instruction and Methods, B59/60, pp. 1271-1275, 1991.

C. Kim, D.S. Grummon, and G. Gottstein, "Processing and Interface Characteristics of Graphite Fiber Reinforced Tantalum Carbide Matrix Composites," Scripta Metall., 25, pp. 2351-2356, 1991.

D.S Grummon, R. Schalek, J. Kalantar, and A. Ozzello, "High-Energy Ion Implantation of Polymeric Fibers for Modification of Reinforcement-Matrix Adhesion," Nuc. Instr. and Methods, A59-60, pp. 1271-1275, 1991.

V. Adegbite, M.C. Hawley, J. Sticklen, and A. Kamel, "Implementation of an Artificial Intelligence Technique for Real-Time Control of Microwave Processing of Composite Materials," 7th Annual ASM/ESD Advanced Composites Conference, pp.409-413, 1991.

L. Fellows and M.C. Hawley, "Microwave Processing of LARC-TPI Polyimide Composites," Proceedings of ICCM/VII, 2(12E), 1991.

M.C. Hawley and J. Wei, "Processing of Polymers and Polymer Composites in a Microwave Applicator," Materials Research Society, 189, pp. 413-421, 1991.

U. Hottong, J. Wei, R. Dhulipala, and M.C. Hawley, "Microwave Processing of Polyester and Polyester/Glass Composites," Ceramic Transactions, ACerS Inc., 21, pp.587-595, 1991.

J. Wei, Y. Chang, B. Thomas, and M.C. Hawley, "Microwave Heating of Thick-Section Graphite Fiber/Epoxy Composites," Proceedings of ICCM/VIII, 1(10L), 1991.

J. Wei, J. Jow, J.D. DeLong, and M.C. Hawley, "Microwave Processing of Crossply Continuous Graphite Fiber/Epoxy Composites," SAMPE Journal, 27(1), p. 33, 1991.

M. Lee and I. Jasiuk, "Asymptotic Expansions for the Thermal Stresses in Bonded Semi-infinite Bi-material Strips," ASME Journal of Electronic Packaging, 113, pp. 173-177, 1991.

I. Jasiuk, E. Tsuchida, and T. Mura, "Spheroidal Sliding Inclusion in an Elastic Half-Space," Applied Mechanics Reviews, 44(11), pp. S143-S149, 1991.

A.K. Jain, M. Dubuisson, and M. Madhukar, "Multisensor Fusion for Nondestructive Inspection of Fiber Reinforced Composite Materials," Proceedings of Sixth Technical Conference of the American Society of Composites, pp. 941-950, October, 1991.

K. Jayaraman and C.N. Satyadev, "The role of fluid rheology in resin transfer molding," Proceedings of Seventh Annual ASM/ESD Advanced Composites Conference, pp. 225-232, 1991.

K. Jayaraman, "Control of resin infusion through fiber bundles and preforms," Proceedings of the Fiber Producer Conference, pp. 6B-2-6B-4, 1991.

C. Chmielewski, K. Jayaraman, and C.A. Petty, "Viscosity effects on the manufacture of composite prepreg," Proceedings of the 6th Technical Meeting of the American Society of Composites, p. 993-1001, 1991.

R. Polance and K. Jayaraman, "A Model Reactor for Continuous Flow Reactions on Polymers," Proceedings of the 7th Annual Meeting of the Polymer Processing Society, pp. 139-140,, 1991.

M.M. Koochesfahani and MacKinnon, C.G., "Influence of forcing on the composition of mixed fluid in a two-stream shear layer," Phys. Fluids A, 3(5), 1135-1142, 1991.

MacKinnon, C.G. and M.M. Koochesfahani, "Composition of entrained fluid in a forced mixing layer," Bull. Am. Phys. Soc., 36(10), 2660, 1991.

A. Lee, G.B. McKenna, and M. Santore, "Aging in Glasses Subjected to Large Stresses and Deformations," Journal of Non-Crystalline Solids, 131, pp. 497-504, 1991.

B. Rangarajan, C.T. Lira, "The Effect of Aging on Aerogel Density," Journal of Non-Cryst. Solids, 136, 111-118, 1991.

B. Rangarajan, C.T. Lira, "Production of Aerogels," Journal of Supercritical Fluids, 4, 1-6, 1991.

X. Lu and D. Liu, "Finite Element Analysis on Strain Energy Release Rates at Delamination Front," Journal of Reinforced Plastics and Composites, 10(3), pp. 279-292, 1992.

C.Y. Lee and D. Liu, "An Interlaminar Stress Continuity Theory for Laminated Composite Beam Analysis," AIAA Journal, 29(11), pp. 2010-2012, 1991.

J.R. Lloyd and P.J. Marto, "A Predictive Method to Describe the Boiling Behavior of Refrigerant/Oil Mixtures," Naval Postgraduate School Technical Report, NPA ME-90-07, p. 34, 1991.

S.M. Bajorek, J.R. Lloyd, and J.R. Thome, "Prediction Methods for Boiling of Pure and Multi-Component Fluids on a Low Finned Tube," Fouling and Enhancement Interactions, Editors T.J. Rabas and J.M. Chenoweth, 28th National Heat Transfer Conference, 164, pp. 101-108, 1991.

J.P. Lucas, "Fiber Angle Effects on Delamination Fracture Toughness of a Continuous-Fiber Composite Laminate," Advanced Composite Materials, Ceramics Transfer Series, 19, p. 543, 1991.

J.P. Lucas, P.K. Liaw, J.J. Stephens, and J. Nunes, "Effects of Particulate Fracture in Determining Fracture Toughness of Metal Matrix Composites," Proceedings of the Morris E. Fine Symposium, p. 171, 1991.

J.P. Lucas, J.J. Stephens, and F. Greulich, "The Effects of Reinforcement Stability on Composition Redistribution in Cast Aluminum Metal Matrix Composites," Material Science and Engineering, A131, p. 221, 1991.

J. Wille and J.J. McGrath, "Dynamic Light Microscopy and Numerical Modeling of Fiber Orientation and Distribution in Thermoplastic Injection Molding," Proceedings of the American Society for Composites, Sixth Technical Conference, Technomic Publishing, Lancaster, pp. 183-188, 1991.

C.M.R. Dunn, K.P. Battjes, E.J. English, E. Fouch, P.J. Hogg, R.J. Morgan, and S.E.Turner, "Durability of Polymer Matrix Fibrous Composites", in "Durability of Polymer Based Composite Systems for Structural Applications", A.H. Cardon and G. Verchery, Eds., Elsevier, 129-148, 1991.

H.H. Man and R.J. Morgan, "The Effects of Impact and Moisture Content on the Flexural Properties of Bismaleimide - Carbon Fiber Composites", Proceedings of 7th ASM/ESD Advanced Composites Conference, Detroit, MI, pp. 555-565, 1991.

Z. Sun, R.J. Morgan and D.N. Lewis, "Carbon Fiber Reinforced Composite with a New Engineering Thermoplastic Resin", Proceedings of 7th ASM/ESD Advanced Composites Conference, Detroit, MI, pp. 325-330, 1991.

T. Donnellan, P.A. Mehrkam, A. Yen, R. Jurek and R.J. Morgan, "Structure-Property Relationships in High Temperature Resins and Composites", Proceedings of American Society for Composites 6th Technical Conference, Rensselaer Univ., pp.3-12, 1991.

C.M.R. Dunn, R.J. Morgan, E.J. Fouch, H.H. Man, P.J. Hogg and S. Turner, "Service Performance Evaluation Program for Polymer Composites", Proceedings of ASTM Symposium on High Temperature and Environmental Effects on Polymeric Composites, San Diego, 1991.

Mahendra Jain, R. Narayan, and A. Lathia, "Anaerobic Processing of Wyodak (U.S.A.) Coal", Fuel, 70, 576, 1991.

R. Narayan, "The move towards Biomass (Renewable) Resources for Production of Materials, Chemicals and Fuels -- A Paradigm Shift," Emerging Technologies for Materials & Chemicals from Biomass, Editors R. Rowell, T. Schultz, R. Narayan, ACS Symposium Series, 476(1), 1991.

R. Narayan, "Compatibilization of Lignocellulosics with Plastics," Emerging Technologies for Materials and Chemicals from Biomass, Editors R. Rowell, T. Schultz, R. Narayan, ACS Symposium Series, 476(57), 1991.

M. Ostoja-Starzewski, "Random Fields and Processes on Mechanic of Granular Materials," Studies in Applied Mechanics, 31, pp. 71-80, Mechanics of Materials, in press, 1991.

M. Ostoja-Starzewski, "Wavefront Propagation in a Class of Random Microstructures--I: Bilinear Elastic Grains," International Journal of Non-Linear Mechanics, 26(5), pp. 655-699, 1991.

M. Ostoja-Starzewski, "Transient Waves in a Class of Random Heterogeneous Media," invited paper, Applied Mechanics Reviews (Mechanics Pan-American), 44(10 Part 2), pp. 5199-5209, 1991.

T.J. Pence and J. Song, "Buckling Instabilities in a Thick Elastic Three-Ply Composite Plate Under Trust," International Journal of Solids and Structures, 27, pp. 1809-1828, 1991.

T.J. Pence, "On the Encounter of an Acoustic Shear Pulse with a Phase Boundary in an Elastic Material: Reflection and Transmission Behavior," Journal of Elasticity, 25, pp. 31-74, 1991.

C.J. Radcliffe, A.J. Hull, and C.R. MacCluer, "State Estimation of a Nonself-Adjoint Acoustic System," ASME Journal of Dynamic Systems, Measurement and Control, 113, pp. 122-126, 1991.

C.J. Radcliffe and A.J. Hull, "An Eigenvalue Based Accoustic Impedance Measurement Technique," ASME Journal of Vibration and Acoustics, 113, pp. 250-254, April, 1991.

C.J. Radcliffe and M. Habib, "Active Parametric Damping of Distributed Parameter Beam Transverse Vibration," ASME Journal of Dynamic Systems, Measurement and Control, 113, pp. 295-299, 1991.

C.J. Radcliffe, C.R. MacCluer, and A.J. Hull, "Diagonalizing Acoustic Models," SIAM Journal on Applied Mathematics, 51(4), pp. 1006-1010, 1991.

C.J. Radcliffe and S.C. Southward, "Robust Nonlinear Stick-Slip Friction Compensation," ASME Journal of Dynamic Systems, Measurement and Control, 113, pp. 639-645, 1991.

C.J. Radcliffe, A.J. Hull, and S.C. Southward, "Global Active Noise Control of a One-Dimensional Acoustic Duct Using a Feedback Controller," ASME Journal of Dynamic Systems, Measurement and Control, ASME Winter Annual Meeting, 1991.

A.B. Scranton, J. Klier, and N.A. Peppas, "Complexation Thermodynamics of Free and Graft Oligomers with Complementary Polymers," Journal of Polymer Science, Polymer Physics, 29, p. 211, 1991.

A.B. Scranton, J. Klier, and N.A. Peppas, "Statistics of Free Radical Polymerizations: Reaction Directionality and Multiple Termination Mechanisms," Macromolecules, 24, p. 1412, 1991.

A.B. Scranton, J. Klier, and N.A. Peppas, "Complexation Thermodynamics of Free and Graft Oligomers with Complementary Polymers," Journal of Polymer Science, Polymer Physics, 29, p. 211, 1991.

A.B. Scranton, J. Klier, and N.A. Peppas, "Statistics of Free Radical Polymerizations: Reaction Directionality and Multiple Termination Mechanisms," Macromolecules, 24, p. 1412, 1991.

H. Hughes, S.E. Selke, and R. Stapleton, "Establishment of a Recycling Data Base," Proceedings of the Seventh Annual ASM/ESD Advanced Composites Conference, 1991.

A. Tse, E.E. Shin, A. Hiltner, E. Baer, and R. Laakso, "The Stress-Whitened Damage Zone of PVC Blends," Journal of Materials Science, 26, p2823, 1991.

A. Tse, E.E. Shin, A. Hiltner, and E. Baer, "Damage Zone Development in PVC under a Multi-axial Tensile Stress State," Journal of Materials Science, 26, p5374, 1991.

P. Soroushian and Z. Bayasi, "Fiber-Type Effects on the Performance of Steel Fiber Reinforced Concrete," American Concrete Institute Materials Journal, 88(2), pp. 129-134, 1991.

P. Soroushian and A. Tlili, "Impact Resistance and Toughness of Polymer Modified Steel Fiber Reinforced Concrete," Proceedings of International Symposium on Interaction of Conventional Munitions with Protective Structure, 4, pp. 309-316, 1991.

P. Soroushian and S. Marikunte, "Moisture Sensitivity of Cellulose Fiber Reinforced Cement, "Durability of Concrete," American Concrete Institute, editor V.M. Malhsita, Publication SP-126, 2, pp. 821-835, 1991.

P. Soroushian, "Latex-Modified Carbon Fiber Reinforced Mortar," American Concrete Institute Materials Journal, 83(1), pp. 11-18, 1991.

P. Soroushian and Z. Bayasi, "Strength and Ductility of Steel Fiber Reinforced Concrete Under Bearing Pressure," Magazine of Concrete Research, 63(157), pp. 243-248, 1991.

P. Soroushian and A. Tlili, "Latex Modification Effects on the Impact Resistance and Toughness of Plain and Steel Fiber Reinforced Concrete," Transportation Research Record No. 1301, Transportation Research Board, National Research Council, 11.6.11, 1991.

J. Sticklen, W.E. Bond, and A. Kamel, "Integrating Quantitative and Qualitative Computations in a Functional Framework," Engineering Applications of Artificial Intelligence, 4(1), pp. 1-10, 1991.

J. Sticklen, A. Kamel, M.C. Hawley, and J. DeLong, "An Artificial Intelligence-Based Design Tool for Thin Film Composite Materials," Applied Artificial Intelligence, in press, 1991.

V. Adegbite, M.C. Hawley, J. Sticklen, and A. Kamel, "Implementation of an Artificial Intelligence Technique for Real Time Control of Composite Materials," ASM/ESD Advanced Composites Conference and Exposition, pp. 409-413, 1991.

K.N. Subramanian and R. Vaidya, "Fabrication of Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composites," Materials and Manufacturing Processes, 6, p. 605, 1991.

K.N. Subramanian and R. Vaidya, "Coated Carbon Fiber Reinforcements for a Glass-Ceramic," Journal of Material Science Letters, 10, p. 967, 1991.

K.N. Subramanian and R. Vaidya, "Elevated Temperature Mechanical Properties of Continuous Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composites," Journal of Materials Science, 26, p. 1391, 1991.

K.N. Subramanian and R. Vaidya, "Discontinuous Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composites," Journal of Materials Science, 26, p. 6453, 1991.

N. Mousseau and M.F. Thorpe, "Length Distributions in Metallic Alloys," Physics Review B, 45, p. 2015, 1991.

M.F. Thorpe and I. Jasiuk, "New Results in the Theory of Elasticity for Two-Dimensional Composites," Accepted by Proceedings Royal Society A438, pp. 531-544, 1991.

B.S. Thompson, M.V. Gandhi, M. Usman, and S.B. Choi, "The Impact of Intelligent Materials on Design Practices for Mechanisms, Machines and Robotic Systems," Second National Applied Mechanisms and Robotics Conference, 1(11), pp. VIB. 6-1 to VIB. 6-7, 1991.

Q. Zheng, G.Wolf and C.A.Angell, "Liquids at Large Negative Pressure: Water at the Homogeneous Nucleation Limit," Science, 254, 829, 1991.