J. Asmussen, J. Hopwood, and F.C. Sze, "A 915 MHz/2.45 GHz ECR Plasma Source for Large Area Ion Beam and Plasma Processing," Review of Science Instrument, 61, pp. 250-252, 1990.

L. Mahoney and J. Asmussen, "A Compact, Resonant Cavity, Five Centimeter, Multicusp, ECR Broad Beam Ion Source," Review Science Instrument, 61, pp. 285-287, 1990.

J. Hopwood, D.K. Reinhard, and J. Asmussen, "Charged Particle Densities and Energy Distributions in a Multipolar ECR Plasma Etching Source," Journal of Vacuum Science and Technology, A8, pp. 3103-3112, 1990.

G.T. Salbert, D.K. Reinhard, and J. Asmussen, "Oxide Growth on Silicon Using a Microwave Electron Cyclotron Resonance Oxygen Plasma," Journal of Vacuum Science and Technology, A8, pp. 2919-2923, 1990.

J. Hopwood, R. Wagner, D.K. Reinhard, and J. Asmussen, "Electric Fields in a Microwave-Cavity Electron-Cyclotron Resonant Plasma Source," Journal of Vacuum Science and Technology, A8, pp. 2904-2908, 1990.

J. Zhang, B. Huang, D.K. Reinhard, and J. Asmussen, "An Investigation of the Effects of Electromagnetic Field Patterns on Microwave Plasma Diamond Thin Film Deposition," Journal of Vacuum Science and Technology, A8, pp. 2124-2128, 1990.

F.C. Sze, D.K. Reinhard, B. Musson, J. Asmussen, and M. Dahimen, "Experimental Performance of a Large Diameter Multipolar Microwave Plasma Disk Reactor," Journal of Vacuum Science and Technology, B8, pp. 1759-1762, 1990.

J. Asmussen, R. Fritz, L. Mahoney, G. Fournier, and G. DeMaggio, "ECR Ion and Free Radical Sources for MBE Applications," Review of Scientific Instruments, 61, pp. 282-284, 1990.

J. Engemann, H. Keller, D.K. Reinhard, B. Hwang, and J. Asmussen, "Dual-Side Contact Formation on Isolated Diamond Films," Applied Physics Letters, 57, pp. 2461-2463, 1990.

K. Mekki, A. Atreya, S. Agrawal, and I.S. Wichman, "Wind-Aided Flame Spread Over Charring and Non-Charring Solids: An Experimental Investigation," presented at the Twenty Third International Symposium on Combustion, Symposium Proceedings, p. 1701, 1990.

L.S. Tzeng, A. Atreya, and I.S. Wichman, "A One-Dimensional Model of Piloted Ignition," Combustion and Flame, 80, pp. 94-107, 1990.

R.C. Averill and J.N. Reddy, "Behavior of Plate Elements Based on the First-Order Shear Deformation Theory," Engineering Computations, Vol.7, pp.57-74, 1990.

J.V. Beck, "Inverse Problems in Composite Materials," International Encyclopedia of Composites, editor S.M. Lee, 2, pp. 423-429, 1990.

T.R. Bieler, and K. Mukherjee, "The High Strain Rate Superplastic Deformation Mechanisms of Mechanically Alloyed Aluminum IN90211," Materials Science and Engineering, A128, 171-182, 1990.

G.J. Blanchard and J.P. Heritage, "Frank-Condon Enhancement of X(3) in a Conjugated Polymer Under Double Resonance Conditions," Journal of Chem. Phys., 93, pp. 4377-4382, 1990.

M.J. Nowak, G.J. Blanchard, G.L. Baker, S. Etemad, and Z.G. Soos, "Inter-Chain Dynamics and Side Group Modulation of Excitons in Polydiacetylene," Phys. Rev. B, 41, pp. 7933-7936, 1990.

M.J. Nowak, G.J. Blanchard, G.L. Baker, S. Etemad, and Z.G. Soos, "Low Temperature Picosecond Spectroscopy of the Polydiacetylene PTS in the small Signal Limit," Proc. SPIE, 1147, p. 256, 1990.

G.J. Blanchard and J.P. Heritage, "Picosecond Stimulated Raman Measurement of Enhanced Optical Nonlinearities in a Conjugated Polymer," Ultrafast Phenomena VII, edited by C.B. Harris, E.P. Ippen, G.A. Mourou, and A.H. Zewail, Springer Verlag Publishers, Berlin, FRG, pp. 130-132, 1990.

G.J. Blanchard, J.P. Heritage, G.L. Baker, and S. Etemad, "Picosecond Studies of PTS: Evidence for a New Metastable State," Nonlinear Optics and Ultrafast Phenomena," edited by R.R. Alfano and L. Rothberg, Nova Publishing, New York, pp. 109-113, 1990.

M.J. Nowak, G.J. Blanchard, G.L. Baker, S. Etemad, and Z.G. Soos, "Slow Relaxations in PDA-4BCMU: From Crystals to Films," Conjugated Polymeric Materials: Opportunities in Electronics, Opto-Electronics and Molecular Electronics, edited by J.L.Bredas and R.R. Chance, NATO ASI Series E, vol. 182, pp. 421-427, Kluwer Academic Publishers, Dordrecht, 1990.

Y. Kim, W.J. Lee, and E.D. Case, "Thermal Fatigue Behavior of Ceramic Matrix Composites: A Comparison Among Fiber Reinforced, Whisker Reinforced, Particulate Reinforced, and Monolithic Ceramic," Proceedings of the American Society for Composites, Fifth Technical Conference, pp. 871-881, Technomic Publishing Company, 1990.

G.L. Cloud, P. Herrera-Franco, and M. Bayer, "Reduction of Stress Concentrations at Bolted Joints in FGRP," Proceedings of the American Society of Composites, Fifth Technical Conference, pp. 71-89, June 1990.

M.J. Crimp and R.C. Piller, "Dispersion of SiC Whiskers in a Si3N4 Matrix Using pH Control," Proceedings of the British Ceramic Society, Fabrication Technology, Editors R.W. Davidge and D.P. Thomson, 45(3), p. 199, 1990.

M.J. Crimp and R. Preston, "Evaluation of Sedimentation as a Technique for the Separation on Sub-Micron Diameter Silicon Carbide Whiskers," Proceedings of the British Ceramic Society, Fabrication Technology, Editors R.W. Davidge and D.P. Thomson, 45(3), p. 163, 1990.

L.T. Drzal, "The Role of the Fiber/Matrix Interphase on Composite Properties," Vacuum, 41, pp. 1615-1618, 1990.

J. Kalantar and L.T. Drzal, "The Bonding Mechanism of Aramid Fibers to Epoxy Matrices. Part I. A Review of the Literature," Journal of Materials Science, 25, pp. 4186-4193, 1990.

J. Kalantar and L.T. Drzal, "The Bonding Mechanism of Aramid Fibers to Epoxy Matrices. Part II. An Experimental Investigation," Journal of Materials Science, 25, pp. 4194-4202, 1990.

B. Larson and L.T. Drzal, "Carbon Fiber-Cement Adhesion in Carbon Fiber Reinforced Cement Composites," Composites, 21, pp. 205-215, 1990.

L.T. Drzal, "Intrinsic Material Limitations in Using Interphase Modification to Alter Fiber-Matrix Adhesion in Composite Materials," Proceedings of the Materials Research Society, 170, pp. 275-284, 1990.

L.T. Drzal, "The Effect of Polymeric Matrix Mechanical Properties on Fiber-Matrix Interfacial Shear Strength," Journal of Materials Science and Engineering, A126, pp. 289-293, 1990.

J. Kalantar, K.J. Hook, and L.T. Drzal, "A Novel Sample Preparation Technique for Ion and Electron Beam Analysis of the Fiber-Matrix Interphase in Polymeric Composites," Journal Vacuum Science Technology, A8(5), p. 3878-3880, 1990.

K.J. Hook, R.K. Agrawal, and L.T. Drzal, "Effects of Microwave Processing on Fiber-Matrix Adhesion II. Enhanced Chemical Bonding of Epoxy to Carbon Fibers," Journal of Adhesion, 32, p. 157-170, 1990.

L.T. Drzal and P. Herrera-Franco, "Composite Fiber-Matrix Bond Tests," Chapter in the Engineered Materials Handbook: Adhesives and Sealants, 3, pp. 392-405, 1990.

S.R. Iyer and L.T. Drzal, "Manufacture of Powder-Impregnated Thermoplastic Composites," Journal of Thermoplastic Composite Materials, 3, pp. 325-355, 1990.

S.R. Iyer and L.T. Drzal, "A Flexible Formable Composite Prefrom from Powder-Impregnated Fiber Tows," Proceedings of the 6th Annual ASM/ESD Advanced Composites Conference, pp. 345-350, 1990.

M.J. Rich, M. Madhukar, P. Herrera-Franco, and L.T. Drzal, "Characterization of Fiber-Matrix Adhesion in Composite Materials," Proceedings of the 6th Annual ASM/ESD Advanced Composites Conference, pp.141-154, 1990.

P.M. Fitzsimmons, "A Robust Model Following Controller," Proceedings of the 1990 American Control Conference, pp. 2626-2631, 1990.

P.P. Vaishnava, C.A. Taylor II, and C.L. Foiles, "Electron-Energy-Loss Spectroscopy of YBa2Cu3-xFexO7-y Superconductors," Physics Review, B41, p. 4195, 1990.

B.S. Thompson and M.V. Gandhi, "Smart Materials," Encyclopedia of Britannica Science and the Future 1991 Year Book, pp. 162-171, 1990.

M.V. Gandhi, B.S. Thompson, and F. Fischer, "Manufacturing Process-Driven Design Methodologies for Components Fabricated in Composite Materials," Composites Manufacturing, 1, pp. 32-40, 1990.

T. Imai, B.R. Harte, and J.R. Giacin, "Partition Distribution of Aroma Violated from Orange Juice into Selected Polymeric Sealant Films," Journal of Food Science, 55(1), p. 158, 1990.

M.A. Schroeder, B.R. Harte, J.R. Giacin, and R.J. Hernandez, "Effect of Flavor Sorption on Adhesive and Cohesive Bond Strengths in Laminations," Journal of Plastic Film and Sheeting, 6, p. 232, 1990.

E.D. Goodman and J.H. Oliver, "Direct Dimensional N/C Verification," Computer-Aided Design, 22(1), pp. 3-10, 1990.

D.S. Grummon, R. Schalek, A. Ozzello, and L.T. Drzal, "Modification of Fiber-Matrix Adhesion in Polyethylene Reinforced Composites by Energetic Ion Irradiation," Structural Composites: Design and Processing Technology, American Society for Metals, pp. 155-162, 1990.

C. Lee and D.S. Grummon, "Diffusion Bonding of Continuous SiC and Al2O3 Fibers in Boron Doped Nickel Aluminide," Structural Composites: Design and Processing Technology, American Society for Metals, pp. 585-592, 1990.

J. Kalantar, L.T. Drzal, and D.S. Grummon, "Interfacial Shear Strength of Ion Implanted Aramid Fibers," Proceedings of 13th Annual Meeting of the Adhesion Society, pp. 315-320, 1990.

C. Lee, D.S. Grummon, and G. Gottstein, "Microstructure and Interface Behavior in Diffusion Bonded Ni3A1+B Matrices Containing Continuous Al2O3 Fibers," Intermetallic Matrix Composites, Editors D. Anton, P. Martin, R. McMeeking and D. Miracle, Materials Research Society Proceedings Symposium, 194, pp. 301-306, 1990.

J. Kalantar, L.T. Drzal, and D.S. Grummon, "Structural Properties of Liquid Crystalline Polymers and their Influence of Fiber Adhesion," Controlled Interphases in Composite Materials II, Editor Ishida, Proceedings of the 3rd International Conference on Composite Interfaces, pp. 685-690, 1990.

J. Kalantar, D.S. Grummon, L.T. Drzal, I.H. Loh, and R.A. Moody, "Effect of Ti+, Ar+, N+ and He+ Ion Implantation on Aramid Fiber Adhesive Properties," Tailored Interfaces in Composite Materials, Editors C.G. Pantano and E.J.H. Chen, Materials Research Society Symposium Proceedings, 170, pp. 315-321, 1990.

M.C. Hawley and J.D. DeLong, "Polymer Reaction Engineering in Composite Materials," Chemical Reaction Engineering III (NSF), 1990.

J. Wei, Y. Chang, V. Adegbite and M.C. Hawley, "Continuous Microwave Processing of Conductor Reinforced Composite Materials," 6th Annual ASM/ESD Advanced Composites Conference/Exposition Session on Emerging Structured Composites Technology I, 1990.

A.K. Jain, F. Farrokhnia, and D. Alman, "Texture Analysis of Automotive Finishes," Proceedings of Vision '90, pp. 8.1-8.16, 1990.

S. Shibata, I. Jasiuk, T. Mori, and T. Mura, "Successive Iteration Method Applied to Composites Containing Sliding Inclusions: Effective Modulus and Anelasticity," Mechanics of Materials, 9, pp. 229-243, 1990.

E. Tsuchida, D. Kouris, and I. Jasiuk, "The Hemi-Spherical Inhomogeneity Subjected to a Concentrated Force," Micromechanics and Inhomogeneity - The Toshio Mura Anniversary Volume, edited by G.J. Weng, M. Taya, and H. Abe, Springer-Verlag, New York, pp. 497-509, 1990.

Y. Tong and I. Jasiuk, "Thermal Stresses and Thermal Expansion Coefficients of Composites Reinforced with Coated Spherical Particles," Controlled Interphases in Composite Materials, Edited by Ishida, Elsevier, New York, pp. 539-548, 1990.

Y. Tong and I. Jasiuk, "Transverse Elastic Moduli of Composites Reinforced with Cylindrical Coated Fibers: Successive Iteration Method," Proceedings of the American Society of Compsites, Technomic, Lancaster, pp. 117-126, 1990.

C. Chmielewski, C.A. Petty, and K. Jayaraman, "Crossflow of Elastic Liquids through Arrays of Cylinders," Journal of Non-Newtonian Fluid Mechanics, 35, pp. 309-325, 1990.

C. Chmielewski, K.L. Nichols, and K. Jayaraman, "A Comparison of Drag Coefficients of Spheres in Corn Syrup Based on Polybutene based Boger Fluids," Journal of Non-Newtonian Fluid Mechanics, 35, pp. 37-49, 1990.

R.J. Hernandez, J.R. Giacin, K. Jayaraman, and A. Shirakua, "Diffusion and Sorption of Organic Vapors through Oriented Poly(ethylene terephthalate) Films of Varying Thermomechanical History," SPE Technical Papers, 36, pp. 557-559, 1990.

C. Chmielewski, C.A. Petty, and K. Jayaraman, "Crossflow Permeation of Viscoelastic Liquids in Cylinder Arrays," Proceedings of the 5th Technical Meeting of the American Society for Composites, pp. 557-565, June, 1990.

K. Jayaraman, M.C. Hawley, C.A. Petty, E.A. Grulke, and L.T. Drzal, "Composite Materials Processing Course at Michigan State University," Proceedings of the Symposium on Composite Education in the United States at the 35th International SAMPE Meeting, pp. 21-27, April , 1990.

M.M. Koochesfahani and Smiljanovsky, V., "Effect of initial acceleration on the development of the flow field of an airfoil pitching at constant rate," Proceedings of the NASA/AFOSRIARO Workshop on Physics of Forced Unsteady Separation, April 17-19, 1990, NASA Ames Research Center; NASA Conference Publication 3144, 1992, pp.317-332, 1990.

M.M. Koochesfahani, "Velocity and vorticity fields in the wake of a non-sinusoidally oscillating airfoil," Bull. Am. Phys. Soc., 35(10), 2307, 1990.

Brown, T.A. and M.M. Koochesfahani, "Effect of motion trajectory on flow development around airfoils pitching to large angles of attack," Bull. Am. Phys. Soc., 35(10), 2244, 1990.

A. Lee, "Effects of Porosity on Structural Performance of Advanced Thermoplastic Composites," ASTM Symposium on Damage Detection and Q.A. in Composites, 1990.

A. Lee and G.B. McKenna, "The Physical Aging Response of An Epoxy Glass Subjected to Large Stress," Polymer, 31, p. 423, 1990.

D. Liu, "Delamination Resistence in Stitched and Unstitched Composite Plates Subjected to Impact Loading," Journal of Reinforced Plastics and Composites, 9(1), pp. 59-69, 1990.

D. Liu, "Photoelastic Study on Composite Stitching," Experimental Techniques, 14(1), pp. 25-27, 1990.

C. Lee and D. Liu, "Tensile Strength of Stitching Joints in Woven Glass Fabrics," Journal of Engineering Materials and Technology, 112(2), pp. 125-130, 1990.

W. Cha, D.M. Bott, and J.R. Lloyd, "Thermal Aspects of Electrorheological Fluid Based Composite Materials," Proceedings of American Society of Composites, Fifth Technical Conference, pp. 797-808, 1990.

S.M. Bajorek, J.R. Lloyd, and J.R. Thome, "Evaluation of Multicomponent Pool Boiling Heat Transfer Coefficients," International Heat Transfer Conference, p. 6, 1990.

H.Q. Yang, K.T. Yang, and J.R. Lloyd, "A Control Volume Finite Difference Method for Buoyant Flow in Three-Dimensional Curvilinear Non-Orthogonal Co-Ordinates," International Journal of Numerical Methods in Fluids, 10, pp. 199-211, 1990.

J.P. Lucas, "Delamination Fracture: Effects of Fiber Orientation on Fracture of a Continuous Fiber Composite Laminate," Engineering Fracture Mechanics, pp. 543-561, 1990.

J. Wille and J.J. McGrath, "3-D Analysis of Injection Molding," Poster Presentation, Fifth Technical Conference of the American Society for Composites, Composites in Transition, 1990.

S.E. Keinath and R.J. Morgan, "Moisture Content of Aramid and Polybenzimidazole Fibers," Thermochimica Acta, 166, 17-26, 1990.

R.J. Morgan and R.E. Allred, "Aramid Fiber Composites," Chapter in International Encyclopedia for Composites, Ed. S.M. Lee, VCH Publishers, Vol.1, pp. 37-56, 1990.

R.J. Morgan, "Aging of Polymer Matrix Fibrous Composites," Chapter in International Encyclopedia for Composites, Ed. S.M. Lee, VCH Publishers, Vol. 1, pp. 15-26, 1990.

J.A. H.De.Pruneda and R.J. Morgan, "The Effects of Thermal Exposure on the Structural and Mechanical Integrity of Carbon Fibers," Journal of Materials Science, 25, 4776-4781, 1990.

O.U. Anders, K.P. Battjes, S.E. Keinath, and R.J. Morgan, "Micromechanisms of High Performance Organic Fibers in Composite Performance," Proceedins of American Society for Composites 5th Technical Conference, East Lansing, MI, pp. 269-275, June 1990.

R. Jurek, D.E. Larive, M. Wood, R.J. Morgan, C. Tung, and T. Donnellan, "Processing and Toughening of Bismaleimide - Carbon Fiber Composites," Proceedins of American Society for Composites 5th Technical Conference, East Lansing, MI, pp. 229-238, June 1990.

R.J. Morgan, R. Jurek, D.E. Larive, C.M. Tung, and T. Donnellan, "The Toughening of Bismaleimides," The Third International Symposium on Toughened Plastics, Proceedins of ACS Division of Polymeric Materials Science and Engineering, 63, pp. 681-685, 1990.

R.J. Morgan, C.M.R. Dunn, E. Fouch, E.J. English, P.J. Hogg and S. Turner, "The Durability and Synergistic Environmental Testing of Polymer Matrix Fibrous Composites," Proceedings of 6th ASM/ESD Advanced Composites Conference, Detroit, MI, pp. 205-209, 1990.

R.J. Morgan, D.E. Larive, Y.H. Huang, K.P. Battjes and Z. Yuan, "Fill-Flow Characteristics and Void Formation Mechanisms During Resin Transfer Molding as a Function of Preform Structure," Proceedings of 6th ASM/ESD Advanced Composites Conference, Detroit, MI, pp. 229-233, 1990.

R.J. Morgan, R. Jurek, D.E. Larive, E.J. English, C.M. Tung and T. Donnellan, "Structure-Property Relations of High Temperature Polymer Matrices and Their Composites," Proceedings of 22nd Int'l SAMPE Technical Conference, Boston, 22, pp.145-156, 1990.

M. Tayal, P.A.A. Kahan, T.T. Lei, and K. Mukherjee, "Selective Hardening of Medium Carbon Steel with Nd-YAG Laser," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 71, 1990.

P.A.A. Khan, K. Mukherjee, M. Tayal, M. Cherif, and H. Huber, "High Speed Precision Laser Cutting of Hardwoods," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 233, 1990.

K. Mukherjee, P.A.A. Khan, and M. Tayal, "Laser Machining of Composites," Laser Materials Processing III, The Minerals, Metals and Materials Society Publication, p. 217, 1990.

K. Mukherjee, G.E. Lang, P.A.A. Kahan, and M. Tayal, "Manufacturing of High-Temperature Superconductors by using a Nd-YAG Laser," Laser Materials Processing III, TMS Publications, p. 159, 1990.

K. Mukherjee and N.B. Dahotre, "Development of Microstructure in Laser Surface Alloying of Steel with Chromium," Journal of Materials Science, 25, p. 445, 1990.

K. Mukherjee, C.S. Lee Pack, O.T. Inal, and Han-ryong Pak, "Crystal Structures and Microstructures of (Ni, Cu) Sn alloys," Journal of Material Science and Engineering, A130, p. 83, 1990.

K. Mukherjee, T. Grandzwell, P.A.A. Khan, and C.W. McMillin, "Gasflow Parameters in Laser Cutting of Wood: Nozzle Design," Forest Products Journal, 40, p. 39, 1990.

Wood, R. Narayan, K. R. Stringham, S. L. Huang, and Henry Leehe, "Characterization of the oil extract of an Indiana Shale", Fuel Proc. Tech., 26, 73-81, 1990.

C.J. Biermann and R. Narayan, "Grafting of Polyethyleneimine onto Cellulose Acetate," Carbohydrate Polymers, 12, p. 323, 1990.

R. Narayan and R.P. Neu, "Composite Systems of Lignocellulosics with Synthetic Polymers," Materials Research Society, Symposium Proceedings, 197(55), pp. 55-56, 1990.

S.L. Gunderson, R. Narayan, and R.C. Schiavone, "An Overview of Three Biotechnology Areas for the Development of Advanced Composite Materials and Structures," Proceedings of American Society for Composites, Fifth Technical Conference, Technomic Publishing Company, p. 165, 1990.

R. Narayan, "Recycling Back to Nature - Environmental Degradable Plastics," Chapter One AIChE Student Journal, 4(13), 1990.

M. Ostoja-Starzewski and C. Wang, "Linear Elasticity of Planar Delaunay Networks -II: Voigt and Reuss Bounds, and Modification for Centroids," Acta Mechanica, 84, pp. 47-61, 1990.

M. Ostoja-Starzewski, "A Generalization of Thermodynamic Orthogonality to Random Media," Journal of Applied Mathematics and Physics (ZAMP), 41, pp. 701-712, 1990.

T.J. Pence and J. Song, "Buckling Instabilities in Highly Deformable Composite Laminate Plates," Proceedings of the American Society for Composites Fifth Technical Congress, pp. 459-468, 1990.

C. Chmielewski, C.A. Petty, and K. Jayaraman, "Crossflow of Elastic Liquids Through Arrays of Cylinders," Journal of Non-Newtonian Fluid Mechanics, 35, p. 309, 1990.

C.J. Radcliffe, A.J. Hull, and S.C. Southward, "Global Active Noise Control of a One-Dimensional Acoustic Duct Using a Feedback Controller," ASME Journal of Dynamic Systems, Measurement and Control, ASME Winter Annual Meeting, 1991.

J. DeLong, K.J. Hook, M.J. Rich, and L.T. Drzal, ASpectroscopic Characterization of Fiber-Polymer Interphases, Controlled Interphases in Composite Materials, p.87, H. Ishida, Elsevier Press, NY, 1990.

L.T. Drzal, M.J. Rich, and S. Subramoney, AFiber-Matrix Bonding and its Effect on Composite Properties, 3rd ASM/ESD Advanced Composites Conference, 141-154, 1990.

L.T. Drzal, M.J. Rich, M. Madhukar, and P. Herrera-Franco, ACharacterization of Fiber-Matrix Adhesion in Composite Materials, 6th ASM/ESD Advanced Composites Conference, 141-154, 1990.

A.B. Scranton and N.A. Peppas, "A Statistical Model of Free-Radical Copolymerization/Crosslinking Reactions," Journal of Polymer Science, Polymer Chemistry, 28, p. 39, 1990.

A.B. Scranton, A.G. Mikos, L.C. Scranton, and N.A. Peppas, "The Physical Mechanism for the Production of Hydrophilic Polymer Microparticles from Aqueous Suspensions," Journal of Applied Polymer Science, 40, p. 997, 1990.

A.B. Scranton, J. Klier, and N.A. Peppas, "Soluble Chain Fractions in Hydrophilic Polymer Networks: Origin and Effect on Dynamic Uptake Overshoots," Polymer, 31, p. 1288, 1990.

J. Klier, A.B. Scranton, and N.A. Peppas, "Self Associating Networks of Poly (Methacrylic Acid-g-Ethylene Glycol)," Macromolecules, 23, p. 4944, 1990.

A.B. Scranton and N.A. Peppas, "A Statistical Model of Free-Radical Copolymerization /Crosslinking Reactions," Journal of Polymer Science, Polymer Chemistry, 28, p. 39, 1990.

A.B. Scranton, A.G. Mikos, L.C. Scranton, and N.A. Peppas, "The Physical Mechanism for the Production of Hydrophilic Polymer Microparticles from Aqueous Suspensions," Journal of Applied Polymer Science, 40, p. 997, 1990.

A.B. Scranton, J. Klier, and N.A. Peppas, "Soluble Chain Fractions in Hydrophilic Polymer Networks: Origin and Effect on Dynamic Uptake Overshoots," Polymer, 31, p. 1288, 1990.

J. Klier, A.B. Scranton, and N.A. Peppas, "Self Associating Networks of Poly(Methacrylic Acid-g-Ethylene Glycol)," Macromolecules, 23, p. 4944, 1990.

S.E. Selke, "Plastics Disposal--What are the Options," SAE 1989 Transactions, 98(Sec. 5), pp. 392-396, 1990.

K.D. Pae, D.-L. Tang, and E.E. Shin, "Pressure Dependence of Glass Transition Temperature of Elastomeric Glasses," Journal of Applied Physics, 56, No.9, p2426, November 1989.

P. Soroushian, "Tensile Strength of Steel Fiber Reinforced Concrete: Correlation with some Measures of Fiber Spacing," American Concrete Institute Materials Journal, 87(6), pp. 541-546, 1990.

P. Soroushian and A. Khan, "Development and Characterization of Hybrid Polyethylene Fiber Reinforced Cement Composites," Proceedings of Fifth Technical Conference of the American Society for Composites, 6, pp. 719-732, 1990.

A. Kamel and J. Sticklen, "An Artificial Intelligence-Based Design Tool for Thin Film Composite Materials," Proceedings of the Fifth Technical Conference for Composites, pp. 375-381, 1990.

K.N. Subramanian and R. Vaidya, "Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composites," Journal of Material Science, 25, p. 3291, 1990.

K.N. Subramanian and R. Vaidya, "Effect of Ribbon Orientation on the Fracture toughness of a Metallic-Glass Ribbon Reinforced Glass-Ceramic Matrix Composite," Journal of American Ceramic Society, 73, p. 2962, 1990.

K.N. Subramanian and J.C. Lee, "Rolling of Sicp Reinforced Aluminum Alloy Composites," Proceedings of the Sixth Annual ASM/ESD Advanced Composite Conference, published by ASM, p. 575, 1990.

K.N. Subramanian and R. Vaidya, "Stress Transfer in a Metallic-Glass Ribbon Reinforced Epoxy Matrix Composite," Journal of Material Science Letters, 9, p. 1397, 1990.

B.S. Thompson and M.V. Gandhi, "Smart Materials," Encyclopedia Britannica Science and the Future 1991 Year Book, pp. 162-171, July, 1990.

M.V. Gandhi, B.S. Thompson, and F. Fischer, "Manufacturing-Process-Driven Design Methodologies for Components Fabricated in Composite Materials," Composites Manufacturing, 1, pp. 32-40, 1990.

R. Zapp, B. Ho, and N.H. Wang, "Attenuation and Velocity Imaging and Biological Tissues by Broadband Ultrasonic Signals," Fifteenth International Symposium on Ultrasonic Imaging, June 1990.

R. Zapp, B. Ho, and T.S. Chen, "Mapping of Internal Temperature

Distribution by Ultrasound," Fifteenth International Symposium on Ultrasonic Imaging, June 1990.

R. Zapp, B. Ho, and T.S. Chen, "Evaluation of Tissue Attenuation Property by a Bidirectional Pulse-Echo Interrogation Technique," Fifteenth International Symposium on Ultrasonic Imaging, June 1990.

R. Zapp, B. Ho, and N.H. Wang, "Nondestructive Evaluation of Material Properties by Broadband Signal Technique," Fifth Technical Conference of the American Society for Composites, June 1990.

R. Zapp, B. Ho, N.H. Wang, and M. Rich, "High Range Resolution Ultrasonic Imaging for Evaluation of Layered Composite Materials," Fifth Technical Conference of the American Society for Composites, June 1990.

Q. Zheng, W.F. Oliver, J.L. Green, G. Wolf and C.A. Angell, "Homogeneous Nucleation of Cavities in Water under Extreme Tension, and Support for Speedy's Stability Limit Conjecture," Proceeding of American Physical Society Meeting, pp 401, 12-16, Anaheim, CA, March 1990.